Craftsman C944.511590, 0944.511590 manual Blade Replacement, Gearbox

Page 10

BLADE REPLACEMENT

_WARNING:

The blade will contin-

ue to spin after the engine stops or af- ter the throttle trigger has been re- leased. To avoid serious injury, make sure the blade has stopped coasting and disconnect the spark plug before performing work on the blade.

WARNING: Wear protective

gloves when handling or performing maintenance on the blade to avoid

injury. The blade is sharp and can cut you even when it is not moving.

GEARBOX

,/ ocking Lever

1.To remove the blade, push in lock- ing lever and hold.

2.Rotate blade nut until the locking lever falls into one of the grooves in the dust cup.

3.Continue to hold in locking lever. This will keep the shaft from turn- ing while loosening the blade nut.

4.Loosen blade nut by turning clock- wise as you are facing the nut.

5.Remove the blade nut, both wash-

ers, and the blade from the blade shaft. Leave the dustcup on the gearbox.

6.Install new blade and retaining washer onto the threaded shaft ex-

tending from the gearbox (blade must be between the dust cup and the retaining washer). Make sure the raised part of the retaining

washer is facing the gearbox, and the raised area fits into the hole in the center of the blade.

Gearbox

Shield

\

Dust Cu

Threaded Shaft

Blade

Retaining

Washer

Cupped__.

Washer

_-q-_ Nut

7.Place the cupped washer onto the shaft. Make sure the cupped side of the washer is toward the blade.

8.Install blade nut by threading onto the shaft counterclockwise as you are facing the nut.

NOTE: Make sure all parts are in place as illustrated, and the blade is sand-

wiched between the dust cup and the retaining washer. There should be no space between the blade and the dust cup or the retaining washer.

9.Push in locking lever and hold.

10.Rotate blade nut until the locking lever falls into one of the grooves in the dust cup.

11.Continue to hold in locking lever. This will keep the shaft from turning while tightening the blade nut.

12.Tighten blade nut firmly with a wrench.

13.Release locking lever.

14.Turn blade by hand. If the blade binds against the shield, or ap-

pears to be uneven, the blade is not centered, and you must rein- stall.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Brushcutier Attachment Commercial or Rentaluse Operator Safety UNIT/MAINTENANCE SafetyCutting Safety Fuel SafetyTransporting and Storage Cartoncontents Checkcartoncontentsagainstthefol* lowinglist Shoulderstrapassembly Lower Shoulder Strap ClampRemoving Attachment Know Your Brushcutter AttachmentBlade Locking LeverOperating Position When Blade Thrust OccursOperating Instructions for Brushcutter Attachment Maintenance Schedule Care and Maintenance TaskBlade Replacement GearboxSeasonal Storage

0944.511590, 944.511590, C944.511590 specifications

The Craftsman C944.511590 is a remarkable addition to the Craftsman lineup, continuing the brand's legacy of providing high-quality, durable tools for both professional and amateur users. This particular model exemplifies innovation, performance, and versatility, making it a popular choice for various projects.

One of the standout features of the C944.511590 is its powerful motor. Designed to deliver an exceptional performance, the motor generates significant torque and speed, enabling users to tackle demanding tasks with ease. Whether you’re drilling into tough materials or fastening screws, the power and efficiency of this tool are evident.

Equipped with advanced technology, the C944.511590 boasts a brushless motor that not only extends the tool's lifespan but also enhances its overall performance. Brushless motors reduce friction and heat buildup, ensuring that the tool runs cooler and more efficiently. This translates into longer run times, allowing users to complete their projects without frequent interruptions for recharging.

Another notable characteristic of the Craftsman C944.511590 is its lightweight design. Weighing significantly less than many competing models, this tool is easy to handle and maneuver, reducing fatigue during extended use. This ergonomic design is complemented by a comfortable grip, ensuring that users can maintain control and precision in their work.

The C944.511590 also features an adjustable speed setting, providing users with the flexibility to tackle a variety of tasks, from delicate applications to heavy-duty work. This adaptability makes it an invaluable tool for hobbyists and professionals alike. The inclusion of an LED work light is another practical feature, illuminating dark work areas and ensuring accuracy even in low-light conditions.

Durability is a hallmark of Craftsman tools, and the C944.511590 is no exception. Built with robust materials, this tool is designed to withstand the rigors of daily use, making it suitable for both home improvement projects and industry applications.

In summary, the Craftsman C944.511590 combines power, efficiency, and durability with thoughtful design elements. Whether you are a seasoned professional or a DIY enthusiast, this tool equips you with everything you need to achieve exceptional results in your projects. With its advanced features and user-friendly design, the C944.511590 is a reliable choice for anyone looking to enhance their toolkit.
Top Page Image Contents