Craftsman 900.370520 manual To Install Grasscatcher, Release the rear door Grasscatcher

To Unfold Handle

Raise the handle section into place and secure by tightening the two knobs. See figure below.

WARNING: For your own safety DO NOT use this mower without either the Grasscatcher or Mulch Insert in operating position.

KnobsHandle

/

/

TO INSTALL GRASSCATCHER

GRASSCATCHER ASSEMBLY

•Slide the grassbag onto the grasscatcher frame. (See Fig. A)

•The grassbag has attachment clips sewn around the bag opening.

•Attach the two top clips to the frame, then attach the side clips, and lastly the bottom clip. (See Fig. B)

•Refer to "To Install Grasscatcher" instruc- tion before attaching to mower.

•Reach down between the mower handle and raise the rear door to a vertical posi- tion. (See Fig. A)

•Remove the mulch insert. See page 12 "To Remove Mulch Insert".

•Pick up the grasscatcher by the handle and lower the grasscatcher between the lawnmower handles. Position the grass-

.catcher hanger hooks on the metal rod under the rear door. (See Fig. B).

•Release the rear door.

WARNING: Never operate the mower unless the hanger hooks on the grass- catcher are seated properly, and the rear discharge door rests firmly against the top

of the grasscatcher.

6