Craftsman 917.27537 To Operate Mower, Using the Reverse Operation System, To Operate Hills

Page 14

•The average lawn should be cut to ap- proximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equip- ment on rough, rolling terrain or hills.

1.Select desired height of cut.

2.Start mower blades by engaging at- tachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

_,CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

 

Attachemnt

Lift

 

Lever High

Position

Attachment

i/,,_,

 

Clutch Lever

,_?_"'-- Low

"Enc

 

 

Position

Position

Shield

REVERSE OPERATION SYSTEM (ROS) Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direc- tion with the attachment clutch engaged will shut off the engine unless the ignition key is placed in the ROS "ON" position.

,_WARNING: Backing up with the at- tachment clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in

reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

1.Depress clutch/brake pedal all the way down and hold.

2.With engine running, turn ignition key

counterclockwise to ROS "ON" posi- tion.

3.Look down and behind before backing up.

4.Move gear shift lever to reverse (R) po- sition and slowly release clutch/brake pedal to start movement.

5.When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" Position Engine "ON" Position (Normal Operating)

TO OPERATE

ON

HILLS

_,WARNING:

Do

not drive up or down

hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide at the back of this manual.

•Choose the slowest speed before start- ing up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake posi- tion and engage parking brake.

•Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Crrftsmrn Limitedwarrantyon Craftsmanridingequipment General Operation III. Children Service Safe Handling of GasolineII. Slope Operation IV. TowingGeneral Service Product Repair Protection AgreementsSeat Before Removing Tractor Tools Required for AssemblyInstall Seat Attach Steering WheelCheck Battery DjustmentKnobNCheck for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemAttachment Keep Area Clear Slope Hazards Know Your Tractor ROSHOW to USE Your Tractor To SET Parking Brake To Operate Hills Using the Reverse Operation SystemTo Operate Mower Before Starting the Engine Check Engine OIL Level To TransportTowing Carts and Other Attach Ments ADD GasolineMowing Tips Maintenance Schedule General RecommendationsBlade Care Check Operator Presence SystemCheck Reverse Operation ROS System Blade RemovalBatt E RY Engine LubricationIN-LINE Fuel Filter MufflerSpark Plugs Tractor To Remove Mower CleaningService or Adjustments FRONT-TO-BACK Adjustment To Level Mower HousingSIDE-TO-SIDE Adjustment To Replace Mower Blade Drive Belt Front Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever NEU- Tral AdjustmentTo Adjust Steering Wheel Align Ment To Remove Wheel for RepairsInterlocks and Relays Replacing BatteryTo Replace Headlight Bulb To Replace FuseEngine Other Engine OILCylinders Choked ProblemCause Correction Start EngineProblemcause ROSMower blades will Schematic =-2Tractor - Model Number Electrical Electrical KEY Part DescriptionTractor - Model Number Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Ground Drive Tractor . . Model Number Tractor - Model Number Ground Drive Tractor - Model Number Steering Assembly KEY Part NO. NO.DESCRIPTION Optional Equipment KEY PartTractor - Model Number Seat Assembly Decals Wheels & TiresTractor - Model Number Lift Assembly Ii47142 Includes Oo% MST Tractor - Model Number Peerless Transaxle - Model NumberPart Description 20@ 6170 216 4311 3041 Tractor Model Number Briggs ENGINE-MODEL NumberBriggs ENGINE-MODEL Number 310707,TYPE Page Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXIiiiiiiiiiiiiiiiiiijiii Your Home

917.27537 specifications

The Craftsman 917.27537 is a high-performance lawn mower that offers an array of features and technologies designed to provide a superior cutting experience. This riding mower is well-suited for homeowners with medium to large-sized lawns, boasting a robust engine and efficient cutting capabilities.

At the heart of the Craftsman 917.27537 is a powerful 19 horsepower Briggs & Stratton engine. This engine has been specifically engineered for reliability and durability, ensuring that it can handle the rigors of mowing while providing consistent performance. The automatic transmission allows for smooth operation, enabling users to easily navigate their lawn without the need for constant gear shifting.

One of the standout features of the Craftsman 917.27537 is its 42-inch cutting deck. This wide cutting path is designed to efficiently cover more ground in a single pass, reducing mowing time and providing a cleaner cut. The cutting deck is crafted from high-quality materials to withstand wear and tear, ensuring longevity and durability over time. Additionally, the mower offers 6 height adjustment positions, allowing users to customize their grass cutting height to achieve the desired look of their lawn.

The mower is equipped with a built-in mulching capability, which is essential for maintaining a healthy lawn. By finely chopping the clippings and redistributing them back onto the lawn, it provides essential nutrients to the soil, promoting a lush and vibrant lawn. Furthermore, the side discharge feature helps to expel clippings efficiently, preventing clumps on the lawn.

User comfort is also a priority with the Craftsman 917.27537. The mower features an ergonomic seat and easy-to-reach controls, making it comfortable for extended mowing sessions. The inclusion of an easy-start ignition system means that users can get the mower up and running with minimal effort.

The Craftsman 917.27537 also emphasizes safety, with features like an automatic shut-off function that engages when the operator leaves the seat, ensuring peace of mind while mowing. The sturdy construction combined with modern engineering makes this model a reliable choice for home gardening enthusiasts looking for a high-quality lawn mower. Overall, the Craftsman 917.27537 is an exceptional option for anyone in search of efficiency, ease of use, and cutting technology.
Top Page Image Contents