Craftsman 917.270512 Cleaning, Engine Cooling Fins, To reassemble, reverse above proce- dure

Page 20

•If very dirty or damaged, replace pre- cleaner.

•Reinstall pre-cleaner over cartridge.

•Reinstall cover and secure with knob(s).

TO SERVICE CARTRIDGE

• Remove cartddge nut.

,,Carefully remove cartddge to prevent debds from entering carburetor. Clean base carefully to prevent debds from

entering carburetor.

•Clean cartddge by tapping gently on flat surface. If very dirty or damaged, replace cartridge.

•Reinstall cartridge, nut, precleaner, cover and secure with knob(s).

IMPORTANT: Petroleum solvents, such as kerosene, are not to be usedto clean the cartddge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry car- tddge.

Cover

Knob

CoverCartridge

Nut

Fre°a.r_leaner_ Cartridge

__aase

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent engine damage from over- heating. Clean with a wire brush or com- pressed air to remove dirt and stubbom dded gum fibers.

ENGINE COOLING FINS

Remove any dust, dirt or oil from engine coolingfins to prevent engine damage from overheating.

•Remove screws from blower housing and lift housingand dipsticktube assembly off engine.

•Cover oilfill openingto prevent entry of dirt.

•Use compressed air or stiffbdstle brush to thoroughlyclean engine coolingfins.

•To reassemble, reverse above proce- dure.

MUFFLER

Inspect and replace.corroded muffler and spark arrester (if equipped) as it could cre- ate a fire hazard and/or damage.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first.

Spark plug type and gap setting are shown in =PRODUCT SPECIFICATIONS"

on page 5 of this manual.

IN-LINE FUEL FILTER

The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carbure- tor, replacement is required.

•With engine cool, remove filter and plug fuel line sections.

•Place new fuel filter in position in fuel line with arrow pointing towards carbu- retor.

•Be sure there are no fuel line leaks and clamps are properly positioned.

•Immediately wipe up any spilled gaso- line.

Screws Blower Housing

Fuel Rlter

CLEANING

air screen

Di

Assembly

Plug

Engine Cooling

20

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automo-

tive type wax.

We do not recommend using a garden hose to clean your tractor unless the elec- trical system, muffler, air filter and carbure- tor are covered to keep water out.Water_ in engine can result in a shortened engine life.

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Raftzman + General Operation Limited 90 DAY Warranty on BatteryParts Ordering Service Slope OperationDo not ChildrenManufacturersrecommended pa when necessary TY is InvolvedProduct Specifications Maintenance AgreementPage Parts packed separately in carton Assembly Tools Required ForTo Remove Tractor from CartonHOW to SET UP YOUR-TRACTOR Check Battery Install SeatChecklist Please Review the Followinp Checklist Check Tire PressureCheck Deck Levelness Check for Proper Position ALL BeltsH L Know Your Tractor HOW to USE Your Tractor Before Starting the Engine ADD GasolineCold Weather Starting 50 F Below To Start EngineMowing Tips Lubrication Chart General RecommendationsCustomer RESPONSIBlUTIESBattery Brake OperationTires Operator Presence SystemBelts Transaxle CoolingEngine AIR FilterTo reassemble, reverse above proce- dure CleaningEngine Cooling Fins To Remove Mower To Install MowerRaise attachment lift lever to its highes position To Replace Mower Blade Drive To Level MowerhousingSIDE-TO-SIDEADJUSTMENT To Adjust Brake Belt InstallationInstall new belt in reverse order of removal To Adjust STEERINGWHEELALIGN- Ment Replacing BatteryTo Start Engine with a Weak To Attach Jumper CABLE3To Adjust Throttle Control Cable To Remove Hood and Grill AssemblyTo Replace HEADLIG.HT Bulb Interlocks and RelaysToadjust Carburetor Preliminary SettingFinal Setting Acceleration TestTractor OtherFuel System Engine OILTroubleshooting Chart Problem Troubleshooting Problem Chart CauseCorrection Dirty engine air screen/fins Dirty/cloggedmufflerTroubleshooting Chart Problemcause SlowPage Page Schematic Tractor - Model NumberTractor -- Model Number Electrical Electrical DescriptionTractor - Model Number Chassis and Enclosures Tractor - Model Number 917.270512 Chassis and Enclosures Tractor -- Model Number Ground Drive Tractor - Model Number Ground Drive KEY Part DescriptionSteering Assembly Tractor - Model Number Steering Assembly RingKlip#T5304-75Optional Equipment EngineTractor --MODEL Number Tractor - Model Number Tractor - Model Number Seat Assembly Decals Wheels & TiresTractor - Model Number Lift Assembly Shaft Asm Lift Tractor - Model Number Mower Deck #10-24 Grade 35A Part Description 23O 13z1 /lO4 Gasket SET 615 Label KITCap Washer,SpringSeal Assembly,Valve Page Iii Sears

917.270512 specifications

The Craftsman 917.270512 is a robust and versatile lawn tractor that combines power, performance, and precision to help homeowners maintain their yards efficiently. This model, part of Craftsman’s renowned line of outdoor power equipment, is designed for a variety of lawn care tasks, from mowing to hauling, making it an ideal choice for those with medium to large lawns.

One of the standout features of the Craftsman 917.270512 is its powerful engine. Equipped with a 22 horsepower Briggs & Stratton engine, this tractor provides reliable performance and ample power to tackle thick grass and uneven terrain. The engine is designed for easy starting and smooth operation, ensuring that users can get to work quickly without the frustration of complicated starting procedures.

The cutting deck on the Craftsman 917.270512 is another key feature. With a 42-inch deck, this lawn tractor offers a wider cutting path, allowing users to cover more ground in less time. The deck is also adjustable, giving the operator the flexibility to customize cutting heights between 1.5 and 4 inches, ensuring an even and well-manicured lawn. Additionally, the deck is designed with a washout port, making it easy to clean and maintain after use.

In terms of technology, the Craftsman 917.270512 incorporates a hydrostatic transmission that provides smoother acceleration and ease of operation. This type of transmission allows the operator to change speeds seamlessly without the need for manual shifting, making it simpler to navigate various terrains effortlessly. This feature is particularly beneficial for maneuvering around obstacles and tight spaces in the yard.

Comfort is a key consideration in the design of the Craftsman 917.270512. It features an ergonomic seat with ample cushioning, ensuring that the operator remains comfortable even during extended mowing sessions. The tractor's compact size also allows for easy navigation in smaller spaces, while the responsive steering enhances maneuverability.

Furthermore, the Craftsman 917.270512 is equipped with a robust set of safety features, including a safety switch that ensures the engine stops when the operator leaves the seat. This feature significantly reduces the risk of accidents, making it a safe choice for users of all ages.

In summary, the Craftsman 917.270512 lawn tractor is a powerful and versatile equipment option for homeowners seeking an efficient lawn care solution. Its reliable engine, adjustable cutting deck, hydrostatic transmission, and user-friendly design make it an excellent investment for maintaining your lawn. With the right combination of performance, comfort, and safety, the Craftsman 917.270512 is sure to be a valuable addition to your outdoor toolkit.
Top Page Image Contents