parasound model 5250 v.2 Specifications | 11 | |
|
|
|
Continuous RMS Power Output |
| |
20 Hz – 20 kHz, Five Channels Driven | 85 dB, 1 kHz |
|
250 watts x 5, 8 Ω | 73 dB, 10 kHz |
|
385 watts x 5, 4 Ω | 67 dB, 20 kHz |
|
Current Capacity | Damping Factor |
|
45 amps peak per channel | Over 150 at 20 Hz |
|
Frequency Response | Turn On Options – DC |
|
20 Hz – 50 kHz, | 9 – 12V, 15 mA |
|
Dynamic Headroom
1.6 dB
Total Harmonic Distortion
0.025% at full rated output
0.02% at average listening levels
IM Distortion
0.05 %
Transient IM Distortion
Not measurable
S/N Ratio
114 dB at rated output, IHF
106 dB at rated output, unweighted
93 dB at 2.828 V output, IHF
Input Impedance
33 k Ω
Turn On Options – Audio
1.2mV – 12 V, adjustable 10 minute turn off delay
AC Power Requirement
110 – 120 V / 220 – 240 V, 50 – 60 Hz 1 watt standby; 2500 watts full output
Dimensions
171⁄4” Wide
181⁄2” Deep with connectors
75⁄8” High with feet, 7” panel only
437 x 470 x 193mm, 176mm panel only
Net Weight
69 lbs., 31.4 kg
Rack Mount Accessory
May be Purchased Separately
RMK44
Input Sensitivity
1 V in for 28.28 V out, THX standard
1.6 V for full rated output
(When gain controls set to the Normal position)
Before any home theatre component can be THX Ultra2 certified, it must pass a rigorous series of quality and performance tests. Only then can a product feature the THX Ultra2 logo, which is your guarantee that the Home Theatre products you purchase will give you superb performance for many years to come. THX Ultra2 requirements cover every aspect of the product including performance and operation.
THX and Ultra2 are trademarks of THX Ltd. which may be registered in some jurisdictions. All rights reserved.
Note: Specifications are subject to change or improvement without notice.