Craftsman 917.27537 owner manual Batt E RY, Engine Lubrication

Page 19

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone

balancer. (When using a cone balancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

,.//

5/8" Bolt or Pi _'_-n

.J Blade

CentJ.o,e' -

BATT E RY

Your tractor has a battery charging system which is sufficient for normal use. How-

ever, periodic charging of the battery with an automotive charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

•Keep small vent holes open.

•Recharge at 6-10 amperes for 1 hour. NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and termi- nals can cause the battery to "leak" power.

1.Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.

2.Rinse the battery with plain water and dry.

3.Clean terminals and battery cable ends

with wire brush until bright.

4.Coat terminals with grease or petro- leum jelly.

5.Reinstall battery (See "REPLACING BATTERY" in the SERVICE AND AD-

JUSTMENTS section of this manual).

TRANSAXLE COOLING

Keep transaxle free from build-up of dirt and chaff which can restrict cooling.

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable.

Replace belts if they begin to slip from wear.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SG-SL. Se-

lect the oil's SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

-30-20 =100

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

oH wc 4_atl e

NOTE: Although multi-viscosity oils

(5W30, 10W30 etc.)improve starting in cold weather, the oils will result in in- creased oil consumption when used above 32°E Check your engine oil level more frequently to avoid possible engine dam- age from running low on oil.

Change the oil after every 25 hours of op- eration or at least once a year if the tractor is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fill cap/dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL

Determine temperature range expected

before oil change. All oil must meet API

service classification SG-SL.

•Be sure tractor is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

1.Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

2.Remove yellow cap from end of drain valve and install the drain tube onto the

fitting.

Oil Drain Valve

3.Unlock drain valve by pushing inward slightly and turning counterclockwise.

4.To open, pull out on the drain valve.

5.After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Crrftsmrn Limitedwarrantyon Craftsmanridingequipment General Operation IV. Towing Service Safe Handling of GasolineII. Slope Operation III. ChildrenGeneral Service Repair Protection Agreements ProductSeat Attach Steering Wheel Tools Required for AssemblyInstall Seat Before Removing TractorDjustmentKnobN Check BatteryCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsAttachment Keep Area Clear Slope Hazards ROS Know Your TractorHOW to USE Your Tractor To SET Parking Brake To Operate Mower Using the Reverse Operation SystemTo Operate Hills ADD Gasoline To TransportTowing Carts and Other Attach Ments Before Starting the Engine Check Engine OIL LevelMowing Tips General Recommendations Maintenance ScheduleBlade Removal Check Operator Presence SystemCheck Reverse Operation ROS System Blade CareEngine Lubrication Batt E RYSpark Plugs MufflerIN-LINE Fuel Filter Service or Adjustments CleaningTractor To Remove Mower SIDE-TO-SIDE Adjustment To Level Mower HousingFRONT-TO-BACK Adjustment To Replace Mower Blade Drive Belt To Remove Wheel for Repairs Transaxle Gear Shift Lever NEU- Tral AdjustmentTo Adjust Steering Wheel Align Ment Front Wheel TOE-IN/CAMBERTo Replace Fuse Replacing BatteryTo Replace Headlight Bulb Interlocks and RelaysEngine Cylinders Engine OILOther Start Engine ProblemCause Correction ChokedROS ProblemcauseMower blades will =-2 SchematicTractor - Model Number Electrical KEY Part Description ElectricalTractor - Model Number Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Ground Drive Tractor . . Model Number Tractor - Model Number Ground Drive Tractor - Model Number Steering Assembly KEY Part NO. NO.DESCRIPTION KEY Part Optional EquipmentTractor - Model Number Seat Assembly Wheels & Tires DecalsTractor - Model Number Lift Assembly Ii47142 Includes Oo% Part Description Tractor - Model Number Peerless Transaxle - Model NumberMST 20@ 6170 216 4311 3041 Briggs ENGINE-MODEL Number Tractor Model NumberBriggs ENGINE-MODEL Number 310707,TYPE Page Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationIiiiiiiiiiiiiiiiiiijiii Your Home

917.27537 specifications

The Craftsman 917.27537 is a high-performance lawn mower that offers an array of features and technologies designed to provide a superior cutting experience. This riding mower is well-suited for homeowners with medium to large-sized lawns, boasting a robust engine and efficient cutting capabilities.

At the heart of the Craftsman 917.27537 is a powerful 19 horsepower Briggs & Stratton engine. This engine has been specifically engineered for reliability and durability, ensuring that it can handle the rigors of mowing while providing consistent performance. The automatic transmission allows for smooth operation, enabling users to easily navigate their lawn without the need for constant gear shifting.

One of the standout features of the Craftsman 917.27537 is its 42-inch cutting deck. This wide cutting path is designed to efficiently cover more ground in a single pass, reducing mowing time and providing a cleaner cut. The cutting deck is crafted from high-quality materials to withstand wear and tear, ensuring longevity and durability over time. Additionally, the mower offers 6 height adjustment positions, allowing users to customize their grass cutting height to achieve the desired look of their lawn.

The mower is equipped with a built-in mulching capability, which is essential for maintaining a healthy lawn. By finely chopping the clippings and redistributing them back onto the lawn, it provides essential nutrients to the soil, promoting a lush and vibrant lawn. Furthermore, the side discharge feature helps to expel clippings efficiently, preventing clumps on the lawn.

User comfort is also a priority with the Craftsman 917.27537. The mower features an ergonomic seat and easy-to-reach controls, making it comfortable for extended mowing sessions. The inclusion of an easy-start ignition system means that users can get the mower up and running with minimal effort.

The Craftsman 917.27537 also emphasizes safety, with features like an automatic shut-off function that engages when the operator leaves the seat, ensuring peace of mind while mowing. The sturdy construction combined with modern engineering makes this model a reliable choice for home gardening enthusiasts looking for a high-quality lawn mower. Overall, the Craftsman 917.27537 is an exceptional option for anyone in search of efficiency, ease of use, and cutting technology.
Top Page Image Contents