Craftsman 917.275764 Tools Required for Assembly, To Remove Tractor from Carton Unpack Carton

Page 8

Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes you need

are

listed

below.

 

 

(1)

3/4"

wrench

(1)

Pliers

(1)

1/2"

wrench

(1)

Utility knife

(1)

Tire

pressure

gauge

 

When right or left hand is mentioned in this manual, it means, from your point of view, when you are in the operating posi- tion (seated behind the steering wheel).

TO REMOVE TRACTOR FROM

CARTON

UNPACK CARTON

1.Remove all accessible loose parts and parts boxes from carton.

2.Cut along dotted lines on all four pan- els of carton. Remove end panels and lay side panels flat.

3.Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL

ASSEMBLE EXTENSION SHAFT AND BOOT

1.Slide extension shaft onto lower steer- ing shaft.

2.Place tabs of steering boot over tab slots in dash and push down to secure.

INSTALL STEERING WHEEL

3.Position front wheels of the tractor so they are pointing straight forward.

4.Remove steering wheel adapter from steering wheel and slide adapter onto steering shaft extension.

5.Position steering wheel so cross bars are horizontal (left to right) and slide inside boot and onto adapter.

6.Assemble large flat washer, 5/16 lock washer, 5/16 hex bolt and tighten securely.

7.Snap steering wheel insert into center of steering wheel.

8.Remove protective materials from trac- tor hood and grill.

IMPORTANT: Check for and remove any

staples in skid that may puncture tires where tractor is to roll off skid.

INSTALL SEAT

1.Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

2.Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

3.Place seat on seat pan so head of shoulder bolts are positioned over the large slotted holes in pan.

4.Push down on seat to engage shoulder

bolts in slots and pull seat towards rear of tractor.

5.Pivot seat and pan forward and as- semble adjustment bolt, Iockwasher and flat washer loosely. Do not tighten.

,Lower seat into operating position and

8 sit in seat.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Jcrrftsmrnj Days on Battery Year on TractorGeneral Operation Service III. ChildrenIV. Towing Safe Handling of GasolineGeneral Service Product AgreementsKeys Tools Required for Assembly Assemble Extension Shaft and BootInstall Steering Wheel Install SeatCheck Battery To Roll Tractor OFF Skid See Operation section for locationCheck Brake System Check Deck LevelnessCheck for Proper Position of ALL Belts Property damage Know Your Tractor Attachment Clutch Lever UsedTo SET Parking Brake StoppingTo Adjust Gauge Wheels Using the Reverse Operation SystemOperating in Reverse To Operate MowerTo Operate Hills To TransportTowing Carts and Other Attach Ments Before Starting the Engine Check Engine OIL LevelAutomatic Transmission Warm UP Purge TransmissionMowing Tips MA,.TE.A.SCCE.EOULE General RecommendationsCheck Operator Presence System Check Reverse Operation ROS SystemBlade Care Blade RemovalEngine Lubrication Clean AIR Screen Engine OIL FilterAIR Filter Engine Cooling SystemCleaning MufflerSpark Plugs IN-LINE Fuel FilterTo Install Mower To Remove MowerTo Level Mower Housing To Replace Mower Blade Drive BeltTo Check and Adjust Brake To Adjust BrakeTo Check Brake To Replace Motion Drive BeltTransaxle Motion Control LE VER Neutral Adjustment Transmission Removal ReplacementMent To Start Engine with a Weak BAT TeryTo Remove Hood and Grill AS- Sembly Replacing BatteryTo Replace Headlight Bulb To Adjust Throttle Control Cable To Adjust CarburetorPreliminary Setting EngineBattery TractorEngine OIL CylindersProblem Cause CorrectionChoked Start EngineProblem Cause ContProblem Cause Correction OFFOlllll,o Electrical KEY Part Description Tractor - Model Number Chassis and Enclosures Tractor - Model Number Chassis and Enclosures Tractor - Model Number Ground Drive Tractor - Model Number Ground Drive 45% Tractor - Model Number Steering Assembly Optional Equipment KEY PartTractor - Model Number Seat Assembly Description Wheels & TiresTractor - Model Number Lift Assembly Tractor - Model Number Mower Deck Includes 206 KEY Part Description 434 1006 601 690946 Plug-Oil Drain 141 495931 Kit-Choke Strap-Starter Page Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down HILL, not Across Hill Degrees MAXSearsBrands,LLC

917.275764 specifications

The Craftsman 917.275764 is a powerful and efficient lawn tractor that exemplifies the blend of functionality, durability, and innovation, making it an ideal choice for homeowners who seek a reliable gardening tool. This model, part of Craftsman's renowned lineup, is specifically designed for cutting grass, maintaining larger lawns, and performing various yard tasks with ease.

One of the standout features of the Craftsman 917.275764 is its robust 24 HP Kohler engine. This engine delivers impressive power, ensuring that even the toughest grass and terrain can be tackled without difficulty. Its reliable performance allows users to complete lawn care activities more efficiently, making the tractor a valuable investment for maintaining a pristine yard.

Equipped with a 54-inch cutting deck, the Craftsman 917.275764 allows for a wide mowing path, enhancing productivity by reducing the number of passes needed to cover the lawn. The cutting height can be easily adjusted, offering multiple positions to suit different grass types and user preferences, thus guaranteeing an even cut. This flexibility enables users to tailor their mowing experience for optimal results.

The tractor features a hydrostatic transmission, providing a smooth driving experience without the need for manual gear shifting. This system not only simplifies operation but also allows for seamless speed adjustments while mowing, giving operators precise control over their mowing speed. The ergonomic design of the controls further enhances usability, making it easy for users of all skill levels to operate the tractor comfortably.

Adding to its practicality, the Craftsman 917.275764 includes a tight turning radius, allowing for greater maneuverability in gardens and around obstacles, making it an outstanding choice for yards with various features. Additionally, the tractor is compatible with various attachments, such as baggers and snow blowers, transforming it into a multi-functional tool for year-round use.

Safety is also a priority with the Craftsman 917.275764, featuring a seat safety switch that ensures the engine shuts off if the operator leaves the seat, reducing the risk of accidents. These features, combined with the rugged construction of the machine, reflect Craftsman's commitment to quality and safety.

In conclusion, the Craftsman 917.275764 lawn tractor stands out with its powerful engine, wide cutting deck, hydrostatic transmission, and versatile functionality. Whether for routine lawn maintenance or tackling more extensive yard work, this tractor offers homeowners an efficient and dependable solution for their gardening needs.
Top Page Image Contents