Electrolux AG15538B manual Service and Adjustments, To Remove Mower, To Install Mower

Page 21

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER- VICE OR ADJUSTMENTS:

1.Depress clutch/brake pedal fully and set parking brake.

2.Place gearshift lever in neutral (N) position.

3.Place attachment clutch in “DISENGAGED” position.

4.Turn ignition key to “STOP” and remove key.

5.Make sure the blades and all moving parts have completely stopped.

6.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER

Mower will be easier to remove from the right side of tractor.

1.Place attachment clutch in “DISEN- GAGED” position.

2.Move attachment lift lever forward to lower mower to its lowest position.

3.Roll belt off engine pulley.

4.Remove small retainer spring, and remove clutch spring off pulley bolt.

5.Remove large retainer spring, slide collar off and push housing guide out of bracket.

6.Disconnect anti-sway bar from chassis bracket by removing retainer spring.

7.Disconnect suspension arms from rear deck brackets by removing retainer springs.

8.Disconnect front links from deck by removing retainer springs.

9.Raise lift lever to raise suspension arms. Slide mower out from under trac-

tor.

IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links and hook the clutch spring Into square hole in frame.

TO INSTALL MOWER

1.Raise attachment lift lever to its highest position.

2.Slide mower under tractor with deflec- tor shield to right side of tractor.

3.Lower lift lever to its lowest position.

4.Connect front links to mower deck and secure with retainer springs.

5.Connect suspension arms to rear deck brackets and secure with retainer springs.

 

Flat Washer

Small Retainer

 

 

Spring

 

 

 

 

 

Clutch Spring

 

Square Hole

 

 

Suspension

 

Small Retainer

Engine

Clutch

Arms

Spring

 

Pulley

Spring

 

 

 

Retainer

 

 

 

Spring

 

 

Front Link

Anti-Sway

 

 

Retainer Springs

Bar

 

 

(Both Sides)

Collar

 

 

 

Housing

GuideLarge RetainerDeflector Shield

SpringBracket

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model NO. AG15538B Warranty Table of ContentsSafety Rules General OperationII. Slope Operation IV. Service III. ChildrenDo not Safety Rules Customer Responsibilities Product SpecificationsUnassembled Parts HOW to SET UP Your Tractor Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery Check Tire Pressure ChecklistCheck for Proper Position of ALL Belts Check Deck LevelnessOperation Know Your Tractor Light Switch Position Turns the headlights on and offHOW to USE Your Tractor Before Starting the Engine ADD Gasoline To Start EngineMowing Tips Maintenance General Recommendations Lubrication ChartBefore Each USE Tractor Engine Clean AIR ScreenTransaxle Cooling BeltsAIR Filter CleaningMuffler Spark PlugsService and Adjustments To Install MowerTo Remove Mower SIDE-TO-SIDE Adjustment To Level Mower HousingTo Replace Mower Blade Drive Belt To Check and Adjust BrakeTo Replace Motion Drive Belt To Adjust Steering Wheel ALIGN- MentFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsTo Start Engine with a Weak BAT- Tery Replacing BatteryTo Attach Jumper Cables To Remove CABLES, Reverse OrderTo Adjust Carburetor Other BatteryFuel System Engine OILProblem Cause Correction Troubleshooting ChartExcessive Poor grass Suggested Guide for Sighting Slopes for Safe Operation

AG15538B specifications

The Electrolux AG15538B is a powerful vacuum cleaner designed to meet the needs of modern households. With its sleek, ergonomic design and advanced technologies, this model stands out in the crowded market of home cleaning appliances.

One of the standout features of the AG15538B is its powerful motor that ensures strong suction capabilities. This vacuum cleaner is engineered to efficiently pick up dust, dirt, and allergens from various floor types, including carpets, hardwood, and tiles. The multi-surface cleaning capabilities make it an ideal choice for homes with diverse flooring.

The AG15538B is equipped with a range of innovative technologies that enhance its performance. The innovative dust container is designed for easy emptying, allowing users to maintain cleanliness without the hassle of dealing with messy bags. This not only saves time but also reduces the cost of purchasing replacement bags. Additionally, the vacuum features a built-in HEPA filter, effectively trapping microscopic dust particles and allergens to provide cleaner air quality in your home.

Another remarkable aspect of the Electrolux AG15538B is its lightweight construction, making it easy to maneuver around the house. The vacuum is designed for user comfort, featuring an ergonomic handle that fits comfortably in the hand, reducing strain during cleaning sessions. With its compact design, storage is also made simple, allowing users to easily tuck it away when not in use.

Versatility is further supported by the variety of attachments that come with the AG15538B. These include specialized brushes for upholstery, crevice tools for tight spaces, and extension tubes that allow for easy cleaning of high surfaces such as ceilings and ceiling fans. The vacuum cleaner adapts to different cleaning needs, making it a versatile tool in maintaining a spotless home.

Battery life is another critical feature of the AG15538B. It boasts a long-lasting charge that enables extensive cleaning sessions without frequent interruptions for recharging. This makes it an excellent option for larger homes or for those who prefer to clean in one go.

In conclusion, the Electrolux AG15538B combines powerful suction, advanced filtration technologies, user-friendly design, and versatility to deliver an exceptional cleaning experience. Whether dealing with pet hair, allergens, or everyday dirt, this vacuum cleaner provides a comprehensive solution for all cleaning challenges, making it a valuable addition to any household.
Top Page Image Contents