Electrolux 295 manual Fueling Engine, BAR and Chain Lubrication, Important points to remember

Page 8
BURETOR ADJUSTMENT
CAR-

FUELING ENGINE

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality

2-cycle air-cooled engine oil. We

recommend FRIGIDAIRE HOME PRODUCTS brand oil. If you do not use this oil, use a good quality 2-cycle air-cooled oil designed to be mixed at a ratio of 40:1 (A 40:1 ratio is obtained by mixing 3.2 onces of oil with 1 gallon of unleaded gasoline). When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules relating to fuel before fueling your unit.

BAR AND CHAIN LUBRICATION

The bar and chain require continuous lubri- cation. Lubrication is provided by the auto- matic oiler system when the oil tank is kept filled. Lack of oil will quickly ruin the bar and chain. Too little oil will cause overheating shown by smoke coming from the chain and/ or discoloration of the bar.

In freezing weather oil will thicken, making it necessary to thin bar and chain oil with a small amount (5 to 10%) of #1 Diesel Fuel or kerosene. Bar and chain oil must be free flowing for the oil system to pump enough oil for adequate lubrication.

Genuine POULAN or POULAN PRO bar and chain oil is recommended to protect your unit against excessive wear from heat and friction. POULAN or POULAN PRO oil resists high temperature thinning. If POULAN or POULAN PRO bar and chain oil is not available, use a good grade SAE 30 oil.

SNever use waste oil for bar and chain lu- brication.

SAlways stop the engine before removing the oil cap.

Oil Cap

 

 

 

Fuel mix cap

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING: The chain must not move when the engine runs at idle speed. If the chain moves at idle speed refer to

within this manual. Avoid contact with the muffler. A hot muffler can cause serious burns.

To stop the engine move the switch to the STOP or OFF position.

To start the engine hold the saw firmly on the ground as illustrated below. Make sure the chain is free to turn without contacting any object.

SMove switch to the START or ON posi- tion.

Use only 15”---18” of rope per pull.

Hold saw firmly while pulling starter rope

Important points to remember

When pulling the starter rope, do not use the full extent of the rope as this can cause the rope to break. Do not let starter rope snap back. Hold the handle and let the rope rewind slowly.

For cold weather starting, start the unit at full choke; allow the engine to warm up be- fore squeezing the throttle trigger.

Do not cut material with the choke/fast idle lever at the FULL position.

For cold engine or warm engine after run- ning out of fuel.

NOTE: In the following steps, when the cho- ke/fast idle lever is pulled out to the full ex- tent, the correct throttle setting for starting is set automatically.

SPull the choke/fast idle lever out to the full extent.

SPull the starter rope quickly with your right hand until the engine attempts to start, then push the choke/fast idle lever

to the OFF position.

SPull the starter rope quickly with your

right hand until the engine starts.

SAllow the engine to run for approximate- ly five seconds. Then, squeeze and re- lease the throttle trigger to release the fast idle, allowing the engine to idle.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 295 Plan Ahead Operate Your SAW SafelyMaintain Your SAW in Good Working Order UnitAgainst kickback Handle Fuel with CautionKickback Reduce the Chance of Kickback Maintain ControlAvoid Pinch-Kickback Avoid Pull-InKickback Safety Features Stand with your weight evenly balanced on both feetFor gasoline powered chain saws as set by Ansi B175.1 Chain Brake CKA AngleComputed kickback angle CKA Table Attaching the BAR & ChainChecking the tension Adjusting the tensionChain Tension Fueling Engine BAR and Chain LubricationImportant points to remember For cold engine or warm engine after run- ning out of fuelChain Brake Braking function controlInertia activating function control For a warm engineImportant Points Tree Felling TechniquesFelling Large Trees Increase the possibility of kickbackBucking Using a LOG or Support Stand Cutting a Fallen TreeImportant points Types of Cutting Used for BuckingCleaning the air filter Limbing and Pruning Important PointsLimbing PruningBAR Maintenance Carburetor AdjustmentsChain Sharpening Ignition TimingYour Warranty Rights and OB Ligations The U. S. EnvironmentalEater service centers. call 1--800--554--6723MAINTENANCE, RE

295 specifications

The Electrolux 295 is an innovative and efficient appliance designed to elevate your laundry experience. It combines modern technology with user-friendly features, making it a favorite among households that value both performance and convenience.

One of the standout characteristics of the Electrolux 295 is its large capacity. With ample space, it can easily handle large loads of laundry, which is ideal for families or those who prefer to do their laundry less frequently. This capacity not only saves time but also energy, as fewer loads mean reduced energy consumption over the long term.

The appliance is equipped with advanced cleaning technologies that ensure effective stain removal and fabric care. Its proprietary UltraCare system gently washes clothes while maintaining their quality. This system uses lower wash temperatures paired with specialized detergents to deliver outstanding cleaning results without compromising the integrity of delicate fabrics.

The Electrolux 295 also features a range of wash cycles that cater to various fabric types and soil levels, providing tailored care for every load. Options include quick wash for lightly soiled clothes, heavy-duty for robust cleaning, and eco-friendly cycles that minimize water and energy use. This versatility ensures that users can find the optimum setting for their particular needs.

In terms of energy efficiency, the Electrolux 295 has been designed to meet modern standards. It boasts an impressive energy star rating, indicating that it operates with minimal energy consumption. This not only helps the environment but also reduces utility bills, making it a cost-effective choice over time.

The intuitive control panel is another feature that sets the Electrolux 295 apart. With a straightforward interface, users can easily select their desired settings without confusion. Additionally, the appliance is designed for quiet operation, which means that it can run in the background without disturbing daily activities.

Furthermore, the Electrolux 295 is built with durability in mind, featuring high-quality materials and robust construction to ensure a long lifespan. The combination of advanced technology, efficiency, and user-friendly operation makes the Electrolux 295 a standout choice for modern laundry needs. Whether you’re dealing with tough stains or simply need a reliable washer for daily use, the Electrolux 295 proves to be a versatile and reliable option in today’s market.
Top Page Image Contents