Craftsman 917.374360 owner manual Lawn Mower, Drive Wheels

Page 14

LAWN MOWER

Always observe safety rules when per- forming any maintenance.

TIRES

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check rear drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash,

grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels.

If necessary to clean the drive wheels, be sure to clean both rear wheels.

5.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

6.Use block of wood between blade and

lawn mower housing and tighten the blade bolt, turning clockwise.

•The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual.

BLADE CARE

For best results, mower blade must be kept

sharp. Replace a bent or damaged blade. A CAUTION: Use only a replacement

blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is haz- ardous, could damage your mower and void your warranty.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and mower housing to prevent blade from

turning when removing blade bolt. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade and attaching hardware (bolt, lock washer, hardened washer).

6.Remove debris shield.

NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE

1.Position blade adapter on engine crank- shaft. Be sure key in adapter and crank-

shaft keyway are aligned; and that drive belt is inside tabs of belt retainer.

2.Install debris shield.

3.Position blade on the blade adapter. IMPORTANT: To ensure proper assembly, center hole in blade must align with star on blade adapter.

4.Be sure the trailing edge of blade (oppo- site sharp edge) is up toward engine.

 

 

Belt

 

retainer

 

Trailing

edge

Blade adapter

 

 

 

Hardened

Debris shield

washer

 

Lockwasher

Blade

Blade

bolt

TO SHARPEN BLADE

NOTE: We do not recommend sharpening

blade - but if you do, be sure blade is bal- anced. An unbalanced blade will cause

eventual damage to mower or engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a

5/8" diameter steel bolt, pin, ora cone bal- ancer. (When using a cone balancer, follow instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

Center hole

5/8" bolt or pin

14Blade

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Craftsman Yearfull Warranty on Craftsman Lawn Mower Your Safety is InvolvedDo not General OperationIV. Safe Handling of Gasoline General Service RJ19HXLawn Mower Maintenance Lawn Mower PerformanceMowing To Remove Mower from CartonTo Unfold Handle PositionTo Assemble Grass Catcher To Prepare BatteryTo Install Attachments Meets Cpsc Safety Requirements Know Your Lawn MowerHOW to USE Your Lawn Mower For Rear Bagging Rear BaggingSide Discharging To Convert MowerBefore Starting Engine Mulching Mowing Tips Mowing TipsLubrication General RecommendationsBefore Each USE Before After EveryLawn Mower Drive WheelsGear Case To Clean AIR FilterGrass Catcher Engine LubricationWater Washout Feature CleaningClean Under Drive Cover MufflerTo Remove Drive Belt To Adjust HandleRear Deflector To Replace Drive BeltEngine Speed CarburetorHandle Fold Forward for Storage Mowing PositionOther BatteryProblem Cause Correction Fuel SystemProblem Need More HELP?Sears, Roebuck and Co., Hoffman Estates, IL SU Seguridad Esta ComprometidaII. Operacion Sobre LAS Cuestas OperacionIII. Ninos HacerSAE RJ19HXRendimiento DE LA Segadora Mantenimiento DE LA SegadoraComo Preparar SU Segadora Para Remover LA Segadora DE LA Caja DE CartonPara Montar EL Recogedor DE Para Instalar LOS AccesoriosFamiliaricese CON SU Segadora Cumple CON LOS Requisitos DE Seguridad DE LA CpscControl DE LA IMPULSI6N Como Usar SU SegadoraVelocidad DEL Motor Ajuste DEL MandoSegadoras CON Descarga Lateral Para Convertir LA SegadoraSegadoras CON Descarga Trasera Para Ensacamiento TraseroAntes DE Hacer Arrancar EL Motor Para Parar EL MotorOnsejos Para Segar Consejos Para Segar Y ACOL- CharLubricacion Recomendaciones GeneralesAntes DE Cada USO Tabla DE LubricacionRuedas DE IMPULSI6N SegadoraLlantas Cuidado DE LA CuchillaMotor Lubricacion Limpie Debajo DE LA Cubierta DE LA Impulsion LimpiezaDerrubio DEL Agua Desviador Trasero SegadoraLA Altura DE Corte Para Remover Correa DE ImpulsionMango MotorCarburador Aceite DEL Motor Problema CausaMotor CilindroCorreccion ProblemaCausa Craftsman Rotary Lawn Mower - Model Number Description CraftsmanKEY Part Description1833 KEY PartBriggs & Stratton 4-CYCLE Engine Model Number 128T05-1268=B1 564 883 Briggs & Stratton Cycle Engine Briggs & STRATTON4-CYCLE Engine Service Notes Service Notes Serifs

917.374360 specifications

The Craftsman 917.374360 is a robust and reliable lawn tractor designed for homeowners seeking efficiency and performance in their lawn care routine. With features that cater to both ease of use and powerful performance, this machine stands out in the crowded market of lawn maintenance equipment.

One of the main features of the Craftsman 917.374360 is its powerful 24 HP Briggs & Stratton engine. This engine provides ample power for tackling even the toughest of lawns, ensuring that users can cut through thick grass and uneven terrain with minimal effort. Coupled with a 54-inch cutting deck, the tractor enables users to cover a significant area in a shorter amount of time, making it an excellent choice for larger properties.

The Craftsman 917.374360 also incorporates a hydrostatic transmission, which allows for smooth and seamless speed changes. This type of transmission provides users with greater control over their mowing speed, enhancing the overall mowing experience. The user-friendly foot pedal control further adds to the convenience, allowing for effortless operation without the need to repeatedly change gears.

Ergonomics play a critical role in the design of this lawn tractor. The high-back seat provides comfort during long mowing sessions, while the adjustable steering wheel ensures that users of all heights can find a comfortable operating position. Additionally, the tractor features an easy-to-use dash panel that displays all necessary information, including fuel level and engine status, allowing the operator to keep track of performance at a glance.

The Craftsman 917.374360 incorporates innovative technologies such as a dual-blade system, which promotes a cleaner cut and helps in maintaining a healthy lawn. The mulching capability allows for grass clippings to be finely chopped and recycled back into the lawn, providing natural nutrients to the soil and reducing the need for bagging.

Furthermore, the tractor is equipped with a reinforced steel frame, providing durability and longevity. This robust construction is essential for withstanding the wear and tear often associated with regular lawn maintenance. With an array of attachment options, including baggers and tow-behind trailers, the Craftsman 917.374360 can be customized for a variety of tasks, making it a versatile tool for any homeowner.

In conclusion, the Craftsman 917.374360 stands out as a reliable and efficient lawn tractor with features and technologies designed to enhance the user experience. From its powerful engine to its ergonomic design, this machine promises to make lawn care a breeze. Whether it's a sprawling estate or a modest backyard, the Craftsman 917.374360 is equipped to deliver impressive results with ease and comfort.
Top Page Image Contents