Craftsman 917.27475 manual Problem, Cause, Correction

Page 30

TROUBLESHOOTING CHART:

See appropriate section in manual unless directed to Sears service center

PROBLEM

Loss of power

Excessive vibration

Engine dies when tractor is shifted

into reverse

Engine continues to run when

operator leaves seat with attach-

ment clutch

engaged

CAUSE

1.Cutting too much grass/too fast.

2.Throttle in "CHOKE" position.

3.Build-up of grass, leaves and trash under mower.

4.Dirty air filter.

5.Low oil level/dirty oil.

6.Faulty spark plug.

7.Dirty fuel filter.

8.Stale or dirty fuel.

9.Water in fuel.

10.Spark plug wire loose.

11.Dirty engine air screen/fins.

12.Dirty/clogged muffler.

13.Loose or damaged wiring.

14.Carburetor out of adjustment.

15.Engine valves out of adjustment.

1.Worn, bent or loose blade.

2.Bent blade mandrel.

3.Loose/damaged part(s).

,Reverse operation system (ROS) is not "ON" while mower or other attachment

is engaged.

,Faulty operator-safety presence control system.

CORRECTION

1.Raise cutting height/reduce speed.

2.Adjust throttle control.

3.Clean underside of mower

housing.

4.Clean/replace air filter.

5.Check oil level/change oil.

6.Clean and regap or change spark plug.

7.Replace fuel filter.

8.Empty fuel tank and refill tank with fresh, clean gasoline.

9.Empty fuel tank and carbure- tor, refill tank with fresh gas- oline and replace fuel filter.

10.Connect and tighten spark plug wire.

11.Clean engine air screen/fins.

12.Clean/replace muffler.

13.Check all wiring.

14.See "To Adjust Carburetor" in Service and Adjustments section.

15.Contact a Sears or other qualified service center.

1.Replace blade. Tighten blade bolt.

2.Contact a Sears or other qualified service center.

3.Tighten loose part(s). Replace damaged parts.

1.Turn ignition key to ROS "ON" position. See Operation section.

,Check wiring, switches and connections. If not corrected

contact Sears or other qualified service center.

Poor cut - uneven , Worn, bent or loose blade.

2.Mower deck not level.

3.Buildup of grass, leaves, and trash under mower.

4.Bent blade mandrel.

5.Clogged mower deck vent holes from buildup of grass, leaves, and trash around mandrels.

1.Replace blade. Tighten blade bolt.

2.Level mower deck.

3.Clean underside of mower

housing.

4.Contact a Sears or other qualified service center.

5.Clean around mandrels to open vent holes.

30

Image 30
Contents Crrftsmrn Limitedwarrantyon Craftsmanridingequipment General Operation IV. Towing ServiceIII. Children Safe Handling of GasolineGeneral Service Product Boot Install Seat Assemble Extension Shaft and BootInstall Steering Wheel To Remove Tractor from CartonCheck Battery To Roll Tractor OFF Skid See Operation section for locationCheck Deck Levelness ChecklistCheck Tire Pressure Check for Proper Position of ALL BeltsAutomatic Models only Know Your Tractor ROS onHOW to USE Your Tractor To SET Parking BrakeStopping Using the Reverse Operation System To Operate MowerReverse Operation System ROS To Operate on Hills Mowing Tips Before Each USE ChartGeneral Recommendations LubricationTo Sharpen Blade Battery EngineTransaxle Cooling AIR Filter Clean AIR ScreenEngine OIL Filter Engine Cooling SystemSpark Plugs CleaningMuffler IN-LINE Fuel FilterTo Install Mower Tractor To Remove MowerTo Level Mower Housing To Replace Mower Blade Drive BeltTo Check Brake To Check and Adjust BrakeTo Adjust Brake To Replace Motion Drive BeltMent To Start Engine with a Weak BAT TeryReplacing Battery Engine Cylinders TractorEngine OIL OtherChoked Troubleshooting ChartCause 3ORRECTION Start EngineProblem CauseCorrection Problem Cause OFFPage Schematic Tractor - Model NumberElectrical KEY Part NO. NO.DESCRIPTION Tractor - Model Number Chassis and Enclosures KEY Part Description Tractor Model Number Ground Drive Tractor - Model Number Ground Drive StltTractor - Model Number Steering Assembly Tractor - Model Number Steering Assembly Optional Equipment Tractor - Model Number Lift Assembly Tractor - Model Number Seat Assembly Decals Tractor - Model Number Mower Deck Shaft 42A REF Part NO. no Description 20@ 305% O47 917.274750 Briggs ENGINE-MODEL Number 31P777, Type Number 0299-E1Tractor Model Number Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXSears

917.27475 specifications

The Craftsman 917.27475 is a lawn tractor that combines power, performance, and versatility, making it an ideal choice for homeowners looking to maintain their outdoor spaces with ease. Equipped with a robust 19 horsepower Briggs & Stratton engine, this model provides reliable starting and efficient performance, ensuring that tackling those large lawns becomes a manageable task.

One of the standout features of the Craftsman 917.27475 is its 42-inch cutting deck, which offers a wide cutting path to handle various terrains. The deck is made of high-quality steel, ensuring durability and a long lifespan. This model also boasts an adjustable cutting height, allowing users to select from various settings to achieve the desired lawn appearance, whether it be a manicured finish or a more natural look.

The tractor's six-speed manual transmission offers users complete control over their mowing speed, enabling them to adjust according to their mowing conditions. Its tight turning radius allows for enhanced maneuverability, making it easier to navigate around flower beds, trees, and other landscaping features, ensuring a clean cut every time.

Comfort is another key feature of the Craftsman 917.27475. It comes with a plush, high-back seat that provides ample support, helping to reduce fatigue during longer mowing sessions. The strategically placed steering wheel and foot pedals ensure that controls are easily accessible, contributing to an enjoyable mowing experience.

Another advantage of this lawn tractor is its versatility. The Craftsman 917.27475 can accommodate various attachments, transforming it into a multi-purpose machine. Whether it's adding a bagger for easy grass collection, a mulching kit for nutrient recycling, or a snow blade for winter use, this tractor can adapt to changing seasonal needs.

Additionally, the model features an easy-to-access fuel tank and a simple maintenance design that allows for hassle-free oil changes and adjustments. With its durable tires designed for traction on various terrains, the Craftsman 917.27475 is built to tackle all types of mowing challenges.

In summary, the Craftsman 917.27475 lawn tractor merges powerful performance with comfort and versatility, making it a valuable investment for homeowners. Its numerous features, combined with ease of use, ensure that maintaining a beautiful lawn is not just a chore but a rewarding experience.