Parasound HCA-2200II owner manual Case of Trouble Fuses

Page 7

In Case of Trouble

Fuses

The HCA-2200II has five external fuses which may blow as a result of an internal fault condition. This protects the unit from possible damage to internal parts. Never replace any fuse with a larger value. Substi- tution of a larger fuse may create serious stress or damage to internal parts and will void your warranty.

It is particularly important to replace the 10 ampere B+ and B- fuses with the same value and brand as the originals to preserve the impedance symmetry of the power supply. Use only Littlefuse brand fuses. The brand of the 15 ampere main fuse is not as critical to sound quality.

If you suspect a problem with this unit, first recheck all your connections. If one channel is

inoperative, the trouble may be caused by another component or even a defective hookup cable. If only one channel is out for all sources, try reversing the L and R cables to the power amplifier (turn it off before moving wires). If the same channel stays out, it indicates trouble with the power amplifier itself. We suggest you contact your authorized Parasound dealer or call Parasound Technical Service if you suspect a problem. We will suggest other diagnostic tests you can easily perform yourself and which will save you a lot of trouble.

If it is determined that the HCA-2200II should be returned for inspection and possible servicing, you must first obtain a Return Authorization number. You will be asked to re-pack the unit in its original styrofoam packing and both of its cardboard cartons for proper protection in transit. You should send the unit by UPS with adequate insurance specified.

Units that arrive without the correct Return Authorization number, without a suitable shipping carton or evidence of improper internal packing or collect will be refused. We cannot accept collect shipments. After repair under warranty, the unit will be returned to you via prepaid UPS. If we found no problem with the unit, we will ship the unit by UPS collect for return shipping charges.

Image 7
Contents Unpacking Lnput connections Placement of your HCA-2200IIRack Mounting the HCA-2200II Making ConnectionsFront Panel Rear Panel Mono lnput and Output Mono/Stereo Switch Speaker connections PolarityBi-Wiring Use good wireAC Line cord Breaking-in the HCA-2200II Operating the HCA-2200IIStandby/Operation LEDs Current Overload LEDsCase of Trouble Fuses TIM Parasound HCA-2200II SpecificationsSpecial Features About the Designer of the HCA-2200II Product Advisory Parasound HCA-2200IIPlease Stay in Touch Parasound Limited Warranty USA only