Craftsman 917.27537 owner manual HOW to USE Your Tractor To SET Parking Brake

Page 13

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE

Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

1.Depress clutch/brake pedal all the way down and hold.

2.Pull parking brake lever up and release pressure from clutch/brake pedal. Pedal should remain in brake position.

Make sure parking brake will hold trac- tor secure.

Throttle/

 

Attachment

Clutch Lever

Choke

 

"Enc

Position

Control

_

 

nition

Key

 

 

 

 

 

 

,"Disengaged"

"Brake"

 

 

Position

 

 

 

 

Position

 

 

Parking Brake

 

 

 

"Engaged"

 

 

 

Position

 

 

 

 

Gearshift

Clutch/Brake

"Disengaged"

Lever

Position

 

 

Pedal

 

 

 

 

 

 

 

STOPPING

 

 

 

MOWER

BLADES -

 

 

•To stop mower blades, move attachment clutch lever to disengaged position.

GROUND DRIVE -

•To stop ground drive, depress clutch/ brake pedal all the way down.

•Move gearshift lever to neutral (N) position.

ENGINE -

•Move throttle control between half and

full speed (fast) position.

NOTE: Failure to move throttle control between half and full speed (fast) posi-

tion, before stopping, may cause engine to "backfire".

•Turn ignition key to "STOP" position and remove key. Always remove key when

leaving tractor to prevent unauthorized

use.

•Never use choke to stop engine.

IMPORTANT: Leaving the ignition switch in any position other than "STOP" will

cause the battery to discharge and go dead.

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas.

_CAUTION: Always stop tractor com- pletely, as described above, before leaving the operator's position.

TO USE THROTTLE CONTROL Always operate engine at full throttle.

•Operating engine at less than full throttle reduces the battery charging rate.

•Full throttle offers the best bagging and mower performance.

TO MOVE FORWARD AND BACKWARD

The direction and speed of movement is controlled by the gearshift lever.

1.Start tractor with clutch/brake pedal de- pressed and gearshift lever in neutral

(N)position.

2.Move gearshift lever to desired po- sition.

3.Slowly release clutch/brake pedal to start movement.

IMPORTANT: Bring tractor to a complete

stop before shifting or changing gears. Failure to do so will shorten the useful life

of your transaxle.

TO ADJUST MOWER CUTTING HEIGHT

The position of the attachment lift lever determines the cutting height.

•Grasp lift lever.

•Press plunger with thumb and move lever to desired position.

The cutting height range is approxi- mately 1-1/2 to 4". The heights are mea- sured from the ground to the blade tip with the engine not running. These heights

are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Crrftsmrn Limitedwarrantyon Craftsmanridingequipment General Operation II. Slope Operation Service Safe Handling of GasolineIII. Children IV. TowingGeneral Service Repair Protection Agreements ProductSeat Install Seat Tools Required for AssemblyBefore Removing Tractor Attach Steering WheelDjustmentKnobN Check BatteryCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemAttachment Keep Area Clear Slope Hazards ROS Know Your TractorHOW to USE Your Tractor To SET Parking Brake To Operate Mower Using the Reverse Operation SystemTo Operate Hills Towing Carts and Other Attach Ments To TransportBefore Starting the Engine Check Engine OIL Level ADD GasolineMowing Tips General Recommendations Maintenance ScheduleCheck Reverse Operation ROS System Check Operator Presence SystemBlade Care Blade RemovalEngine Lubrication Batt E RYSpark Plugs MufflerIN-LINE Fuel Filter Service or Adjustments CleaningTractor To Remove Mower SIDE-TO-SIDE Adjustment To Level Mower HousingFRONT-TO-BACK Adjustment To Replace Mower Blade Drive Belt To Adjust Steering Wheel Align Ment Transaxle Gear Shift Lever NEU- Tral AdjustmentFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsTo Replace Headlight Bulb Replacing BatteryInterlocks and Relays To Replace FuseEngine Cylinders Engine OILOther Cause Correction ProblemChoked Start EngineROS ProblemcauseMower blades will =-2 SchematicTractor - Model Number Electrical KEY Part Description ElectricalTractor - Model Number Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Ground Drive Tractor . . Model Number Tractor - Model Number Ground Drive Tractor - Model Number Steering Assembly KEY Part NO. NO.DESCRIPTION KEY Part Optional EquipmentTractor - Model Number Seat Assembly Wheels & Tires DecalsTractor - Model Number Lift Assembly Ii47142 Includes Oo% Part Description Tractor - Model Number Peerless Transaxle - Model NumberMST 20@ 6170 216 4311 3041 Briggs ENGINE-MODEL Number Tractor Model NumberBriggs ENGINE-MODEL Number 310707,TYPE Page Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationIiiiiiiiiiiiiiiiiiijiii Your Home

917.27537 specifications

The Craftsman 917.27537 is a high-performance lawn mower that offers an array of features and technologies designed to provide a superior cutting experience. This riding mower is well-suited for homeowners with medium to large-sized lawns, boasting a robust engine and efficient cutting capabilities.

At the heart of the Craftsman 917.27537 is a powerful 19 horsepower Briggs & Stratton engine. This engine has been specifically engineered for reliability and durability, ensuring that it can handle the rigors of mowing while providing consistent performance. The automatic transmission allows for smooth operation, enabling users to easily navigate their lawn without the need for constant gear shifting.

One of the standout features of the Craftsman 917.27537 is its 42-inch cutting deck. This wide cutting path is designed to efficiently cover more ground in a single pass, reducing mowing time and providing a cleaner cut. The cutting deck is crafted from high-quality materials to withstand wear and tear, ensuring longevity and durability over time. Additionally, the mower offers 6 height adjustment positions, allowing users to customize their grass cutting height to achieve the desired look of their lawn.

The mower is equipped with a built-in mulching capability, which is essential for maintaining a healthy lawn. By finely chopping the clippings and redistributing them back onto the lawn, it provides essential nutrients to the soil, promoting a lush and vibrant lawn. Furthermore, the side discharge feature helps to expel clippings efficiently, preventing clumps on the lawn.

User comfort is also a priority with the Craftsman 917.27537. The mower features an ergonomic seat and easy-to-reach controls, making it comfortable for extended mowing sessions. The inclusion of an easy-start ignition system means that users can get the mower up and running with minimal effort.

The Craftsman 917.27537 also emphasizes safety, with features like an automatic shut-off function that engages when the operator leaves the seat, ensuring peace of mind while mowing. The sturdy construction combined with modern engineering makes this model a reliable choice for home gardening enthusiasts looking for a high-quality lawn mower. Overall, the Craftsman 917.27537 is an exceptional option for anyone in search of efficiency, ease of use, and cutting technology.
Top Page Image Contents