3.ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole
in arm over pin (B) on outside of tractor chassis and secure with retainer spring.
4o Repeat on opposite side of tractor.
5.ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot
in link assembly over pin (D) on rear mower bracket and secure with washer
and retainer spring.
,=!::!:
6.ATTACH FRONT LINK (E) - Work from left side of tractor. Insert rod end of link assembly through front hole in tractor front suspension bracket (F).
7.Insert end of link (E) into hole in front mower bracket (H) and secure with washer and retainer spring (J),
8o Hook end of clutch cable spring (Q) into hole in idler arm (R),
9. Push clutch cable housing guide (P) into bracket, slide collar (L) onto guide and secure with retainer spring (K),
10o Install belt onto engine pulley (M) and belt keepers (G).
IMPORTANT: Check belt for proper routing in all mower pulley grooves.
11oRaise attachment lift lever to highest position.
12, If necessary, adjust gauge wheels before
operating mower as shown in the Opera- tion section of this manual.
O3042tox
22