To Adjust Gauge Wheels, To Operate Mower

•The average lawn should be cut to approximately 2-1/2 inches during the

cool season and to over 3 inches during hot months. For healthier and better

looking lawns, mow often and after moderate growth.

•For best cutting performance, grass

over 6 inches in height should be mowed twice. Make the first cut rela-

tively high; the second to desired height.

TO ADJUST GAUGE WHEELS

Gauge wheels are properly adjusted

when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help

prevent scalping in most terrain condi- tions.

•Adjust gauge wheels with tractor on a flat level surface.

•Adjust mower to desired cutting height.

•Lower mower with lift control. Remove rear retainer spring and clevis pin which secure each gauge wheel.

•Lower gauge wheels to ground. Raise gauge wheels slightly to align holes in bracket and gauge wheel bar and insert clevis pins. Gauge wheels should be slightly off the ground.

•Replace retainer springs into clevis pins.

Retrainer Clevis Pin

sp0og\ Jj--

auge

Wheels _

Fe_=_'_7///'lT_ _.

Bar s_

Gaug

Wheel

Bracket

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

•Select desired height of cut.

•Lower mower with attachment lift con- troL

•Start mower blades by engaging attach- ment clutch control.

•TO STOP MOWER BLADES - disen- gage attachment clutch control.

_.CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the discharge guard in place.

Attachment Clutch Attachment Lift Lever Switch Pull Out To High Position Low

"Engage".#"Position

Push In To "Disengage"

TO OPERATE ON HILLS

,_CAUTION: Do not drive up or down hills with slopes greater than 15 ° and do

not drive across any slope. Use the slope guide provided at the back of this manual.

•Choose the slowest speed before start- ing up or clown hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

clutch/brake pedal quickly to brake posi-

i tionf stoppingisand engageabsolutelyparking necessary,brake. push

Move motion control lever to neutral (N) position.

IMPORTANT: The motion control lever does not retum to neutral (N) position when the clutch/brake pedal is depressed.

iparkingTo restartbrakemovement,and clutch/brakeslowly releasepedal. Slowly move motion control lever to slowest setting.

•Make all tums slowly.

TO TRANSPORT

When pushing or towing your tractor, be

sure to disengage transmission by placing freewheel control in freewheeling posi- tion. Freewheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest positi0n with attachment lift control.

•Remove retainer spring from freewheel control rod.

•Push control red in to disengage trans-

mission and reinsert retainer spdng into control rod hole now on back side of the bracket.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse abeve procedure.

917.27306 specifications

The Craftsman 917.27306 is a standout lawn mower known for its reliability, performance, and advanced features. This gas-powered, walk-behind mower is designed for homeowners who demand quality and efficiency in their lawn care routine.

One of the main features of the Craftsman 917.27306 is its powerful 163cc engine. This reliable engine provides adequate cutting power for various grass types, ensuring a clean and even cut. The mower's performance is bolstered by a self-propelling mechanism that makes it easier to maneuver across different terrains, particularly on slopes and uneven surfaces. This feature significantly reduces user fatigue, allowing for a more enjoyable mowing experience.

The Craftsman 917.27306 is equipped with a 21-inch cutting deck, which strikes a balance between maneuverability and cutting width. This size makes it suitable for medium to large yards, enabling homeowners to cover ground quickly while still being able to navigate tight spaces with ease. Additionally, the cutting deck has a height adjustment feature, allowing users to customize their mowing height. This takes into account different grass types and desired lawn aesthetics.

The mower also incorporates advanced mulching technology, which finely chops grass clippings and returns them to the lawn as a natural fertilizer. This not only nourishes the grass but also eliminates the need for bagging clippings, promoting a healthier lawn ecosystem. Furthermore, the Craftsman 917.27306 includes a rear bagging option for those who prefer a clean-cut lawn or want to collect clippings for disposal.

Another notable characteristic is the ergonomic handle design, which is adjustable to suit different user heights. This thoughtful feature ensures comfort during operation, reducing strain and making the mowing process less labor-intensive.

Safety is a priority with the Craftsman 917.27306, as it is designed with a blade brake system that halts the blades when the user releases the handle. This provides peace of mind, especially for families with children or pets.

In summary, the Craftsman 917.27306 is a reliable and feature-rich lawn mower that caters to the needs of homeowners. Its powerful engine, self-propelling design, adjustable cutting height, and efficient mulching system make it an ideal choice for maintaining a beautiful lawn with minimal effort. With its combination of performance, technology, and user-friendly features, the Craftsman 917.27306 stands out as an excellent investment for lawn care enthusiasts.