Craftsman 316.2926 manual Using the Cord Retainer

Page 9

ASSEMBLY INSTRUCTIONS

Using the Cord Retainer

 

An extension cord retainer is suspended on the cord

 

guide bar found on the upper handle.

 

NOTE: Do not plug your extension cord into the power

 

source receptable (outlet) prior to routing it

 

through the cord retainer and connecting the

 

extension cord to the cultivator's cord outlet

 

receptacle.

 

To properly route your extension cord through the cord

 

retainer:

 

1. Approximately 14- to 16-inches from its end, crease

 

your extension cord to form a tight loop.

 

2. Push the loop through the bottom hole in the cord

 

retainer (Fig. 3).

 

3. Position the loop over the clip found on the cord

 

retainer and pull down until the cord fits snugly into

 

the clip (Fig. 4).

 

NOTE: Use a UL-approved extension cord. A 100-foot,

 

14-gauge cord is recommended. A 50-foot, 16-

 

gauge cord is acceptable. Refer to the small chart

 

found on Page 3.

Fig. 3

The cord retainer and the guide bar work together to

 

secure your extension cord and safely limit its movement.

 

The cord retainer (with the extension cord) will slide along

 

the guide bar as the cultivator is moved to the left or to

 

the right (Fig. 5).

 

Fig. 4

Fig. 5

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operator’s Manual Warranty Statement Table of ContentsRules for Safe Operation TrainingPreparation Operation Maintenance and Storage Symbol Meaning Safety and International SymbolsApplications Know Your CultivatorTools Needed for Assembly Assembly InstructionsRemoving Unit From Carton Loose Parts In CartonUsing the Cord Retainer Connecting to an Electrical Power Source Overload Protection SwitchSTARTING/STOPPING Instructions Starting InstructionsAdjusting the Wheel Support Bracket Using Your CultivatorOperating Instructions Maintenance and Repair Instructions Removing and Replacing TinesTips for Replacing Tines Troubleshooting SpecificationsU S E T I O N Parts List Description Sears Installation Service Repair Protection AgreementsMY-HOME Manual del operador Declaración DE Garantía ÍndicePrecaución Si no se Advertencia Si no seAdvertencia Al utilizar Advertencia Para reducirFuncionamiento AdvertenciaMantenimiento Y Almacenamiento Símbolos DE Seguridad E Internacionales Símbolo Significado Symbolo SignificadoAplicaciones Conozca SU CultivadoraAdvertencia Para Instrucciones DE MontajeMontaje DE LA Cultivadora Uso del retenedor del cable Instrucciones DE ARRANQUE/DETENCIÓN Advertencia arranquesInstrucciones DE Arranque Conexión a una fuente de alimentación eléctricaAdvertencia riesgo de Advertencia levante niInstrucciones DE Funcionamiento Ajuste DE LA Ménsula DE Soporte DE LA RuedaInstrucciones DE Mantenimiento Y Reparación Advertencia Para evitarExtracción y reemplazo de los dientes Consejos para volver a ubicar los dientesSolución DE Problemas EspecificacionesU S a C I Ó N Listado DE Piezas Artículo No. de pieza Descripción Get it fixed, at your home or ours

316.2926 specifications

The Craftsman 316.2926 is a versatile and powerful tool designed for both amateur DIY enthusiasts and professional craftsmen alike. This model is particularly recognized for its robust construction, efficiency, and a range of features that elevate its utility in various projects.

One of the standout features of the Craftsman 316.2926 is its 6.5-amp motor, which delivers consistent power and performance. This motor is designed to handle demanding tasks, making it suitable for cutting, sanding, and shaping a variety of materials including wood, plastic, and metal. The tool's variable speed control allows users to adjust the RPM according to the material being processed, ensuring precision and quality in every application.

An important characteristic of the Craftsman 316.2926 is its lightweight design, which enhances maneuverability while reducing user fatigue during extended use. The ergonomic grip not only provides comfort but also ensures a secure hold, adding to the tool’s safety profile. Its compact size allows for easier storage and transport, making it ideal for both home and job site use.

In terms of technology, the Craftsman 316.2926 features a quick-release blade system that facilitates rapid blade changes, ensuring minimal downtime during tasks. This feature is particularly beneficial for professionals who require efficiency and speed in their work. The tool is compatible with a wide range of blades, providing versatility for various cutting applications.

Another notable aspect of the Craftsman 316.2926 is its integrated dust blower, which helps to keep the workspace clear of debris. This not only promotes cleaner operation but also enhances visibility while working on projects, ensuring that users can maintain focus on their tasks without distractions.

The Craftsman brand is synonymous with reliability and durability, and the 316.2926 is no exception. Built with high-quality materials, this tool is designed to withstand the rigors of frequent use, making it an enduring investment for any tool collection.

In summary, the Craftsman 316.2926 is a powerful, lightweight, and feature-rich tool that caters to a wide range of cutting needs. With its variable speed control, quick-release blade system, and user-friendly design, it stands out as an essential addition to any craftsman’s toolkit, delivering both performance and efficiency for a variety of projects.
Top Page Image Contents