Tractor

Always observe safety rules when per- forming any maintenance.

BRAKE OPERATION

If tractor requires more than ﬁve (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rub- ber.

•Avoid stumps, stones, deep ruts, sharp

objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent ﬂat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are working properly. If your trac- tor does not function as described, repair the problem immediately.

•The engine should not start unless the brake pedal is fully depressed and attachement clutch control is in the disengaged position.

•When the engine is running, any at- tempt by the operator to leave the seat without ﬁrst setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any at- tempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never op- erate unless the operator is in the seat.

4.Reassemble blade bolt, lock washer and ﬂat washer in exact order as shown.

5.Tighten blade bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approve bolt shown in the Repair Parts.

	Trailing	Mandrel
	Trailing	Assembly
	Edge Up	Assembly
	Edge Up	Blade
	Flat	Blade
	Flat
	Washer
	Lock
	Washer
	Blade Bolt	Star
	Blade Bolt	Center Hole
		Center Hole

TO SHARPEN BLADE

NOTE: We do not recommend sharp- ening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and eventual damage to mower and engine.

•The blade can be sharpened with a ﬁle or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL

1.Raise mower to highest position to al- low access to blades.

2.Remove blade bolt, lock washer and ﬂat washer securing blade.

3.Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

		Center Hole
	5/8" Bolt	Blade
	or Pin	Blade
	or Pin

BATTERY

Your tractor has a battery charging system which is sufﬁcient for normal use. How- ever, periodic charging of the battery with an automotive charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

AG15538B specifications

The Electrolux AG15538B is a powerful vacuum cleaner designed to meet the needs of modern households. With its sleek, ergonomic design and advanced technologies, this model stands out in the crowded market of home cleaning appliances.

One of the standout features of the AG15538B is its powerful motor that ensures strong suction capabilities. This vacuum cleaner is engineered to efficiently pick up dust, dirt, and allergens from various floor types, including carpets, hardwood, and tiles. The multi-surface cleaning capabilities make it an ideal choice for homes with diverse flooring.

The AG15538B is equipped with a range of innovative technologies that enhance its performance. The innovative dust container is designed for easy emptying, allowing users to maintain cleanliness without the hassle of dealing with messy bags. This not only saves time but also reduces the cost of purchasing replacement bags. Additionally, the vacuum features a built-in HEPA filter, effectively trapping microscopic dust particles and allergens to provide cleaner air quality in your home.

Another remarkable aspect of the Electrolux AG15538B is its lightweight construction, making it easy to maneuver around the house. The vacuum is designed for user comfort, featuring an ergonomic handle that fits comfortably in the hand, reducing strain during cleaning sessions. With its compact design, storage is also made simple, allowing users to easily tuck it away when not in use.

Versatility is further supported by the variety of attachments that come with the AG15538B. These include specialized brushes for upholstery, crevice tools for tight spaces, and extension tubes that allow for easy cleaning of high surfaces such as ceilings and ceiling fans. The vacuum cleaner adapts to different cleaning needs, making it a versatile tool in maintaining a spotless home.

Battery life is another critical feature of the AG15538B. It boasts a long-lasting charge that enables extensive cleaning sessions without frequent interruptions for recharging. This makes it an excellent option for larger homes or for those who prefer to clean in one go.

In conclusion, the Electrolux AG15538B combines powerful suction, advanced filtration technologies, user-friendly design, and versatility to deliver an exceptional cleaning experience. Whether dealing with pet hair, allergens, or everyday dirt, this vacuum cleaner provides a comprehensive solution for all cleaning challenges, making it a valuable addition to any household.