Craftsman 917.27306 owner manual Tractor, Fuel System, Engine OIL, Cylinders

Page 31

Immediately prepare your tractor for stor- age at the end of the season or if the trac-

tor will not be used for 30 days or more.

_,CAUTION: Never store the tractor with

gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before stor- ing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. This will allow you to clean it thor- oughly. Remove all did, grease, leaves, etc. Store in a clean, dry area.

•Clean entire tractor (See =CLEANING" in the Maintenance section of this man-

ual).

•Inspect and replace belts, if necessary (See belt replacement instructions in the

Service and Adjustments section of this manual).

•Lubricate as shown in the Maintenance section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving

parts for damage, breakage and wear.

Replace if necessary.

•Touch up all rusted or chipped paint sur- faces; sand lightly before painting.

BATTERY

•Fully charge the battery for storage.

•After a period of time in storage, battery may require recharging.

•To help prevent corrosion and power leakage dudng long pedods of storage, battery cables should be disconnected and battery cleaned thoroughly (see

"TO CLEAN BA'I-I'ERYAND TERMI- NALS" in the Maintenance section of this _nanual).

•After cleaning, leave cables disconnect- ed and place cables where they cannot come in contact with battery terminals.

•If battery is removed from tractor for

storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose, or tank dudng storage.

Also, experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can dam- age the fuel system of an engine while in storage.

•Drain the fuel tank.

•Start the engine and let it run untilthe fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable altemative in minimizing the formation of fuel gum deposits dudng storage. Add sta- bilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine

at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carbure-

tor. Do not drain the gas tank and carbure- tor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See =ENGINE" in the Maintenance section of this manual).

CYLINDER(S)

•Remove spark plug(s).

•Pour one ounce of oil through spark plug hole(s) into cylinder(s).

•Tum ignition key to "START" position for a few seconds to distribute oil

•Replace with new spark plug(s).

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if it starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your tractor indoors and cover it to give protection from dust and dirL

•Cover your tractor with a suitable protec- tive cover that does not retain moisture.

Do not use plastic. Plastic cannot breathe, which allows condensation to

form and cause your tractor to rust.

IMPORTANT: Never cover tractor while

engine and exhaust areas are still warm.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents CRnFTSMnNo Craftsman Riding Equipment Limited 90 DAY Warranty on BatteryGeneral Operation Children ServiceSlope Operation Do notGrass can hide obstacles TY is InvolvedMaintenance Agreement Product SpecificationsParts BAG Contents Shown Full Size Cassette Steering Wheel Wheel Insert Sleeve Unpack Carton Before Rolling Tractor OFF Skid Attach Steering WheelCheck Tire Pressure HOW to SET UP Your Tractor Check BatteryInstall Mower and Drive Belt Install SeatCheck Mower Levelness Ii Checklist R N H L Tractor Know Your TractorEngine To SET Parking BrakeStopping Mower Blades Ground DriveTo Transport To Adjust Gauge WheelsTo Operate Mower To Operate on HillsBefore Starting the Engine Check Engine OIL Level Towing Carts and Other AttachmentsBelow Automatic Transmission WARM-UPPurge Transmission AboveMowing Tips Repl=,o,Fi,.,.qui Battery Transaxle Pump Fluid Clean AIR ScreenBelts Transaxle CoolingSpark Plugs To Service PRE-CLEANERTo Service Cartridge AIR FilterTractor To Remove Mower To Install MowerTo Replace Mower Drive Belt SIDE-TO-SIDE AdjustmentTo Level Mower Housing Mower Drive Belt RemovalTo Replace Mower Blade Drive Belt Mower Drive Belt InstallationBelt Removal To Adjust Attachment ClutchTo Adjust Brake To Replace Motion Drive BeltTo Adjust TOE-IN To Adjust Motion Control LeverTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN AdjustmentTo Attach Jumper Cables To Start Engine with a Weak BatteryFront Wheel Rear WheelTo Remove Hood and Grill AssemblyTo Replace Fuse Acceleration Test To Adjust Choke ControlTo Adjust Carburetor Final SettingCylinders TractorFuel System Engine OILChart TROUBLI=SHOOTING ProblemCorrection Cause ProblemOFF Troubleshooting ChartTractor . . Model Number SchematicTractor - Model Number Electrical Electrical KEY Part Description Tractor - Model NumberTractor - Model Number Chassis and Enclosures Bracket, SupportAxle/Engine Tractor - Model Number Ground Drive KEY Part Description Tractor - Model Number Steering Assembly KEY Part NO. no Spark Arrester KIT KEY Part NO. NO.DESCRIPTION EngineSpng,Cprm Tractor Model Number Seat AssemblyDecals KEY Part Description Wheels & TiresTractor - Model Number Lift Assembly Washer 29i32xl-1/4x16Ga Tractor - Model Number Mower Deck MandrAssemUyrudes Tractor - Model Number Transaxle Model no -3010L SAE Page BU-10L-122 Tractor - Model Number Transaxle Pump Model NumberCylinder HEAD, Valve and Breather Ckmp,hoea2 Is\ AIR INTAKE/FILTRATION System Engine Controls Cap Crankshaft ENGINE-MODEL Number CV20S, Type Number Tractor - Model Number KohlerSighting Guide Only Ride UP and Down HILL, not Across Hill Suggested Guide for Sighting Slopes for Safe OperationPage Page Page Sears

917.27306 specifications

The Craftsman 917.27306 is a standout lawn mower known for its reliability, performance, and advanced features. This gas-powered, walk-behind mower is designed for homeowners who demand quality and efficiency in their lawn care routine.

One of the main features of the Craftsman 917.27306 is its powerful 163cc engine. This reliable engine provides adequate cutting power for various grass types, ensuring a clean and even cut. The mower's performance is bolstered by a self-propelling mechanism that makes it easier to maneuver across different terrains, particularly on slopes and uneven surfaces. This feature significantly reduces user fatigue, allowing for a more enjoyable mowing experience.

The Craftsman 917.27306 is equipped with a 21-inch cutting deck, which strikes a balance between maneuverability and cutting width. This size makes it suitable for medium to large yards, enabling homeowners to cover ground quickly while still being able to navigate tight spaces with ease. Additionally, the cutting deck has a height adjustment feature, allowing users to customize their mowing height. This takes into account different grass types and desired lawn aesthetics.

The mower also incorporates advanced mulching technology, which finely chops grass clippings and returns them to the lawn as a natural fertilizer. This not only nourishes the grass but also eliminates the need for bagging clippings, promoting a healthier lawn ecosystem. Furthermore, the Craftsman 917.27306 includes a rear bagging option for those who prefer a clean-cut lawn or want to collect clippings for disposal.

Another notable characteristic is the ergonomic handle design, which is adjustable to suit different user heights. This thoughtful feature ensures comfort during operation, reducing strain and making the mowing process less labor-intensive.

Safety is a priority with the Craftsman 917.27306, as it is designed with a blade brake system that halts the blades when the user releases the handle. This provides peace of mind, especially for families with children or pets.

In summary, the Craftsman 917.27306 is a reliable and feature-rich lawn mower that caters to the needs of homeowners. Its powerful engine, self-propelling design, adjustable cutting height, and efficient mulching system make it an ideal choice for maintaining a beautiful lawn with minimal effort. With its combination of performance, technology, and user-friendly features, the Craftsman 917.27306 stands out as an excellent investment for lawn care enthusiasts.
Top Page Image Contents