Engine/shaft assembly, Handle assembly

To do this, rotate the cap intil the two holes coincide.

4)Assemble nylon string head as illustrated:

a)Flange guard - b) Upper cap - c) Guard d) Nylon string head

Tighten counterclockwise.

5)While tightening, the head assembly can be held fast by inserting the wrench or the screw- driver supplied into the holes as already shown for blade assembly.

WARNING: Do not use the guard for the nylon string head when using a metal blade.

G. Engine/shaft assembly

BACK-PACK BRUSHCUTTER

See sections BACK-PACK BRUSHCUTTER.

DANGER. Do not run engine without shaft attached as clutch could fly off.

1)Assemble the engine onto the shaft. Make sure the shaft is fully and correctly engaged up to the shank, then tighten the 2 screws (A) in a criss-cross sequence.

2)Fit the end of the trigger cable connector (B) into the slot on swivel (C).

3)Adjust the screw (D) of the trigger cable connector so that the cable can easily slide in the opening with a play of 1 mm before operat- ing the swivel (C).

Tighten now the hexagonal nut (E).

4A) Stop switch (STOP) cable: fit the connection.

4B) Earth lead: connect as illustrated.

H. Handle assembly

1) DOUBLE HANDLE

2) DELTA FRONT HANDLE

Handle (A) can be adjusted for individual operator comfort by swivelling it forwards or backwards. To do this, loosen button (C), position the handle for maximum comfort, then tighten button (C) securely. Clip the suspension harness hook into one of the 5 holes on the top side of the shaft support to achieve the best balance according to the type of work to be undertaken.

NB: Handle assembly (A) can be folded parallel to the shaft to facilitate transportation or storage. To do this, loosen knob (C), twist support (B) 90° in a clockwise direction, fold the handle (A) into the required position and then tighten knob (C).

Secure the handle in front of the label placed on the shaft 11 cm from the rear grip when assembling nylon string head and 36 cm when assembling metallic blades. This position ensures optimum balance and safety. The handle must be perpendicular to the shaft as illustrated (Fig.2).The handle bar must be mounted using all the items supplied and in the exact configuration shown in figures 1 or 2.

3)DOUBLE HANDLE

Adjust and secure double hand clamp by tight- ening the screws.

I. Starting and stopping the engine

WARNING: Before using the product every user should carefully read the sections SAFETY, SAFETY USAGE and SYMBOL MEANINGS.

STARTING A COLD ENGINE

1)Position the on/off switch to the I (ON) position, away from the «STOP» position.

2)Rotate the choke lever in the direction illustrated by the arrows. This engages the fast idle system.

3)Squeeze the primer bulb (C) several times until you see fuel begin to return back through the tube (D) towards the fuel tank. Push the decompression valve (B)

down if your models is fitted with one. Pull the starter handle until the engine starts.

4)Hold the machine safely and allow the engine to run for a few seconds. Grip the control handle firmly, pushing down on the safety trigger (S) and then squeezing the accelerator trigger (A). This action automatically releases the spring loaded choke lever (E) dis- engaging the fast idle system.

WARNING: The fast idle system does cause the cutting attachment to rotate when engaged.

ENGLISH - 5

95390039200, 95390038900, 95390039000, 95390039100, 95390038600 specifications

The Electrolux 95390041400 series encompasses a range of high-performance vacuum cleaner components designed to enhance cleaning efficiency and convenience for users. This series includes models such as the 3825/38 cc, B 342 X / 34 CC, 3325/34 cc, and 3930/38 cc, each equipped with cutting-edge technologies and distinctive features tailored to meet diverse cleaning needs.

One of the standout characteristics of the Electrolux 95390041400 series is its powerful suction capabilities. These models utilize advanced motor technologies that generate strong airflows, ensuring effective dirt and dust removal from various surfaces. The suction power is adjustable in many models, allowing users to customize the cleaning experience according to the specific type of flooring or surface being cleaned.

The design of these vacuum cleaners is also remarkable. Lightweight and ergonomically crafted, they offer ease of maneuverability, enabling users to navigate around furniture and tight corners without difficulty. The compact build is coupled with a variety of attachments, including crevice tools and upholstery brushes, which provide versatility in cleaning different areas of the home.

Another significant feature of this series is the incorporation of advanced filtration systems. Many models come equipped with HEPA filters that capture tiny allergens and particles, making them an excellent choice for allergy sufferers. The filtration system ensures that the air expelled is cleaner than the air in the home, contributing to a healthier living environment.

The Electrolux 95390041400 series also emphasizes ease of use and maintenance. Features such as bagless designs and easy-to-empty dust containers reduce the hassle of cleaning and maintenance. Additionally, the models typically include a variety of indicator lights, alerting users when the dust container needs emptying or when filters require replacement.

In terms of aesthetics, the series features sleek and modern designs that are not only functional but visually pleasing. The appliances come in various colors and finishes, allowing them to blend seamlessly into different home decors.

Overall, the Electrolux 95390041400 series demonstrates a commitment to quality and user-friendly design. With powerful suction, advanced filtration, and versatile attachments, these models are well-suited for meeting the challenges of modern home cleaning while keeping user comfort and health in mind.