Craftsman 917.273631 manual Tractor To Remove Mower

Page 21

Clean engine, battery, seat, finish, etc. of all foreign matter.

Keep finished surfaces and wheels free of all gasoline, oil, etc.

Protect painted surfaces with auto- motive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and transmis- sion are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower.

WARNmNG: TO AVOmD SERmOUS mNJURY, BEFORE PERFORMmNG ANY SERVICE OR ADJUSTMENTS:

1.Depress clutch/brake pedal fully and set parking brake.

2.Place gearshift lever in neutral (N) position.

3.Place attachment clutch in "DISENGAGED" position.

4.Turn ignition key to "STOP" and remove key.

5.Make sure the blades and all moving parts have completely stopped.

6.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER

Mower will be easier to remove from the right side of tractor.

1.Place attachment clutch switch in "DIS- ENGAGED" position.

2.Move attachment lift lever forward to lower mower to its lowest position.

3.Roll belt off electric clutch pulley.

4.Disconnect anti-sway bar from chassis bracket by removing retainer spring.

5.Disconnect suspension arms from rear deck brackets by removing retainer springs.

6.Disconnect front links from deck by removing retainer springs.

7.Raise lift lever to raise suspension arms. Slide mower out from under trac- tor.

mMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links.

TO mNSTALL MOWER

1.Raise attachment lift lever to its highest position.

2.Slide mower under tractor with deflec- tor shield to right side of tractor.

3.Lower lift lever to its lowest position.

4.Connect front links to mower deck and secure with retainer springs.

5.Connect suspension arms to rear deck brackets and secure with retainer

springs.

6.Connect anti-sway bar to chassis bracket and secure with retainer spring.

7.Install belt into electric clutch pulley groove.

Suspension Arms

Electric Clutch Pulley

 

 

:ront Link

Retainer

Spring

Retainer Springs

(Both Sides)

Anti-Sway

Bar

Shield

Retainer Spring

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Craftsmiin Sears, Roebuck and Co.,Dept.817WA, Hoffman Estates, IL Limitedwarrantyon CraftsmanridingequipmentSlope Operation Do not Taft grass can hide obstaclesPage RC12YC IAPFSG-SLPSI U1ROil Drain Tube For Future Use HOW to SET UP Your Tractor Check Battery Adjust SeatTo Remove Tractor from Carton Unpack Carton Reposition RmGHT Rear Gauge Check for Proper POSmTmON ALL BeltsCheck Brake System @@@@ Know Your Tractor STOPPmNG To Transport To Adjust Gauge WheelsTo Operate Mower To Operate on HillsBefore Starting the Engine Check Engine OIL Level ADD GasolineTo Start Engine 00272 Before Each USE ErvcdatesOperator Presence System TractorBlade Care Blade RemovalTransaxle Cooling To Clean Battery and TerminalsBatt E RY To Change Engine OILSpark Plugs IiufflerTractor To Remove Mower Alternate SIDE-TO-SIDE Adjustment Method SIDE-TO-SIDE Adjustment with Bubble LevelTo Check and Adjust Brake Belt InstallationTo Adjust Brake Both Front Links Must be Equalin LengthMent Transaxle Gear Shift Lever NEU- Tral AdjustmentFront Wheel TOE=IN/CAMBER To Remove Wheel for RepairsTo Remove Hood and Grill AS- Sembly Preliminary Setting To Adjust CarburetorFinal Setting Acceleration TestEngne OIL Fuel SystemCause Engine Continues CORRECTmONTo run when Operator Leaves Seat With attach Ment Clutch EngagedBattery wiii not charge Problem CauseCORRECTmON Mower blades wiii Remove Obstruction Not rotateBlack Tractor o o Model Number SCHEMATmCTractor - Model Number J21Electrical ELECTRmCAL Tractor o o Model NumberTractor o o Model Number 917.273631 CHASSmS and Enclosures KEY Part Tractor ooMODEL Number 917.273631 CHASSmSAND EnclosuresTractor - Model Number Ground Drive Ground DRmVE Tractor Model NumberSTEERmNG KEY Part Optional Equipment DESCRiPTiON KEY Tractor Model Number Seat AssemblyPart Description DecalsUFT Assembly KEY Part Description Tractor - Model Number UFT AssemblyMower Deck KEY Part NO. NO.DESCRIPTION Tractor Model Number DANATRANSA×LE==MODELNUMBER4360 EMD Dana TRANSAXLE==MODEL Number 4360 EMD LOO8 144I 947 Intake 267 695134 Screw Casing Clamp 691279 Tractor ooMODEL Number Page Suggested Guide for Sighting Slopes for Safe Operation Canada IiiiiiiiiiiiiiiiiiiiIiiiiiiiiiiiiiiiiii Rev 7.6.04 TRiMH
Top Page Image Contents