Craftsman 917.273763 owner manual Transaxle Pump Fluid, Belts, Lubrication

Page 20

Keep battery bolts tight.

Keep small vent holes open.

Recharge at 6-10 amperes for 1 hour. NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to "leak" power.

1.Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.

2.Rinse the battery with plain water and dry.

3.Clean terminals and battery cable ends with wire brush until bright.

4.Coat terminals with grease or petro- leum jelly.

5.Reinstall battery (See "REPLACING BATTERY" in the Service and Adjust- ments section of this manual).

TRANSAXLE COOLING

The transmission fan and cooling fins should be kept clean to assure proper cooling.

Do not attempt to clean fan or transmis- sion while engine is running or while the transmission is hot. To prevent possible

damage to seals, do not use high pressure water or steam to clean transaxle.

Inspect cooling fan to be sure fan blades are intact and clean.

Inspect cooling fins for dirt, grass clip- pings and other materials. To prevent damage to seals, do not use com- pressed air or high pressure sprayer to

clean cooling fins.

TRANSAXLE PUMP FLUID

The transaxle was sealed at the factory

and fluid maintenance is not required for the life of the transaxle. Should the trans-

axle ever leak or require servicing, contact a Sears or other qualified service center.

SAE V{SCOS_TY GRADES

8o

oH vise chmrll e

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, they will result in increased oil consumption when used above 32°E Check your engine oil level more frequent- ly to avoid possible engine damage from running low on oil.

Change the oil after every 50 hours of op-

eration or at least once a year if the tractor is not used for 50 hours in one year. Check the crankcase oil level before start-

ing the engine and after each eight (8) hours of operation. Tighten oil fill cap/

dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL

Determine temperature range expected

before oil change. All oil must meet API service classification SG-SL.

Be sure tractor is on level surface.

Oil will drain more freely when warm.

Catch oil in a suitable container.

1.Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

2.Remove yellow cap from end of drain valve and install the drain tube onto the

fitting.

Oil Drain Valve

Closed and Locked Position

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace

if necessary. The belts are not adjustable.

Replace belts if they begin to slip from wear.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SG-SL Se-

lect the oil'sSAE viscosity grade according to your expected operating temperature.

Drain Tube

3.Unlock drain valve by pushing inward slightly and turning counterclockwise.

4.To open, pull out on the drain valve.

5.After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.

6.Remove the drain tube and replace the cap onto the end of the drain valve.

20

Image 20
Contents Crrftsmrni Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation II. Slope OperationIII. Children IV. ServiceDo not Page Repair Protection Agreements Sears Installation ServiceCustomer Responsibilities Steering Howto SET UP Your Tractor Tools Required for AssemblyTo Remove Tractor from Before Removing Tractor from Skid Attach Steering WheelCheck Battery AdjInstall Mulcher Plate Check Deck LevelnessTo Convertto Bagging or Discharging Check for Proper Position of ALL BeltsH L I,,I Know Your Tractor HOW to USE Your Tractor To SET Parking BrakeTo Move Forward and Backward Ground DriveTo Adjust Gauge Wheels To Operate on HillsBefore Starting the Engine Towing Carts and Other ATTACH- MentsCheck Engine OIL Level ADD GasolineAutomatictransmissionwarmup Purge TransmissionMowing Tips Mulching Mowing TipsGeneral Recommendations Before Each USEBattery Operator Presence SystemBlade Removal To Sharpen BladeLubrication Transaxle Pump FluidBelts Clean AIR Screen Spark PlugsCleaning Protect painted surfaces with automotive Type waxService or Adjustments To Install MowerTractor To Remove MowerBelt Removal To Level Mower HousingSIDE-TO-SIDE Adjustment Belt Installation To Check and Adjust BrakeTo Adjust Brake To Check BrakeTransaxle Motion Control LE- VER Neutral Adjustment Transmission Removal ReplacementTo Adjust Steering Wheel Align Ment To Remove Wheel for RepairsReplacing Battery Interlocks and RelaysTo Replace Fuse To Remove Hood and Grill AS- SemblyTo Adjustthrottle Control Cable To Adjust CarburetorPreliminary Setting EngineFuel System BatteryTractor Troubleshooting Chart ProblemCause VibrationSlow OFFTractor - Model Number Schematic O111LACKTractor - Model Number Electrical KEY Part Description Tractor - Model Number 917.273763 Chassis and Enclosures Tractor --MODEL Number Chassis and Enclosures 212 Insert Lens ReflectiveTractor - Model Number Ground Drive Tractor -- Model Number Ground Drive 561Tractor - Model Number 917.273763 Steering Assembly Tractor - Model Number 917.273763 Steeringassembly Tractor - Model Number Engine KEY PartTractor - Model Number Seat Assembly Tractor - Model Number Decals Wheels & TiresTractor - Model Number Lift Assembly Tractor - Model Number Mower Deck KEY Part NO. no Description Zr- c Tractor Model Number Hydro Gear Transaxle - Model Number437 084 \WZI o1lo= ql 13o03 31oi 7,,9 Governor Crank Tractor - Model Number Label-EmissionsSuggested Guide for Sighting Slopes for Safe Operation 6E/ R

917.273763 specifications

The Craftsman 917.273763 is a powerful and versatile lawn mower designed to meet the needs of residential users seeking reliability and performance. This machine stands out in the crowded market of lawn care equipment due to its robust features, advanced technology, and user-friendly design.

One of the primary characteristics of the Craftsman 917.273763 is its efficient 25-horsepower engine. This powerful engine ensures that the mower can easily handle thick grass and challenging terrain, providing a clean and even cut every time. The mower's cutting deck measures 54 inches, which strikes a balance between maneuverability and efficiency. This size allows users to cover larger areas in less time, making it an excellent choice for homeowners with expansive lawns.

The cutting height is adjustable, enabling users to select from multiple cutting positions based on their lawn's needs. This flexibility not only promotes healthier grass growth but also accommodates different landscaping styles. The mower is equipped with a dual-blade system, which enhances grass cutting performance and helps to produce fine clippings that can be left on the lawn as natural mulch.

One of the standout technologies in the Craftsman 917.273763 is its electronic ignition system, which provides reliable starting performance every time. This innovation eliminates the guesswork often associated with traditional ignition systems and enhances overall ease of use. Additionally, the mower comes with a hydrostatic transmission, which offers smooth and effortless speed adjustments. Users can shift seamlessly from forward to reverse, a feature that greatly enhances maneuverability, especially in tight spaces.

Comfort is another key aspect of this mower's design. The operator's seat is cushioned and adjustable, allowing users to find their preferred position for prolonged mowing sessions. The steering wheel is ergonomically designed, and controls are within easy reach, making it user-friendly for individuals of all ages.

Safety features are also integral to the Craftsman 917.273763. It includes blade brake technology, ensuring that the mower's blades stop within seconds of releasing the drive lever. This feature significantly reduces the risk of accidents.

In summary, the Craftsman 917.273763 stands out due to its powerful engine, adjustable cutting capabilities, comfortable design, and advanced technologies. Whether managing a small yard or a larger property, this mower delivers the performance and reliability homeowners need for maintaining a pristine lawn.