Craftsman 917.289470 manual To Stop Mower Blades, Reverse Operation System ROS, Ments

Page 17

TO STOP MOWER BLADES

Disengage attachment clutch control.

_CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield

(S) in place.

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse

Operation System (ROS). Any attempt by the operator to travel in the reverse direction

with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

_WARNING: Backing up with the at+

tachment clutch engaged while mowing is

strongly discouraged.Purning the ROS "O N", to allow reverse operation with the attach+ ment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless

absolutely necessary.

USING THE REVERSE OPERATION SYSTEM Only use ifyou are certain no children or other bystanders will enter the mowing area.

1.Depress brake pedal all the way down.

2.With engine running, turn ignition key

counterclockwise to ROS "ON" position+

3.Look down and behind before and while backing.

4.Slowly depress reverse drive pedal to start movement.

5+ When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON +'Position

Engine "ON" Position

(Normal Operating)

 

TO OPERATE ON HILLS

_WARNtNG: DO not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide provided at the back of this manual.

Choose the slowestspeed before starting up or down hills+

Avoid stopping or changing speed on hills.

If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

To restart movement, slowly release park-

ing brake and brake pedal.

,Slowly depress appropriate drive pedal to slowest setting.

°Make all turns slowly_

TO TRANSPORT

When pushing or towing your tractor, be sure to disengage transmission by placing

freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor+

Raise attachment lift to highest position with attachment lift control.

Pull freewheel control out and into the slot

and release so it is held in the disengaged position.

-Do not push or tow tractor at more than two (2) MPH°

To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or atrailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH-

MENTS

Tow only the attachments that are recom- mended by and comply with specifications of the manufacturer of your tractor. Use

common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

t7

Image 17
Contents GA E Tracto Sears, Roebuck and Co., Hoffman Estates, IL Craftsman Full Warranty TWO Years on Riding EquipmentGeneral Operation II!, Children ServiceIV, Towing Safe Handling of GasolineAndtightensecurely GeneralserviceRepair Protection Product411111 To Remove Tractor from Carton Unpack Carton To Check BatterySET Parking Brake Lever and Lower Attachment Lift Lever ADJ UST S EATSlide Mower Under Tractor Turn Steering Wheel Left and Position MowerTo Front of Mower ANTI-SWAY BAR S Install ANTI-SWAY BAR S If EquippedAttach Mower Side Suspension Arms a to Chassis Attach Rear Lift Links CMower Drive Belt Installation Install Belt on Engine Clutch Pulley MAttach Front Link E Replace Mower Blade Drive BeltCheck Brake System ChecklistCheck Deck Levelness Fire indicates a hazard which, if not avoided @@@@Service Reminder / Hour Meter Attachment Clutch SwitchKnow Your Tractor TractorStopping HOW to USE Your Tractor Engine To SET Parking BrakeMower Blades To USE Throttle Control D Ground DriveTo Operate Mower To Adjust Gauge WheelsTo Move Forward and Backward Ments To Stop Mower BladesReverse Operation System ROS To Start Engine Before Starting the Engine Check Engine OIL LevelReserve Fuel Valve Operation Purge Transmission Automatic Transmission Warm UPMowing TiPS Lubrication Chart Maintenance ScheduleBfore Every General RecommendationsBlade Removal TiresTransaxle Pump Fluid TransaxlemaintenanceBelts Engine LubricationIN-LINE Fuel Filter AIR FilterMuffler Deck Washoutport CleaningMovable parts To Install Mower AdjustmentsTo Level Mower Precision SIDE-TO-SIDE AdjustmentFRONTTO-BACK Adjustment To Replace Mower Drive Belt Belt InstallationMower Drive Belt Removal To Replace Motion Drive BeltFront Wheel TOE-IN/CAMBER To Check BrakeTo Start Engine with a Weak BAT- Tery To Attach Jumper CablesTo Adjust Throttle Control Cable Replacing BatteryInterlocks and Relays To Remove Hood and GrillFuel System BatteryEngine OIL CylindersHard to start All wiringEngine will not turn over Air filterCorrection ProblemCause Correction ITO ILlt ==I DOS Anos Para EL Equipo Tractor Ii. Funcionamiento EN Pendientes Funcionamiento GeneralIV. Remolque III, Nlf4OSSERVIClO Manipulacion Segura DE LA GasolinaPage RESPONSABtLIDADES DEL Cliente Especificaciones DEL ProductoAcuerdos DE Proteccion Para LA Reparacion MY-HOMESogodora Para HerramientasEL Montaje Instale LA SegadoraDeslice LA Cortadora DE Cesped Debajo DEL Tractor Ubique LA Cortadora DE C#SPEDInstale LOS Eslabones DE LEVAN- Tamiento Traseros C SI LA TIENE, Instale LA Barra Antibalanceo SReemplazar LA Correa DE LA Cuchilla Instale LA Correa EN LA Polea DEL Embrague DEL Motor MLista DE Revisin REVIS16N DE I.A Presion DE LAS LlantasRevision DE LA Nivelacion DEL CON Junto @@@ Palanca DE Mando Crucero Istema DE Funcionamiento HaoiaPedal DE Marcha Adelante Pedal DE Marcha AtrasMotor Parada Cuchillas DE LA SegadoraPara Usar EL Control DE LA Aceler Impulsion DE RecorridoDoras Utilizar EL Mando CruceroLA Segadora Funcionamiento Atras SegadoraTransmisi6n Desenganchada Remolque DE Carretillas O Otros AccesoriosLina DE Reserva MECAI,IISMO DE Aviso DE SERVICiOEL Motor Arranque CON Tiempo FRO 50/i00 Y Arranque CON Tiempo Templado 50F/10C V MASMenos AutomaticaConsejos Para Segar Antes DE Cada USO Mantenimiento Caduso eCada C,DA Tabla LubricacionVERIF1EZ Sistema Presencia Operador LlantasCuidado DE LA Cuchilla Remocion DE LA CuchillaMotor Nivel DEL Fluido DE LA Bomba DEL TransejeLimpieza DE LA Entrada DE AIRE/AREAS DE Enfriamento Limpieza DE LA Rejilla DE AireSilenciador BujjasPuerto de LimpiezaPuerto DE Lavado DE LA Cubierta Para Instalar LA Segadora Para Desmontar LA Cortadora DEClaSPED Cuidado Ajuste DE Delante a AtrasLado Montaje DE LA Correa DE LA Segadora Para Reemplazar LA Correa DE LA CUCH1LLA DE LA SegadoraPara Cambiar LA Correa DE Impulsion DE Movimiento Desmontaje DE LA CorreaIMPRESlON / Inclinacion DE LAS Ruedas Delanteras Verifique EL FrenoPara Remover LAS Ruedas Para Hacer Reparaciones LlaveCuadradarueda .==== traserasolarnentePara Remover EL Conjunto DEL Capo Y DEL Enrejado Reemplazar LA BateriaPara Cambiar LA Bombilla DE LA LUZ Delantera Entrecierre Y RelisImportante Es important evitar que se for Motor Sistema DE CombustibleAceite DEL Motor CilindrosDtficll de No arrancaEl motor no El motorIdentificacion DE Problemas IDENTIFICACI6N DE Problemas Page Gtl Www,sears,com Www,sears.corn Wwwsears,ca800827-6655 usA Canada 800.LE.FOYER Mc

917.28947, 917.289470 specifications

The Craftsman 917.28947 and 917.289470 are robust lawn tractors designed for homeowners seeking durability, performance, and comfort in their yard care equipment. These models stand out in the Craftsman line due to their exceptional features, advanced technologies, and user-friendly characteristics.

At the core of both models is a powerful engine, typically a 19 HP or higher, ready to tackle various mowing conditions. The engine is combined with a smooth-running automatic transmission that facilitates easy operation, allowing the driver to focus on the task without worrying about shifting gears. This feature makes mowing large lawns or navigating through obstacles much simpler.

One of the most notable characteristics of the Craftsman 917.28947 and 917.289470 is their 42-inch cutting deck. This size is ideal for providing a quick yet efficient cut, capable of maneuvering in tighter spaces while still covering more ground than smaller decks. The cutting height can be easily adjusted to meet the needs of different types of grass and preferred lawn styles. This adaptability is part of what makes these models particularly appealing to a diverse range of users.

Incorporating advanced technologies, these lawn tractors often feature an ergonomic design, including a plush seat with back support that provides comfort during prolonged use. The easy-to-read dashboard displays critical information such as fuel level, speed, and battery status, allowing users to monitor their operation effectively.

Additionally, both models come equipped with essential safety features such as a safety switch that prevents the engine from starting when the operator is not seated. This attention to safety ensures peace of mind during operation, especially for those who may have children or pets around while mowing.

In terms of maintenance, the Craftsman 917.28947 and 917.289470 include features designed to make care manageable. The accessible design allows for easy cleaning and part replacement when necessary, ensuring that the tractors remain in top condition throughout their lifespan.

Overall, the Craftsman 917.28947 and 917.289470 represent a great combination of power, efficiency, and comfort, making them excellent choices for homeowners looking to maintain their lawns with ease and reliability. Whether tackling a small yard or a larger landscape, these lawn tractors are equipped to deliver effective performance season after season.