Craftsman 917.27103 owner manual To Operate Mower, To Transport, Attachments

Page 15

approximately2-1/2 inches during the cool season and to over 3 inches during hot months. For healthierand better

looking lawns, mow often and after moderategrowth.

oFor best cutting performance,grass over 6 inches in heightshould be mowedtwice° Make the first cut rela-

tively high;the second to desired height.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch_ Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine,

o Select desired height of cut.

°Lower mower with attachment lift con- troL

- Start mower blades by engaging attach- ment clutch control.

• TO STOP MOWER BLADES - disen-

gage

attachment

clutch control

CAUTION: Do not operate the mower

without either the entire grass catcher, on

mowers so equipped, or the discharge

guard in place,guard in place.

 

Attachment Clutch

Attachment

Lift

Lever "Engaged"_4_-._

Lever High Position

positioo

 

 

"D sengaged'__t_

_

Low

Position

_

,¢ , :;_Position

 

__

I _,(/_D,scharge

TO OPERATE ON HILLS

_CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

°Choose the slowest speed before start- ing up or down hills.

°Avoid stopping or changing speed on hills.

°If slowing is necessary, move throttle control lever to slower position.

°If stopping is absolutely necessary, push clutch/brake pedal quickly to brake posi- tion and engage parking brake.

°Move gearshift lever to 1st gear, Be sure you have allowed room for tractor

to roll slightly as you restart movement. o To restart movement, slowly release

parking brake and clutch/brake pedal. o Make all turns slowly_

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control°

°When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

=Do not push or tow tractor at more than

five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc_),

TOWING CARTS AND OTHER

ATTACHMENTS

Tow only the attachments that are recom- mended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a toad, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor°

BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL

•The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

o Check engine oil with tractor on level ground.

°Unthread and remove oil fill cap/dip- stick; wipe oil off. Reinsert the dipstick into the tube and rest oil fill cap on the tube° Do not thread the cap onto the tube. Remove and read oil level. If nec- essary, add oil until "FULL" mark on dipstick is reache& Do not overfill.

°For cold weather operation you should change oil for easier starting (See "OIL VISCOSITY CHART" in the Customer

Responsibilities section of this manual).

•To change engine oil, see the Customer Responsibilities section in this manual,

ADD GASOLINE

°Fill fuel tank° Use fresh, clean, regular unleaded gasoline with a minimum of 87

octane. (Use of leaded gasoline wil! increase carbon and lead oxide

deposits and reduce valve tife). Do not mix oil with gasoline. Purchase fuel in

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Lawn Limited TWO Year Warranty on Craftsman Riding Equipment Limited 90 DAY Warranty on BatteryGeneral Operation Children ServiceSlope Operation Do notGrass can hide obstacles TY is InvolvedProduct Specifications Maintenance AgreementCustomer Responsibilities #10 Seat To Remove Tractor from Carton Unpack Carton Tools Required for AssemblyAssemble Extension Shaft and Boot Install Steering WheelHOW to SET UP Your Tractor Connect BatteryInstall Seat Check Brake System Install Mulcher PlateCheck Deck Levelness Check for Proper Position ALL BeltsAssemble Gauge Wheels to Mower Deck ChecklistKeep Area Clearslope Hazards Know Your Tractor Stopping To SET Parking BrakeBefore Starting the Engine Check Engine OIL Level To Operate MowerTo Transport AttachmentsMowing Tips To Start EngineWarm WEATHERSTARTING50 F and Above Cold Weather Starting 50 F and belowImportant For best performance, keep Mulching Mowing TipsCustomer Responsibilities Maintenance ChartBefore Each USE Tractor Brake OperationTires AIR Filter BeltsMuffler To Service CartridgeClean AIR INTAKE/COOLING Areas Engine OIL FilterTo Remove Mower To Install MowerTo Replace Mower Blade Drive To Level Mower HousingTo Replace Motion Drive Belt BeltinstallationTo Adjust Brake To Adjust Steering Wheel Align MentTo Start Engine That has a Weak Battery To Remove Wheel FOR-REPAIRSTo Replace Headlight Bulb Cable To Adjust Throttle ControlTo Adjust Carburetor EngineEngine Fuel SystemEngine OIL Problem Cause ChartUnderside of mower hous Problem Cause CorrectionTroubleshooting Chart ProblemCorrection Schematic ATT-CLUTCTractor - Model Number 1o... i,, rr NO. NO.DESCRIPTION ElectricalTractor - Model Number Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Tractor - Model Number 917.271030 Chassis and EnclosuresTractor -- Model Number Ground Drive KEY Part Description Tractor -- Model Number Ground Drive= = Tractor --MODEL Number Steering AssemblyTractor - Model Number Steering Assembly Engine Optional EquipmentKEY Part EngineKEY Seat AssemblyDecals KEY Part TRACTOR-- Model NumberTractor -- Model Number LiFT AssemblyTractor - Model Number Lift AssemblyTRACTOR--MODEL Number Mower Deck KEY Part NO. no Description Mower DeckTractor - Model Number Dana Transaxle - Model Number Part KEY Description Tractor -- Model Number Dana Transaxle - Model NumberKcas Crankcase KEY Part NO. NO.DESCRIPTION Cylinder HEAD/VALVE!BREATHER KEY Part NO. NO.DESCRIPTIONTo2 NO, no Starting System Engine Controls KEY Part NO. NO.DESCRIPTIONIll ill illlll Exhaust Fuel System Crankshaft KEY Part DescriptionPage Page Page Suggested Guide for SaGHTING Slopes for Safe OPERATaON 800=366=PART

917.27103 specifications

The Craftsman 917.27103 is a robust lawn tractor designed to meet the needs of both residential and light commercial users. With a focus on performance, comfort, and durability, this machine stands out in the crowded market of lawn care equipment.

One of the key features of the Craftsman 917.27103 is its powerful engine. Equipped with a reliable 19.5 HP Briggs & Stratton engine, this lawn tractor delivers exceptional power and efficiency. The engine is designed for easy starting and maintenance, ensuring that users can get to work quickly without complications. Complementing this power is a hydrostatic transmission that provides seamless speed adjustments without the need for manual gear changes, allowing for smooth operation while navigating various terrains.

Another significant characteristic of the Craftsman 917.27103 is its cutting deck. Featuring a 42-inch cutting deck, this lawn tractor ensures a generous cutting width, allowing users to cover large areas more efficiently. The deck is adjustable, enabling four different cutting heights to accommodate various grass types and lawn conditions. The inclusion of a side discharge, mulching, and bagging capabilities provides added versatility, allowing users to choose their preferred method of grass disposal.

Comfort is also a primary consideration in the design of the Craftsman 917.27103. The tractor features an ergonomic seat with high back support, ensuring that users can work longer without discomfort. An easy-to-use dashboard with straightforward controls enables users to operate the tractor without confusion.

Durability is enhanced by the tractor's steel frame and robust construction, which can withstand the rigors of regular use. The wheels are designed with a deep tread pattern, providing excellent traction on various surfaces, whether it be wet grass, sandy soil, or sloping lawns.

In terms of technology, the Craftsman 917.27103 offers several innovative features. A maintenance-free battery adds convenience, while an integrated fuel gauge allows users to monitor fuel levels with ease. The compact design ensures that it fits into tight storage spaces, making it ideal for homeowners with limited garage areas.

Overall, the Craftsman 917.27103 is a versatile and dependable lawn tractor, combining power, comfort, and durability in a user-friendly package. Whether for residential gardening or light commercial landscaping tasks, it meets the demands of users looking to achieve a well-manicured lawn with ease.
Top Page Image Contents