Maintenance Schedule

•Donotraisetheengineaboveyour waistasthebladecancomedanger- ouslyclosetoyourbody.

•Donotswingtheunitwithsuchforce thatyouareindangeroflosingyour balance.

Bringthepowerheadenginetocutting speedbeforeenteringthematerialto becut.

Ifthebladedoesnotturnwhenyou squeezethethrottletriggerofthepow- erhead,makesuretheattachment is

fully inserted into the coupler.

Always release the throttle trigger and allow powerhead engine to return to idle speed when not cutting. The blade should not turn while the engine is run- ning at idle. If the blade turns at idle, do not use your unit. Refer to the CAR- BURETOR ADJUSTMENT section of the

powerhead manual or contact your Sears Service Centre.

•Maintain good firm footing while us- ing the unit. Do this by planting feet firmly in a comfortable apart position.

•Cut while swinging the upper part of

•your body from right to left.

As you move forward to the next area to cut, be sure to maintain your balance, and footing.

RECOMMENDED CUTTING POSITION

10 o'clock _,_

Cut using the 8 o'clock '_ ]1_}) to 10 o'clock position of -y "11

the blade

8 o'clock%'_ _'_

WARNING: The operator or others must not try to clear away cut material with the engine running or the blade turning to avoid serious injury. Stop en- gine and blade before removing materi- als wrapped around blade or tube.

_WARNING:	Always stop unit and disconnect spark plug wire before
performing	maintenance.

CARE AND MAINTENANCE TASK

Check for loose fasteners and parts

Check for damaged or worn parts

Inspect and clean unit and decals

Check or replace blade

_ENERAL RECOMMENDATIONS

The warranty on this attachment does not cover items that have been sub-

jected to operator abuse or negli- gence. To receive full value from the

warranty, the operator must maintain the brushcutter attachment as instruct-

ed in this manual.

CHECK FOR LOOSE FASTENERS AND PARTS

•Blade nut

•Fasteners

CHECK FOR DAMAGED OR WORN PARTS

Contact Sears Service Centre for re- placement of damaged or worn parts.

•Blade Shield - Discontinue use of brushcutter attachment if shield is

damaged.

INSPECT AND CLEAN UNIT

AND DECALS

•After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild detergent.

WHEN TO PERFORM

Before each use

After each use

Every 5 hours of operation

•Wipe off unit with a clean dry cloth.

BLADE MAINTENANCE

_WARNING:

The blade will contin-

ue to spin after the engine stops or af- ter the throttle trigger has been re- leased. To avoid serious injury, make sure the blade has stopped coasting and disconnect the spark plug before performing work on the blade.

WARNING: Always replace a blade that is bent, warped, cracked, broken, or damaged in any other way. Never attempt to straighten and reuse a damaged blade. Use only specified replacement blade. Wear protective gloves when handling or performing maintenance on the blade to help avoid injury.

•Check blade for flatness periodically, Lay the blade on a flat surface to in- spect for flatness, Throw away a blade that is not flat,

0944.511590, 944.511590, C944.511590 specifications

The Craftsman C944.511590 is a remarkable addition to the Craftsman lineup, continuing the brand's legacy of providing high-quality, durable tools for both professional and amateur users. This particular model exemplifies innovation, performance, and versatility, making it a popular choice for various projects.

One of the standout features of the C944.511590 is its powerful motor. Designed to deliver an exceptional performance, the motor generates significant torque and speed, enabling users to tackle demanding tasks with ease. Whether you’re drilling into tough materials or fastening screws, the power and efficiency of this tool are evident.

Equipped with advanced technology, the C944.511590 boasts a brushless motor that not only extends the tool's lifespan but also enhances its overall performance. Brushless motors reduce friction and heat buildup, ensuring that the tool runs cooler and more efficiently. This translates into longer run times, allowing users to complete their projects without frequent interruptions for recharging.

Another notable characteristic of the Craftsman C944.511590 is its lightweight design. Weighing significantly less than many competing models, this tool is easy to handle and maneuver, reducing fatigue during extended use. This ergonomic design is complemented by a comfortable grip, ensuring that users can maintain control and precision in their work.

The C944.511590 also features an adjustable speed setting, providing users with the flexibility to tackle a variety of tasks, from delicate applications to heavy-duty work. This adaptability makes it an invaluable tool for hobbyists and professionals alike. The inclusion of an LED work light is another practical feature, illuminating dark work areas and ensuring accuracy even in low-light conditions.

Durability is a hallmark of Craftsman tools, and the C944.511590 is no exception. Built with robust materials, this tool is designed to withstand the rigors of daily use, making it suitable for both home improvement projects and industry applications.

In summary, the Craftsman C944.511590 combines power, efficiency, and durability with thoughtful design elements. Whether you are a seasoned professional or a DIY enthusiast, this tool equips you with everything you need to achieve exceptional results in your projects. With its advanced features and user-friendly design, the C944.511590 is a reliable choice for anyone looking to enhance their toolkit.