Electrolux 295 manual Chain Tension, Checking the tension, Adjusting the tension

Page 7

Inside view of Chain Brake

CHAIN TENSION

NOTE: When adjusting chain tension, make sure the bar nuts are finger tight only. At- tempting to tension the chain when the bar nuts are tight can cause damage.

Adjustment located on Chain Brake

STurn the adjusting screw counterclock- wise to move the adjusting pin almost as far as it will go to the rear. This should al- low the pin to be near the correct posi- tion. Further adjustment may be neces-

sary as you mount the bar.

SMount the bar as illustrated.

SSlide the bar toward the rear of the saw as far as possible.

SPrepare the chain by checking the prop- er direction. Without following the illus- tration it is easy to place the chain on the saw the wrong direction. Use the il-

lustration of the chain to determine the proper direction.

SPlace the chain onto the sprocket lo- cated behind the clutch drum. Fit the

chain between the teeth in the sprocket.

SStart at the top of the bar and fit chain into groove around the guide bar.

SPull the bar forward until the chain is

snug in the groove of the bar.

SHold guide bar against the saw frame and install the bar clamp. Make sure the adjusting pin is aligned with the hole in the bar. Remember this pin moves the

bar forward and backward as the screw is turned.

SReplace the bar clamp nuts and tighten finger tight. Once the chain is tensioned you will need to tighten bar clamp nuts.

Mount the Bar

Tip of Bar

Proper chain direction

Place chain onto the sprocket

Checking the tension:

Use the screwdriver end of the combination screwdriver/wrench tool to move the chain around the bar. If the chain does not rotate, it is too tight. If too loose, the chain will sag be- low the bar.

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust the chain tension by loosen- ing the bar clamp nuts and turning the adjust- ing screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting

screw 1/4 turn clockwise.

SLift up the tip of the bar and tighten the bar clamp nuts with the combination screwdriver/wrench.

SRecheck chain tension.

Chain moves freely

Lifts only 1/8 of an inch from bar.

Nuts

Adjustment

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 295 Unit Plan AheadOperate Your SAW Safely Maintain Your SAW in Good Working OrderKickback Handle Fuel with CautionAgainst kickback Avoid Pull-In Reduce the Chance of KickbackMaintain Control Avoid Pinch-KickbackChain Brake CKA Angle Kickback Safety FeaturesStand with your weight evenly balanced on both feet For gasoline powered chain saws as set by Ansi B175.1Attaching the BAR & Chain Computed kickback angle CKA TableChain Tension Adjusting the tensionChecking the tension For cold engine or warm engine after run- ning out of fuel Fueling EngineBAR and Chain Lubrication Important points to rememberFor a warm engine Chain BrakeBraking function control Inertia activating function controlIncrease the possibility of kickback Important PointsTree Felling Techniques Felling Large TreesTypes of Cutting Used for Bucking Bucking Using a LOG or Support StandCutting a Fallen Tree Important pointsPruning Cleaning the air filterLimbing and Pruning Important Points LimbingIgnition Timing BAR MaintenanceCarburetor Adjustments Chain SharpeningLigations The U. S. Environmental Your Warranty Rights and OBEater service centers. call 1--800--554--6723MAINTENANCE, RE

295 specifications

The Electrolux 295 is an innovative and efficient appliance designed to elevate your laundry experience. It combines modern technology with user-friendly features, making it a favorite among households that value both performance and convenience.

One of the standout characteristics of the Electrolux 295 is its large capacity. With ample space, it can easily handle large loads of laundry, which is ideal for families or those who prefer to do their laundry less frequently. This capacity not only saves time but also energy, as fewer loads mean reduced energy consumption over the long term.

The appliance is equipped with advanced cleaning technologies that ensure effective stain removal and fabric care. Its proprietary UltraCare system gently washes clothes while maintaining their quality. This system uses lower wash temperatures paired with specialized detergents to deliver outstanding cleaning results without compromising the integrity of delicate fabrics.

The Electrolux 295 also features a range of wash cycles that cater to various fabric types and soil levels, providing tailored care for every load. Options include quick wash for lightly soiled clothes, heavy-duty for robust cleaning, and eco-friendly cycles that minimize water and energy use. This versatility ensures that users can find the optimum setting for their particular needs.

In terms of energy efficiency, the Electrolux 295 has been designed to meet modern standards. It boasts an impressive energy star rating, indicating that it operates with minimal energy consumption. This not only helps the environment but also reduces utility bills, making it a cost-effective choice over time.

The intuitive control panel is another feature that sets the Electrolux 295 apart. With a straightforward interface, users can easily select their desired settings without confusion. Additionally, the appliance is designed for quiet operation, which means that it can run in the background without disturbing daily activities.

Furthermore, the Electrolux 295 is built with durability in mind, featuring high-quality materials and robust construction to ensure a long lifespan. The combination of advanced technology, efficiency, and user-friendly operation makes the Electrolux 295 a standout choice for modern laundry needs. Whether you’re dealing with tough stains or simply need a reliable washer for daily use, the Electrolux 295 proves to be a versatile and reliable option in today’s market.
Top Page Image Contents