Electrolux AG15538A manual Before Starting the Engine

Page 14

•The average lawn should be cut to ap- proximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better look- ing lawns, mow often and after moder- ate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut rela- tively high; the second to desired height.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equip- ment on rough, rolling terrain or hills.

1.Select desired height of cut.

2.Start mower blades by engaging at- tachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

Attachment Clutch Lever

“Engaged” Position

Attachemnt

Lift Lever

High Position

Low

Position

“Disengaged” Position

Deflector

Shield

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope. Use the slope guide provided at the back of this manual.

•Choose the slowest speed before start- ing up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake posi- tion and engage parking brake.

•Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

•Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recom- mended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

1.Check engine oil with tractor on level ground.

2.Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, re-

move and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

•For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Mainte- nance section of this manual).

•To change engine oil, see the Mainte- nance section in this manual.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model NO. AG15538A Table of Contents WarrantyII. Slope Operation Safety RulesGeneral Operation Do not IV. ServiceIII. Children Safety Rules Product Specifications Customer ResponsibilitiesUnassembled Parts To Remove Tractor from Carton Tools Required for AssemblyHOW to SET UP Your Tractor Before Removing Tractor from SkidCheck Battery Check for Proper Position of ALL Belts ChecklistCheck Tire Pressure Check Deck LevelnessOperation Light Switch Position Turns the headlights on and off Know Your TractorHOW to USE Your Tractor Before Starting the Engine To Start Engine ADD GasolineMowing Tips Before Each USE MaintenanceGeneral Recommendations Lubrication Chart Tractor Transaxle Cooling Clean AIR ScreenEngine BeltsMuffler CleaningAIR Filter Spark PlugsTo Remove Mower Service and AdjustmentsTo Install Mower To Level Mower Housing SIDE-TO-SIDE AdjustmentTo Check and Adjust Brake To Replace Mower Blade Drive BeltFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel ALIGN- MentTo Replace Motion Drive Belt To Remove Wheel for RepairsTo Attach Jumper Cables Replacing BatteryTo Start Engine with a Weak BAT- Tery To Remove CABLES, Reverse OrderTo Adjust Carburetor Fuel System BatteryOther Engine OILTroubleshooting Chart Problem Cause CorrectionExcessive Poor grass Suggested Guide for Sighting Slopes for Safe Operation

AG15538A specifications

The Electrolux AG15538A is a vacuum cleaner designed to cater to the needs of modern households, combining advanced technology with user-friendly features to provide efficient cleaning. This model is part of Electrolux's extensive range known for its reliability, efficiency, and innovative design.

One of the standout features of the AG15538A is its powerful motor, delivering impressive suction capabilities. This ensures that it can easily pick up dirt, dust, and debris from various surfaces, including carpets, hardwood floors, and tiles. The vacuum's suction power is complemented by its efficient filtration system, which captures allergens and fine dust particles, making the home environment healthier and more comfortable.

The vacuum cleaner incorporates a multi-cyclonic technology, which helps to separate dirt and air, ensuring that suction power remains consistent even as the dust container fills up. This feature not only enhances cleaning efficiency but also reduces maintenance, as the filters require less frequent replacement. Additionally, the bagless design allows for easy disposal of collected dirt, reducing the hassle of bag replacements and contributing to convenience.

The AG15538A is designed for ease of use, featuring an ergonomic handle and lightweight construction that make it easy to maneuver around furniture and reach high places. Its adjustable suction settings allow users to customize the cleaning experience based on the type of surface being cleaned, ensuring optimal performance on all floor types.

Another notable characteristic of this vacuum is its quiet operating system. Despite its powerful suction, the AG15538A operates at a much lower noise level compared to traditional vacuum cleaners, allowing for peaceful cleaning without disturbing other household members.

In terms of storage, the vacuum is compact, making it easy to stow away when not in use. Its longer cord also adds to the convenience, allowing users to clean larger areas without frequently changing outlets.

Overall, the Electrolux AG15538A combines modern technology with thoughtful design, making it a reliable choice for households looking for a powerful, efficient, and easy-to-use vacuum cleaner. Its advanced features reflect Electrolux’s commitment to creating innovative home appliances that enhance everyday living.
Top Page Image Contents