Craftsman 917.27103 owner manual To SET Parking Brake, Stopping

Page 14

The operation of any tractor can result in foreign objects thrown into the eyes,which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustmentsor repairs.We recommend a wide vision safety mask over the spectacles,or standard safety glasses.

-lOW TO USE YOUR TRACTOR

'our tractor is equipped with an operator

)resence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the

parking brake will shut off the engine°

TO SET PARKING BRAKE

Depress clutch/brake pedal into full "BRAKE" position and hold.

Place parking brake lever in "EN- GAGED" position and release pressure from clutch/brake pedal. Pedal should remain in "BRAKE" position, Make sure parking brake will hold tractor secure.

Throttle/Choke

Attachment

Clutch

Lever "Engaged"

Control

Position

 

 

 

 

"Disengaged"

Position

Parking

Brake

Motion

Control

Clutch/Bra :.e "Disengaged" Lever

Pedal "Drive" Position

Position

STOPPING

MOWER BLADES -

Move attachment clutch lever to "DIS- ENGAGED" position.

GROUND DRIVE -

Depress clutch/brake pedal into full "BRAKE" position.

Move gearshift lever to neutral (N) posi- tion.

ENGINE -

°Move throttle control to slow position. NOTE; Failure to move throttle control to

slow position and allowing engine to idle before stopping may cause engine to "backfire".

° Turn ignition key to "OFF" position and

!4

remove key. Always remove key when leaving tractor to prevent unauthorized use.

o Never use choke to stop engine° NOTE= Under certain conditions when tractor is standing idle with the engine run- ning, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always stop engine when

,_pping tractor on grass areas. CAUTION, Always stop tractor com-

pletely, as described above, before leaving the operator's position; to empty grass catcher, etco

THROTTLE CONTROL

Always operate engine at full throttle,

Operating engine at less than full throt- tle reduces the battery charging rate.

°Ful! throttle offers the best bagging and

mower performance.

TO MOVE FORWARD AND BACKWARD The direction and speed of movement is controlled by the gearshift lever.

=Start tractor with clutch/brake pedal depressed and gearshift lever in neutral

(N)position_

Move gearshift lever to desired posi.- tion.

o Slowly release clutch/brake pedal to start movement.

IMPORTANT: Bring tractor to a complete stop before shifting or changing gears. Failure to do so will shorten the useful life

of your transaxle.

TO ADJUST MOWER CUTTING HEIGHT

The cutting height is controlled by turning the height adjustment knob in desired direction.

° Turn knob clockwise (G) to raise cutting height.

• Turn knob counterclockwise (O)to lower cutting height,

The cutting height range is approximately 1-I/2" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are ap- proximate and may vary depending upon soil conditions, height of grass and types of grass being mowe&

• The average lawn should be cut to

Image 14
Contents Lawn General Operation Limited TWO Year Warranty on Craftsman Riding EquipmentLimited 90 DAY Warranty on Battery Do not ServiceSlope Operation ChildrenTY is Involved Grass can hide obstaclesCustomer Responsibilities Product SpecificationsMaintenance Agreement #10 Seat Install Steering Wheel Tools Required for AssemblyAssemble Extension Shaft and Boot To Remove Tractor from Carton Unpack CartonInstall Seat HOW to SET UP Your TractorConnect Battery Check for Proper Position ALL Belts Install Mulcher PlateCheck Deck Levelness Check Brake SystemChecklist Assemble Gauge Wheels to Mower DeckKeep Area Clearslope Hazards Know Your Tractor To SET Parking Brake StoppingAttachments To Operate MowerTo Transport Before Starting the Engine Check Engine OIL LevelCold Weather Starting 50 F and below To Start EngineWarm WEATHERSTARTING50 F and Above Mowing TipsMulching Mowing Tips Important For best performance, keepBefore Each USE Customer Responsibilities MaintenanceChart Tires TractorBrake Operation Belts AIR FilterEngine OIL Filter To Service CartridgeClean AIR INTAKE/COOLING Areas MufflerTo Install Mower To Remove MowerTo Level Mower Housing To Replace Mower Blade DriveTo Adjust Steering Wheel Align Ment BeltinstallationTo Adjust Brake To Replace Motion Drive BeltTo Replace Headlight Bulb To Start Engine That has a Weak BatteryTo Remove Wheel FOR-REPAIRS Engine To Adjust Throttle ControlTo Adjust Carburetor CableEngine OIL EngineFuel System Chart Problem CauseProblem Cause Correction Underside of mower housCorrection Troubleshooting ChartProblem Tractor - Model Number SchematicATT-CLUTC 1o... i,, rr Electrical NO. NO.DESCRIPTIONTractor - Model Number Chassis and Enclosures Tractor - Model Number 917.271030 Chassis and Enclosures KEY Part NO. NO.DESCRIPTIONTractor -- Model Number Ground Drive Tractor -- Model Number Ground Drive KEY Part DescriptionTractor --MODEL Number Steering Assembly = =Tractor - Model Number Steering Assembly Optional Equipment EngineEngine KEY PartSeat Assembly KEYTRACTOR-- Model Number Decals KEY PartLiFT Assembly Tractor -- Model NumberLift Assembly Tractor - Model NumberTRACTOR--MODEL Number Mower Deck Mower Deck KEY Part NO. no DescriptionTractor - Model Number Dana Transaxle - Model Number Tractor -- Model Number Dana Transaxle - Model Number Part KEY DescriptionKcas Cylinder HEAD/VALVE!BREATHER KEY Part NO. NO.DESCRIPTION Crankcase KEY Part NO. NO.DESCRIPTIONTo2 Starting System Engine Controls KEY Part NO. NO.DESCRIPTION NO, noIll ill illlll Fuel System Crankshaft KEY Part Description ExhaustPage Page Page Suggested Guide for SaGHTING Slopes for Safe OPERATaON 800=366=PART

917.27103 specifications

The Craftsman 917.27103 is a robust lawn tractor designed to meet the needs of both residential and light commercial users. With a focus on performance, comfort, and durability, this machine stands out in the crowded market of lawn care equipment.

One of the key features of the Craftsman 917.27103 is its powerful engine. Equipped with a reliable 19.5 HP Briggs & Stratton engine, this lawn tractor delivers exceptional power and efficiency. The engine is designed for easy starting and maintenance, ensuring that users can get to work quickly without complications. Complementing this power is a hydrostatic transmission that provides seamless speed adjustments without the need for manual gear changes, allowing for smooth operation while navigating various terrains.

Another significant characteristic of the Craftsman 917.27103 is its cutting deck. Featuring a 42-inch cutting deck, this lawn tractor ensures a generous cutting width, allowing users to cover large areas more efficiently. The deck is adjustable, enabling four different cutting heights to accommodate various grass types and lawn conditions. The inclusion of a side discharge, mulching, and bagging capabilities provides added versatility, allowing users to choose their preferred method of grass disposal.

Comfort is also a primary consideration in the design of the Craftsman 917.27103. The tractor features an ergonomic seat with high back support, ensuring that users can work longer without discomfort. An easy-to-use dashboard with straightforward controls enables users to operate the tractor without confusion.

Durability is enhanced by the tractor's steel frame and robust construction, which can withstand the rigors of regular use. The wheels are designed with a deep tread pattern, providing excellent traction on various surfaces, whether it be wet grass, sandy soil, or sloping lawns.

In terms of technology, the Craftsman 917.27103 offers several innovative features. A maintenance-free battery adds convenience, while an integrated fuel gauge allows users to monitor fuel levels with ease. The compact design ensures that it fits into tight storage spaces, making it ideal for homeowners with limited garage areas.

Overall, the Craftsman 917.27103 is a versatile and dependable lawn tractor, combining power, comfort, and durability in a user-friendly package. Whether for residential gardening or light commercial landscaping tasks, it meets the demands of users looking to achieve a well-manicured lawn with ease.