System components and expansions | chipDISK for RemoteView |
8.4chipDISK for RemoteView
To use RemoteView, the remote test and diagnosis system, on the server, a RemoteView chipDISK is available for the PRIMERGY B120 server as an option. The RemoteView chipDISK is equipped with an IDE interface and is mounted in the server on the side of the drive cage on two spacer sleeves.
8.4.1 Installing/removing the chipDISK
ÊExit the operating system, switch off the server and disconnect it from the power supply.
! | Switching off the server does not disconnect the device from the network. To completely | |
disconnect the device from the network, remove the power plug from the line voltage. | ||
|
Ê Open the server, and remove the side cover and the slot cover (see the chapter "Opening and closing the server").
1
M S C
2
3
ÊConnect the plug of the IDE ribbon cable to the IDE connection (2) and the small plug of the power supply cable to the power supply connection (3) of the chipDISK board.
!
Make sure the jumper (1) is set to M.
ÊOpen the server (see "Opening and closing the server").
52 |
