Agilent Technologies 81133A, 81134A brochure Reconnect the DUT

Page 9

Reconnect the DUT

When you are done, you can reconnect the DUT by clicking the following softkey:

If you attach a scope (as DUT), you can immediately see the signal

You can use the generator’s trigger output to trigger the scope.

The LEDs tell you which outputs are enabled

Enable the Trigger Output ...

... or press the Trigger Out softkey

Switch to Aux Page

Now you can view the data pattern and the trigger output signal

on your oscilloscope

Image 9

Contents Agilent Pulse Generator Revision Safety SummaryInstalling the Agilent 81133A and 81134A Main Getting Started with the Agilent 81133A and 81134AChannel DataRotate Press Press and rotate Changing ParametersOr, to change one digit Now let´s change a number fieldPress the navigation knob once to focus at the number field Use the arrows next Enter a value Navigation knobThese define the signal that will be generated Setting Up a Data PatternProtect the DUT Now let’s set the instrument parametersNow let’s set the data Reconnect the DUT Your advantages are What Else You Can DoUsing the Pulse Generators Remote Control Interfaces Requirements and Possibilities for Remote ControlFor more information, please visit us at Agilent Corporate Information, Product Numbers