Craftsman 917.27075 Towing Carts and Other Attachments, Before Starting the Engine, ADD Gasoline

Page 14

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

•Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

•The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

•Check engine oil with tractor on level ground.

•Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until "FULL" mark on dipstick is reached. Do not overfill.

•For cold weather operation you should

change oil for easier starting (See "OIL VISCOSITY CHART" in the Mainten-

ance section of this manual).

•To change engine oil, see the Mainten- ance section in this manual.

ADD GASOLINE

•Fill fuel tank. Use fresh, clean, regular unleaded gasoline with a minimum of

87 octane. (Use of leaded gasoline will increase carbon and lead oxide

deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

IMPORTANT: When operating in tem- peratures below 32°F(0°C), use fresh, clean winter grade gasoline to help insure good cold weather starting.

_WARNING: Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. _I, CAUTION: Fill to bottom of gas tank filler neck. Do not overfill. Wipe off any

spilled oil or fuel. Do not store, spill or use

gasoline near an open flame.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents RHFTSMRNo Warranty Limited 90 DAY Warranty on BatterySlope Operation General OperationBe sure the area is clear of other people Do notService Grass can hide obstaclesAPI-SF/SG/SH System Battery AMP/HR MIN. CCAFety is Involved BelowKeys Video Cassette Slope Sheet Steering WheelSeat Before Removing Tractor from Skid HOW to SET UP Your TractorTo Remove Tractor from Carton To Drive Tractor OFF Skid Install Mulcher PlateInstall Seat Check Deck Levelness To Convert to Bagging or DischargingCheck Tire Pressure Check for Proper Position of ALL BeltsBattery Reverse Forward Fast Slow Know Your Tractor HOW to USE Your Tractor To Operate Mower To Adjust Mower Cutting HeightTo Adjust Gauge Wheels LowADD Gasoline Towing Carts and Other AttachmentsBefore Starting the Engine To TransportCold Weather Starting 50 F and below To Start EngineWarm Weather Starting 50 F and Above Mowing Tips Mulching Mowing TipsBefore Each USE Lubrication ChartGeneral Recommendations Battery TractorClean AIR INTAKF-JCOOLING Areas EngineMuffler Engine OIL FilterAIR Filter Spark PlugsTractor CleaningTo Install Mower To Remove MowerBottomEdge SIDE-TO-SIDE AdjustmentFRONT-TO-BACK Adjustment Nut FTransaxle Gear Shift Lever Adjustment Belt InstallationTo Adjust Brake To Replace Motion Drive BeltTo Remove Wheel for Repairs To Start Engine with a Weak BatteryTo Adjust Steering Wheel Alignment To Attach Jumper CablesTo Replace Headlight Bulb To Remove Hood and Grill AssemblyReplacing Batiery Interlocks and RelaysTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control EngineEngine OIL OtherFuel System CylindersTroubleshooting Chart Problem Cause CorrectionExcessive vibration Wom, bent or loose blade Check all wiring Check/replace solenoid or starterEngine clicks but Loose or damaged Check oil level/change oilTroubleshooting Problem Chart CauseTractor - Model Number Schematic Tractor --MODEL Number ElectricalTractor - Model Number Electrical KEY Part DescriptionTractor - Model Number 917.270750 Chassis and Enclosures Tractor - Model Number 917.270750 Chassis and Enclosures Tractor - Model Number Ground Drive X .1845/1865 Tractor - Model Number 917.270750 Steering Assembly Tractor - Model Number Steering Assembly KEY Part NO. noTractor - Model Number Engine124028X Tractor - Model Number Seat Assembly 71110616Tractor - Model Number Decals Wheels TiresTractor - Model Number Lift Assembly Ring #5133-62 Tractor - Model Number Mower Deck STD533710 O71B 778345 1o3526o 211 2093 SO 2o Sealing Washer 694000 Page Page Page Page Suggested Guide for Sighting Slopes for Safe Operation Direction on slopesMY-HOMEsMAnytime, day or night 174323

917.27075 specifications

The Craftsman 917.27075 is a versatile and reliable lawn tractor, designed specifically for homeowners seeking a dependable solution for lawn care. This model exemplifies the blend of power and precision that has made Craftsman a leading name in outdoor equipment.

One of the standout features of the Craftsman 917.27075 is its robust 24 HP Kohler engine, providing ample power to tackle a variety of tasks, from mowing to towing. The engine is designed for efficient performance, ensuring a smooth operation, while the hydrostatic transmission allows for seamless acceleration and deceleration. This feature enhances maneuverability, making it easier to navigate tight corners and tricky landscapes.

The mowing deck on the Craftsman 917.27075 measures 46 inches, which offers a wide cutting path to cover more ground in less time. The deck is adjustable, allowing users to choose from different cutting heights, which is essential for achieving the perfect lawn finish. With its mulching capability, this tractor can easily return nutrients to the soil, promoting healthier grass growth.

Comfort is another critical aspect of the 917.27075 design. The lawn tractor comes equipped with an ergonomic seat, padded for support during extended mowing sessions. The steering wheel is positioned for ease of use, making control intuitive. Additionally, the tractor features easy-to-reach controls, further enhancing user comfort and operational efficiency.

One of the advanced technologies integrated into this model is the Smart Engage blade system, which provides a reliable blade engagement and can be activated with minimal effort. This system contributes to a more pleasant mowing experience, especially for those who may struggle with more traditional engagement mechanisms.

The Craftsman 917.27075 also includes a rugged chassis, built to withstand the rigors of regular use. The front and rear tires are designed for excellent traction, ensuring stability on uneven terrain. Its durable body construction means it can handle everyday wear and tear, making it a long-term investment for homeowners.

In summary, the Craftsman 917.27075 lawn tractor combines power, comfort, and technology, making it an ideal choice for efficient lawn care. Its strong engine, intuitive features, and robust build provide a reliable solution for maintaining a beautiful lawn with minimal effort. Whether you are mowing, bagging, or mulching, this lawn tractor reaffirms Craftsman's legacy of quality and performance in outdoor power equipment.
Top Page Image Contents