OPERATION
KNOW YOUR CHIPPERiVAC
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHIPPERNACo Figure 17 identifies the following key features and controls on your machine:
(A)COLLECTION BAG: Used to collect material resulting from vacuuming or chipping operation,
(B)ENGINE CONTROL LEVER: Used to control the speed of the engine
(C)ENGINE PRIMER: Provides additional fuel from the
carburetor to the cylinder for use when starting a cold engine,,
(D)AIR CLEANER: Filters dirt which could damage engine parts,
(E)CHIPPER CHUTE: Used to process small branches.
(F)FUELTANK: Stores engine fuel
(G)RECOIL STARTER ROPE: Used to start the engine_
(H)BLOWER DEFLECTOR: Directs air flow when machine is used in blower configuration.
(I)SAFETY INTERLOCK ROD: Part of the safety interlock system which stops the engine if either the collection bag or blower deflector is not installed.
(J)VACUUM HOSE (OPTIONAL): Used for remote vacuuming
(K)BAFFLE PLATE: Used with optional vacuum hose°
(L)VACUUM INLET CAP: Covers vacuum hose inlet when machine is used for
(M)SPARK PLUG: Provides spark for engine ignition
(N)VACUUM HEIGHT ADJUSTMENT LEVER: Allows adjustment of the space between the bottom of the machine and the ground,
!,1
!
N
N
!.
Figure 17: Features and Controls,
17