Craftsman 917.270512 To Level Mowerhousing, Side-To-Sideadjustment, To Replace Mower Blade Drive

Page 22

TO LEVEL MOWERHOUSING

Adjust the mowerwhile tractor is parked on level ground or driveway. Make sure tires are properly inflated(See "PROD- UCT SPECIFICATIONS"). If tires are over or underinflated,you will not propedy adjust your mower.

SIDE-TO-SIDEADJUSTMENT

•Raise mower to its highestposition.

•At the midpoint of both sides of mower, measure heightfrom bottom edge of

mower to ground. Distance "A" on both sides of mower should be the same or within 1/4" of each other.

•If adjustment is necessary, make adjust- ment on one side of mower only.

•To raise one side of mower, tighten lift link adjustment nut on that side.

•To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about I18".

Bottom , - - ,Bottom

ofcu. - Qfcu.

Suspension

Arm

equal in length. Both links shouldbe approximately 10-3/8".

•If linksare not equal in le_gth,_just-- one linkto same length as othei:link.

•To lower front of mower loosen nut=E"

on both front linksan equal number of turns.

•When distance"D" is 1/8" to 1/2" lower at frontthan rear, tighten nuts =F" against trunnionon both front links.

•To raise front of mower, loosen nut"F" from trunnionon both front links.

Tighten nut "E" on both front linksan equal number o.ftums.

•When distance =D" is 1/8"to 1/2" lower

at front than rear,_tighten nut "F" against trunnionon both front links.

•Recheck side-to-side adjustment.

. - Mandrel

Both Front Links Should be Equal in Length

Nut =E"

Nut "F"

Lift Link Adj

Nut

Trunnion

 

 

Recheck measurements after adjusting.

:RONT-TO-BACK ADJUSTMENT MPORTANT: Deck must be level side-to-

_ide. If the followingfront-to-back adjust- nent is necessary, be sure to adjust both

ront links equally so mower will stay evel side-to-side.

ro obtain the best cutting results, the nower housing should be adjusted so that he front is approximately 1/8" to 1/2" :}wer than the rear when the mower is in :s highest position.

;heck adjustment on fight side of tractor. /leasure distance "D" directly in front and )ehind the mandrel at bottom edge of nower housing as shown.

Before making any necessary adjust- ments, check that both front links are

Front Links Trunnion

TO REPLACE MOWER BLADE DRIVE

BELT (See Illustration Next Page) The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL

•Remove mower from tractor (See "TO REMOVE MOWER" in this section of

this manual).

•Work belt off both mandrel pulleys a_l idler pulleys.

•Pull belt away from mower.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Raftzman + Parts Ordering Limited 90 DAY Warranty on BatteryGeneral Operation Do not ServiceSlope Operation ChildrenManufacturersrecommended pa when necessary TY is InvolvedProduct Specifications Maintenance AgreementPage Parts packed separately in carton To Remove Tractor from AssemblyTools Required For CartonHOW to SET UP YOUR-TRACTOR Check Battery Install SeatCheck Deck Levelness Checklist Please Review the Followinp ChecklistCheck Tire Pressure Check for Proper Position ALL BeltsH L Know Your Tractor HOW to USE Your Tractor Before Starting the Engine ADD GasolineCold Weather Starting 50 F Below To Start EngineMowing Tips Customer Lubrication ChartGeneral Recommendations RESPONSIBlUTIESTires BatteryBrake Operation Operator Presence SystemEngine BeltsTransaxle Cooling AIR FilterEngine Cooling Fins CleaningTo reassemble, reverse above proce- dure Raise attachment lift lever to its highes position To Install MowerTo Remove Mower SIDE-TO-SIDEADJUSTMENT To Level MowerhousingTo Replace Mower Blade Drive Install new belt in reverse order of removal Belt InstallationTo Adjust Brake To Start Engine with a Weak To Adjust STEERINGWHEELALIGN- MentReplacing Battery To Attach Jumper CABLE3To Replace HEADLIG.HT Bulb To Adjust Throttle Control CableTo Remove Hood and Grill Assembly Interlocks and RelaysFinal Setting Toadjust CarburetorPreliminary Setting Acceleration TestFuel System TractorOther Engine OILTroubleshooting Chart Problem Correction Troubleshooting ProblemChart Cause Dirty engine air screen/fins Dirty/cloggedmufflerTroubleshooting Chart Problemcause SlowPage Page Schematic Tractor - Model NumberTractor -- Model Number Electrical Electrical DescriptionTractor - Model Number Chassis and Enclosures Tractor - Model Number 917.270512 Chassis and Enclosures Tractor -- Model Number Ground Drive Tractor - Model Number Ground Drive KEY Part DescriptionSteering Assembly Tractor - Model Number Steering Assembly RingKlip#T5304-75Tractor --MODEL Number EngineOptional Equipment Tractor - Model Number Tractor - Model Number Seat Assembly Decals Wheels & TiresTractor - Model Number Lift Assembly Shaft Asm Lift Tractor - Model Number Mower Deck #10-24 Grade 35A Part Description 23O 13z1 /lO4 Gasket SET 615 Label KITCap Washer,SpringSeal Assembly,Valve Page Iii Sears

917.270512 specifications

The Craftsman 917.270512 is a robust and versatile lawn tractor that combines power, performance, and precision to help homeowners maintain their yards efficiently. This model, part of Craftsman’s renowned line of outdoor power equipment, is designed for a variety of lawn care tasks, from mowing to hauling, making it an ideal choice for those with medium to large lawns.

One of the standout features of the Craftsman 917.270512 is its powerful engine. Equipped with a 22 horsepower Briggs & Stratton engine, this tractor provides reliable performance and ample power to tackle thick grass and uneven terrain. The engine is designed for easy starting and smooth operation, ensuring that users can get to work quickly without the frustration of complicated starting procedures.

The cutting deck on the Craftsman 917.270512 is another key feature. With a 42-inch deck, this lawn tractor offers a wider cutting path, allowing users to cover more ground in less time. The deck is also adjustable, giving the operator the flexibility to customize cutting heights between 1.5 and 4 inches, ensuring an even and well-manicured lawn. Additionally, the deck is designed with a washout port, making it easy to clean and maintain after use.

In terms of technology, the Craftsman 917.270512 incorporates a hydrostatic transmission that provides smoother acceleration and ease of operation. This type of transmission allows the operator to change speeds seamlessly without the need for manual shifting, making it simpler to navigate various terrains effortlessly. This feature is particularly beneficial for maneuvering around obstacles and tight spaces in the yard.

Comfort is a key consideration in the design of the Craftsman 917.270512. It features an ergonomic seat with ample cushioning, ensuring that the operator remains comfortable even during extended mowing sessions. The tractor's compact size also allows for easy navigation in smaller spaces, while the responsive steering enhances maneuverability.

Furthermore, the Craftsman 917.270512 is equipped with a robust set of safety features, including a safety switch that ensures the engine stops when the operator leaves the seat. This feature significantly reduces the risk of accidents, making it a safe choice for users of all ages.

In summary, the Craftsman 917.270512 lawn tractor is a powerful and versatile equipment option for homeowners seeking an efficient lawn care solution. Its reliable engine, adjustable cutting deck, hydrostatic transmission, and user-friendly design make it an excellent investment for maintaining your lawn. With the right combination of performance, comfort, and safety, the Craftsman 917.270512 is sure to be a valuable addition to your outdoor toolkit.
Top Page Image Contents