Craftsman 917.27075 owner manual Lubrication Chart, General Recommendations, Before Each USE

AsYouMAINTENANCECO PL rE SCHEDULE f_..._'_'_ _/_'=_/_'_s/'__.'_ _. __D

Check ]]re Pressure

Check Operator Presence and

T	Interlock Systems				I_
R	CheckforLooseFastenem				I_	1_7	I_
T	Lub_.,a.onChart						I/
0	Check Batten/Level					!4
A	Sharpen/Replace Mower Blades
R Clean		Battery	and Tenninels
	Check	Tratmaxle Cooling				J_
	Adjust	Blade	Belt(s)	Tension		_s
	Adjust	Motion	Drive	Belt(s) Tension		ll_s
	Check Engine Oil Level				V'	v'
	Change Engine Oil					t/,
E	ae=, Air Fitter
N	CleanAirScreen					v',
	Inspect	MutttedSpark		Arrester		t/

Replace Oil Filter (If equipped)

NClean EngineCooling Rns

Replace Spa_ Plug		v',
Replace	Air Filter Paper Cartridge
Replace	Fuel Filter

1	- Change	more ofleq when oper allng unde_ •		him W _ld or in high ambient temperi¢ure=.	5	- If equipped	with •djultabie rtttem,
2	- Sin"Acemoreopenwhen 0pen=ringin dkl"/ordustycondit;on=,				iS- Not r_ulr_		if equippedwithm•inte_incl4me battery.
3	* If equipped wllh oil filter, _		oil ivep/50	houri.	7	- Tighten front	IJde pl_ boit to 35 It,4b=, maximum.
4	- R_olac•	biades mo_e alten when	mow_g In landy :og,			Do not oveftlgNen.

GENERAL RECOMMENDATIONS

The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive

full value from the warranty, operator must maintain tractor as instructed in this manual.

Some adjustments will need to be made

periodically to properly maintain your tractor.

All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year you should replace the

spark plug, clean or replace air filter, and check blades and belts for wear. A

new spark plug and clean air filter assure proper air-fuel mixture and help

your engine run better and last longer.

BEFORE EACH USE

•Check engine oil level.

•Check brake operation.

•Check tire pressure.

•Check operator presence and interlock systems for proper operation.

•Check for loose fasteners.

LUBRICATION		CHART
(_)		-	Spindle(_)
Zerk	=_		Zerk
	I
• ) Front			_)
			Wheel
Beadng		-_	Bearing
Zerk			Zerk
_) Engine
I_	i		I
I	I		I
I	I	I	I
L__.'		'._.J	Gearshift
			Pivots

(D SAE 30 or 10w30 motor oil

(I) General Purpose Grease

_) Refer to Maintenance =ENGINE _

Section

IMPORTANT: Do not oil or grease the pivo

points which have special nylon bearings. Viscous lubricants will attract dust and dirt

that will shorten the life of the self-lubricat- ing bearings. If you feel they must be lubricated, use only a dry, powdered graphite type lubricant sparingly.

17