Tractor

Craftsman 917272261 owner manual Tractor

Always observe safety rules when performing any maintenance.

BRAK_ OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be ad- justed. (See "[0 ADJUST BRAKE" in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See "PRODUCT SPECIFICATIONS" section of this manual).

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp

objeu-'tsand other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant

may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure that operator presence and intedock systems are working properly. If

your tractor does not function as de- scribed below, repair the problem

immediately.

•The engine should not start unless the brake pedal is fully depressed and attachment clutchcontrol is in the disengaged position.

•When the engine is running, any

attempt by the operator to leave the seat withoutfirst setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never

operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be

kept sharp. Replace bent or damaged blades.

BLADE REMOVAL

1.Raise mower to highest position to allow access to blades.

2.Remove hex bolt, lock washer and flat washer securing blade.

3.Install new or resharpenod blade with trailing edge up towards deck as shown.

IMPORTANt': To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Reassemble hex bolt, lock washer and fiat washer in exact order as shown.

5.Tighten bolt securely (45-55 Ft. Lbs. torque).

TrailingEdgeUp _ _	Mandrel
_________Star_	Assembly
Flat Washer _-_._	Center
Lock__	I_lo'e
Washer ./"_	Blade

--(Grade 8)"

*A Grade 8 heattreatedboltcan be identifiedby six linesonthe boff head.

IMPORTANT: Blade bolt is grade 8 heat treated.

TO SHARPEN BLADE

NOTE: We do rot recommend sharpen-

ing blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and eventual

damage to mower and engine.

•The blade can be sharpened with a file

or on a gdnding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/6" diameter steel bolt, pin, or a cone

balancer. (When using a cone bal- ancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen

the heavy end until the blade is balanced.

B,ade

or Pin

917272261 specifications

The Craftsman 917272261 is a powerful and versatile lawn tractor designed for homeowners who want to maintain their lawns efficiently and effortlessly. This riding mower boasts a variety of features that make it an excellent choice for tackling different yard sizes and types. Its robust build and innovative technologies ensure a reliable performance every time.

One of the main features of the Craftsman 917272261 is its 19 HP Briggs & Stratton engine. This reliable engine provides the necessary power to handle even the toughest mowing tasks, allowing users to navigate through thick grass and uneven terrain with ease. The engine is also designed for fuel efficiency, helping homeowners save on fuel costs while still getting the job done effectively.

The 42-inch cutting deck is another standout feature of the Craftsman 917272261. This wide cutting width allows for efficient mowing, reducing the number of passes required to cover the entire lawn. The cutting deck is also equipped with adjustable heights, offering seven different positions that allow users to customize the height of their grass cut. This feature helps to create a neat and healthy lawn, accommodating various grass types and preferences.

Technologies integrated into the Craftsman 917272261 ensure a smooth and easy operation. The manual transmission system allows users to choose their speed, providing a tailored mowing experience. Additionally, the inching pedal enables gentle speed control, allowing for precise maneuvering around corners and obstacles.

For added convenience, the Craftsman 917272261 includes a comfortable and spacious operator's seat, designed to reduce fatigue during long mowing sessions. The tractor is also equipped with a reinforced frame, making it durable enough to withstand the rigors of regular use.

Several accessories can enhance the functionality of the Craftsman 917272261. Optional attachments such as baggers, mulching kits, and snow blades turn this versatile lawn tractor into an all-season tool, making it capable of tackling a variety of outdoor chores.

In conclusion, the Craftsman 917272261 is a reliable, feature-rich lawn tractor that combines power, efficiency, and user-friendly technologies. Its strong engine, adjustable cutting deck, and comfort-oriented design make it an excellent investment for any homeowner looking to maintain a pristine lawn all year round.