Craftsman 917.27603 manual To Replace Mower Drive Belt, Mower Drive Belt Removal, CoverPulleys

Page 24

TO REPLACE MOWER DRIVE BELT

MOWER DRIVE BELT REMOVAL

1.Park tractor on a level surface. Engage parking brake,

2.Remove screws from L.H. mandrel cover and remove cover,

3.Roll belt over the top of LH. mandrel pulley.

4.Remove belt from electric clutch pulley.

5.Remove belt from idler pulleys.

6.Remove any dirt or grass c_ippings which may have accumulated around

mandrels and entire upper deck sur- face.

7.Check primary idler arm and two idlers to see that they rotate freely.

8.Be sure spring is securely hooked to primary idler arm and bolt in mower housing.

MOWER DRIVE BELT INSTALLATION

9.Install belt in both idlers. Make sure

belt is in both belt keepers at the idlers as shown.

10.Install new belt onto electric clutch pul-

Py.

11.Roll belt into upper groove of L.H, man- drel pulley,

12.Carefully check belt muting making sure belt is in the grooves correctly and inside belt keepers,

13.Reassemble LH. mandrel cover.

Screws

L.H.

MandrelIdler

CoverPulleys

Electric

Primary Idler ArmClutch

Spring Pulley

L.H.

Mandrel

Bolt in

Mower

Housing

Mower Drive Belt

Belt Keepers

24

Image 24

Contents Jcriiftsmiimj Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation II. Slope OperationIV. Service Do notIII. Children Mow up and down slopes 15 Max, not across Product Specifications Repair AgreementGasoline Gallons UnleadedSeat MowerLoop Gauge WheelsTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat Install Mower and Drive Belt Check for Proper Position of ALL Belts Checktire PressureCheck Mower Levelness Check Brake SystemIf not avoided, could result In death, serious injury Property damageKnow Your Tractor Lift LeverHeight HOW to USE Your Tractor To Adjust Gauge Wheels Switch Pull Out to LowTo Operate Mower To Stop Mower BladesBefore Starting the Engine Mowing Tips Lubrication Chart Tef SystemsRepa Spark= ug General RecommendationsTractor Brake OperationTires Operator Presence SystemCheck Transaxle OIL Level Remove left rear wheel by removing hub botsBelts LubricationClean AIR Screen Engine OIL FilterAIR Rlter MufflerVice or Adjustments To Level Mower HousingTractor To Remove MowerAlternate SIDE-TO-SIDE Adjustment Method Bubble Between Bubble Level LinesFRONT-TO-BACK ADJ Ustm ENT Front PlateMower Drive Belt Installation To Replace Mower Drive BeltMower Drive Belt Removal CoverPulleysTo Adjust Attachment Clutch To Check and Adjust BrakeTo Adjust Brake To Replace Mower Blade Drive BeltTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN AdjustmentTo Replace Motion Drive Belt To Check TOE-INAdjustment Sleeves Replacing BatteryTo Remove Wheel for Repairs Front Wheel To Start Enginewith Aweak BAT TeryTo Adjustthrottle Control Cable To Replace FuseTo Remove Hood and Grill AS- Sembly EngineTo Adjust Choke Control To Adjust CarburetorPreliminary Setting Final SettingBattery Engine OILCylinders OtherProblem Cause CorrectionProblem Cause Troubleshooting Chart Problem Cause CorrectionPage 111 Tractor - Model NumberTractor - Model Number Electrical Electrical KEY Part DescriptionTractor - Model Number Chassis and Enclosures KEY Part Ground Drive Gearshift, Lever Assembly Tractor - Model Number Ground DriveTractor - Model Number Steering Assembly 6855M Tractor - Model Number Spark Arrester KITPulleyV-Idler 250 Tractor - Model Number Seat Assem BLY WasherDecals Wheels & TiresTractor - Model Number Lift Assembly 137150 Spring. Compression Inf Hgt Tractor - Model Number Mower Deck 850857 Transaxle Tractor --MODEL Number 917,276030 Transaxle KEY PartYlinder HEAD, Valve and Breather Crankcase KEY Part NO. no DescriptionIGNITION/ELECTRICAL Blower Housing and Bafflesj AIR Intake J AIR INTAKF-JFILTRATION =,, I,,7 Starter,solenoidshift 19 -139-57-S\ Z Exhaust KEY Part Description Page Suggested Guide for Sighting Slopes for Safe Operation Your Home Anytime, day or night