Electrolux AG15538B manual To Start Engine with a Weak BAT- Tery, To Attach Jumper Cables

Page 25

TO START ENGINE WITH A WEAK BAT- TERY

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from bat- teries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BAT- TERY" in the MAINTENANCE section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure: IMPORTANT: Your tractor is equipped with a 12 volt system. The other vehicle must also be a 12 volt system. Do not use your tractor battery to start other vehicles.

TO ATTACH JUMPER CABLES -

1.Connect one end of the RED cable to the POSITIVE (+) terminal of each battery(A-B), taking care not to short against tractor chassis.

2.Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

3.Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

1.BLACK cable first from chassis and then from the fully charged battery.

2.RED cable last from both batteries.

Weak or Dead

Fully Charged

Battery

Battery

REPLACING BATTERY

WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from accidental grounding.

1.Lift seat pan to raised position.

2.Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

3.Install new battery with terminals in same position as old battery.

4.First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely. Slide terminal cover over terminal

5.Connect BLACK grounding cable to negative (-) terminal with remaining hex bolt and keps nut. Tighten securely.

Seat Pan

Terminal Cover

Keps Nut

 

Hex

 

Bolt

Positive

 

(Red)

 

Cable

Negative

 

(Black) Cable

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Model NO. AG15538B Warranty Table of ContentsGeneral Operation Safety RulesII. Slope Operation III. Children IV. ServiceDo not Safety Rules Customer Responsibilities Product SpecificationsUnassembled Parts HOW to SET UP Your Tractor Tools Required for AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidCheck Battery Check Tire Pressure ChecklistCheck for Proper Position of ALL Belts Check Deck LevelnessOperation Know Your Tractor Light Switch Position Turns the headlights on and offHOW to USE Your Tractor Before Starting the Engine ADD Gasoline To Start EngineMowing Tips General Recommendations Lubrication Chart MaintenanceBefore Each USE Tractor Engine Clean AIR ScreenTransaxle Cooling BeltsAIR Filter CleaningMuffler Spark PlugsTo Install Mower Service and AdjustmentsTo Remove Mower SIDE-TO-SIDE Adjustment To Level Mower HousingTo Replace Mower Blade Drive Belt To Check and Adjust BrakeTo Replace Motion Drive Belt To Adjust Steering Wheel ALIGN- MentFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsTo Start Engine with a Weak BAT- Tery Replacing BatteryTo Attach Jumper Cables To Remove CABLES, Reverse OrderTo Adjust Carburetor Other BatteryFuel System Engine OILProblem Cause Correction Troubleshooting ChartExcessive Poor grass Suggested Guide for Sighting Slopes for Safe Operation

AG15538B specifications

The Electrolux AG15538B is a powerful vacuum cleaner designed to meet the needs of modern households. With its sleek, ergonomic design and advanced technologies, this model stands out in the crowded market of home cleaning appliances.

One of the standout features of the AG15538B is its powerful motor that ensures strong suction capabilities. This vacuum cleaner is engineered to efficiently pick up dust, dirt, and allergens from various floor types, including carpets, hardwood, and tiles. The multi-surface cleaning capabilities make it an ideal choice for homes with diverse flooring.

The AG15538B is equipped with a range of innovative technologies that enhance its performance. The innovative dust container is designed for easy emptying, allowing users to maintain cleanliness without the hassle of dealing with messy bags. This not only saves time but also reduces the cost of purchasing replacement bags. Additionally, the vacuum features a built-in HEPA filter, effectively trapping microscopic dust particles and allergens to provide cleaner air quality in your home.

Another remarkable aspect of the Electrolux AG15538B is its lightweight construction, making it easy to maneuver around the house. The vacuum is designed for user comfort, featuring an ergonomic handle that fits comfortably in the hand, reducing strain during cleaning sessions. With its compact design, storage is also made simple, allowing users to easily tuck it away when not in use.

Versatility is further supported by the variety of attachments that come with the AG15538B. These include specialized brushes for upholstery, crevice tools for tight spaces, and extension tubes that allow for easy cleaning of high surfaces such as ceilings and ceiling fans. The vacuum cleaner adapts to different cleaning needs, making it a versatile tool in maintaining a spotless home.

Battery life is another critical feature of the AG15538B. It boasts a long-lasting charge that enables extensive cleaning sessions without frequent interruptions for recharging. This makes it an excellent option for larger homes or for those who prefer to clean in one go.

In conclusion, the Electrolux AG15538B combines powerful suction, advanced filtration technologies, user-friendly design, and versatility to deliver an exceptional cleaning experience. Whether dealing with pet hair, allergens, or everyday dirt, this vacuum cleaner provides a comprehensive solution for all cleaning challenges, making it a valuable addition to any household.
Top Page Image Contents