Craftsman 917.273763 owner manual To Adjust Gauge Wheels, To Operate on Hills

Page 14

For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

1.Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING HEIGHT" in this section of manual).

2.With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in ap- propriate hole with shoulder bolt, 3/8 washer, and 3/8-16 Iocknut and tighten securely.

3.Repeat for opposite side, installing gauge wheel in same adjustment hole.

Attachment

_

-_.

Attachemnt

Clutch Lever

'"/_

_)_ /

Lift Lever

"Engaged"

_

_

_/_ High.

Position

_

_

Pos,t,on

 

 

 

Pos t on

"pD°isi_ingaged"_

 

_ _ Deflector

 

 

 

Shie,d

TO OPERATE ON HILLS

_,WARNING: Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide at the back of this manual.

• Choose the slowest speed before start-

ing up or down hills.

• Avoid stopping or changing speed on

hills.

If slowing is necessary, move throttle

control lever to slower position.

• If stopping is absolutely necessary, push

clutch/brake pedal quickly to brake posi-

tion and engage parking brake.

Gauge Wheel

o\

• Move motion control lever to neutral (N)

position.

Mounting _

Bracket ,,<

Locknut

Gauge Wheel

Bolt

IMPORTANT: The motion control lever does not return to neutral (N) position when the clutch/brake pedal is depressed.

To restart movement, slowly release parking brake and clutch/brake pedal.

Slowly move motion control lever to slowest setting.

Make all turns slowly.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equip- ment on rough, rolling terrain or hills.

1.Select desired height of cut.

2.Start mower blades by engaging at- tachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

_,CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

TO TRANSPORT

When pushing or towing your tractor, be sure to disengage transmission by placing

freewheel control in freewheeling position. Freewheel control is located at the rear

drawbar of tractor.

1.Raise attachment lift to highest position with attachment lift control.

2.Pull freewheel control out and down into the slot and release so it is held in

the disengaged position.

Do not push or tow tractor at more than two (2) MPH.

To re-engage transmission, reverse above procedure.

14

Image 14
Contents Crrftsmrni Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation II. Slope OperationIII. Children IV. ServiceDo not Page Repair Protection Agreements Sears Installation ServiceCustomer Responsibilities Steering To Remove Tractor from Howto SET UP Your TractorTools Required for Assembly Before Removing Tractor from Skid Attach Steering WheelCheck Battery AdjTo Convertto Bagging or Discharging Install Mulcher PlateCheck Deck Levelness Check for Proper Position of ALL BeltsH L I,,I Know Your Tractor To Move Forward and Backward HOW to USE Your TractorTo SET Parking Brake Ground DriveTo Adjust Gauge Wheels To Operate on HillsCheck Engine OIL Level Before Starting the EngineTowing Carts and Other ATTACH- Ments ADD GasolineAutomatictransmissionwarmup Purge TransmissionMowing Tips Mulching Mowing TipsGeneral Recommendations Before Each USEBlade Removal BatteryOperator Presence System To Sharpen BladeLubrication Transaxle Pump FluidBelts Clean AIR Screen Spark PlugsCleaning Protect painted surfaces with automotive Type waxTractor Service or AdjustmentsTo Install Mower To Remove MowerBelt Removal To Level Mower HousingSIDE-TO-SIDE Adjustment To Adjust Brake Belt InstallationTo Check and Adjust Brake To Check BrakeTo Adjust Steering Wheel Align Ment Transaxle Motion Control LE- VER Neutral AdjustmentTransmission Removal Replacement To Remove Wheel for RepairsTo Replace Fuse Replacing BatteryInterlocks and Relays To Remove Hood and Grill AS- SemblyPreliminary Setting To Adjustthrottle Control CableTo Adjust Carburetor EngineFuel System BatteryTractor Troubleshooting Chart ProblemCause VibrationSlow OFFTractor - Model Number Schematic O111LACKTractor - Model Number Electrical KEY Part Description Tractor - Model Number 917.273763 Chassis and Enclosures Tractor --MODEL Number Chassis and Enclosures 212 Insert Lens ReflectiveTractor - Model Number Ground Drive Tractor -- Model Number Ground Drive 561Tractor - Model Number 917.273763 Steering Assembly Tractor - Model Number 917.273763 Steeringassembly Tractor - Model Number Engine KEY PartTractor - Model Number Seat Assembly Tractor - Model Number Decals Wheels & TiresTractor - Model Number Lift Assembly Tractor - Model Number Mower Deck KEY Part NO. no Description Zr- c Tractor Model Number Hydro Gear Transaxle - Model Number437 084 \WZI o1lo= ql 13o03 31oi 7,,9 Governor Crank Tractor - Model Number Label-EmissionsSuggested Guide for Sighting Slopes for Safe Operation 6E/ R

917.273763 specifications

The Craftsman 917.273763 is a powerful and versatile lawn mower designed to meet the needs of residential users seeking reliability and performance. This machine stands out in the crowded market of lawn care equipment due to its robust features, advanced technology, and user-friendly design.

One of the primary characteristics of the Craftsman 917.273763 is its efficient 25-horsepower engine. This powerful engine ensures that the mower can easily handle thick grass and challenging terrain, providing a clean and even cut every time. The mower's cutting deck measures 54 inches, which strikes a balance between maneuverability and efficiency. This size allows users to cover larger areas in less time, making it an excellent choice for homeowners with expansive lawns.

The cutting height is adjustable, enabling users to select from multiple cutting positions based on their lawn's needs. This flexibility not only promotes healthier grass growth but also accommodates different landscaping styles. The mower is equipped with a dual-blade system, which enhances grass cutting performance and helps to produce fine clippings that can be left on the lawn as natural mulch.

One of the standout technologies in the Craftsman 917.273763 is its electronic ignition system, which provides reliable starting performance every time. This innovation eliminates the guesswork often associated with traditional ignition systems and enhances overall ease of use. Additionally, the mower comes with a hydrostatic transmission, which offers smooth and effortless speed adjustments. Users can shift seamlessly from forward to reverse, a feature that greatly enhances maneuverability, especially in tight spaces.

Comfort is another key aspect of this mower's design. The operator's seat is cushioned and adjustable, allowing users to find their preferred position for prolonged mowing sessions. The steering wheel is ergonomically designed, and controls are within easy reach, making it user-friendly for individuals of all ages.

Safety features are also integral to the Craftsman 917.273763. It includes blade brake technology, ensuring that the mower's blades stop within seconds of releasing the drive lever. This feature significantly reduces the risk of accidents.

In summary, the Craftsman 917.273763 stands out due to its powerful engine, adjustable cutting capabilities, comfortable design, and advanced technologies. Whether managing a small yard or a larger property, this mower delivers the performance and reliability homeowners need for maintaining a pristine lawn.