Carburettor adjustment | Electrolux 95390047500, B 412 X / 42 CC

STARTING A WARM ENGINE

Position the on/off switch to the I (ON) position. Squeeze the primer bulb (C) several times until you see fuel begin to return back through tube (D) to the fuel tank. Push the decompression valve (B) down if your model is fitted with one. Pull the starter handle until the engine runs.

5)STOPPING THE ENGINE

Push the on/off switch to the STOP position. WARNING: After the engine has been

switched off, the rotating cutting attachment, blade or string head, will continue to rotate for a few seconds due to their inertia. Continue to hold the machine firmly off the ground until it stops completely. Keep your hands away whilst it is moving.

N.B. In an emergency, the cutting attachment can be stopped quickly by touching it parallel to the ground after moving the switch to the «STOP» position.

L. Carburettor adjustment

To adjust the idle speed, however, proceed as fol- lows:

With engine running and warm, slowly turn screw ‘T’ clockwise until the engine runs smoothly with a consistent noise level but without making the cutting head rotate.

If the cutting attachment does move or the engine runs too fast, slowly turn screw ‘T’ in an anti- clockwise direction until the correct speed is obtained.

Precise numerical engine speed settings are men- tioned in the technical detail chart in the front of the owner’s manual.

M. Regular maintenance

From time to time ensure all screws are tight. Replace damaged, worn, cracked or warped blades. Always make sure nylon string head or blade have been assembled correctly (see sec- tions NYLON STRING HEAD and BLADE ASSEMBLY) and blade fastener is tightened.

1)AIR FILTER CLEANING

(at least every 25 working hours).

A dust clogged air filter may cause carburetor problems.

This may prevent the engine from reaching its maximum speed and cause high fuel con- sumption and/or difficult starting.

Remove filter cover as shown in figure 1. Carefully clean the inside of filter box. The filter can also be cleaned with compressed air.

N.B. Slide the air filter back into its location (C) ensuring the tabs (A) are pointing downwards as illustrated, ensure it clicks firmly into its airtight position.

2)Every 50 working hours inject the gearcase with gear grease under high pressure through hole (C).

3)SPARK PLUG

From time to time (at least every 50 hours) remove and clean the spark plug and check the electrode gap (0,5/0,6 mm.). Replace spark plug about every 100 working hours or whenever it is extremely encrusted. Heavily encrusted electrodes can result from wrong fuel mixture (too much oil in the petrol) or a poor quality of oil in the fuel mix. Check and correct.

4)FUEL FILTER

To change fuel filter remove the tank cap and pull out the filter with a piece of bent wire or long forceps. Contact your Service Station for general servicing and cleaning of internal parts at least once a year.This will reduce the possi- bility of unexpected problems and will ensure maximum product life and efficiency.

REGULARLY: it is important, in order to avoid engine overheating, to remove dust and dirt from slots, gaps and from in between cylinder fins using a wooden scraper.

LONG STORAGE: empty fuel tank and run engine until dry.

Store trimmer in a dry place.

ENGLISH - 6

95390039200, 95390038900, 95390039000, 95390039100, 95390038600 specifications

The Electrolux 95390041400 series encompasses a range of high-performance vacuum cleaner components designed to enhance cleaning efficiency and convenience for users. This series includes models such as the 3825/38 cc, B 342 X / 34 CC, 3325/34 cc, and 3930/38 cc, each equipped with cutting-edge technologies and distinctive features tailored to meet diverse cleaning needs.

One of the standout characteristics of the Electrolux 95390041400 series is its powerful suction capabilities. These models utilize advanced motor technologies that generate strong airflows, ensuring effective dirt and dust removal from various surfaces. The suction power is adjustable in many models, allowing users to customize the cleaning experience according to the specific type of flooring or surface being cleaned.

The design of these vacuum cleaners is also remarkable. Lightweight and ergonomically crafted, they offer ease of maneuverability, enabling users to navigate around furniture and tight corners without difficulty. The compact build is coupled with a variety of attachments, including crevice tools and upholstery brushes, which provide versatility in cleaning different areas of the home.

Another significant feature of this series is the incorporation of advanced filtration systems. Many models come equipped with HEPA filters that capture tiny allergens and particles, making them an excellent choice for allergy sufferers. The filtration system ensures that the air expelled is cleaner than the air in the home, contributing to a healthier living environment.

The Electrolux 95390041400 series also emphasizes ease of use and maintenance. Features such as bagless designs and easy-to-empty dust containers reduce the hassle of cleaning and maintenance. Additionally, the models typically include a variety of indicator lights, alerting users when the dust container needs emptying or when filters require replacement.

In terms of aesthetics, the series features sleek and modern designs that are not only functional but visually pleasing. The appliances come in various colors and finishes, allowing them to blend seamlessly into different home decors.

Overall, the Electrolux 95390041400 series demonstrates a commitment to quality and user-friendly design. With powerful suction, advanced filtration, and versatile attachments, these models are well-suited for meeting the challenges of modern home cleaning while keeping user comfort and health in mind.