Grass Catcher, To Change Engine OIL | Craftsman 917.38841 specification

TO SHARPEN BLADE

NOTE: We do not recommend

sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will

cause eventual damage to lawn mower or engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, drive a nail into a beam or wall. Leave about one

inch of the straight nail exposed. Place center hole of blade over the head of

the nail. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward,

sharpen the heavy end until the blade is balanced.

Crank shaft

Bladekeyway

Bolt		Crank
Lockwasher	Hardened	Blade shaft
	washer	Trailing adapter
		edge

GRASS CATCHER

•The grass catcher may be hosed with water, but must be dry when used.

•Check your grass catcher often for damage or deterioration. Through normal use it will wear. If catcher needs replacing, rep_ce only with a manufacturer approved replacement catcher. Give the lawn mower model number when ordering.

ENGINE

LUBRICATION

Use only high quality detergent oil rated with API service classification SF, SH or SG. Select the oil'sSAE viscosity grade according to your expected operating

.=o +

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

NOTE: Although multi--viscosity oils (5W30, 10W30 etc.) improve starting in

cold weather, these multi--viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid

possible engine damage from running low on oil.

Change the oil after every 25 hours of

operation or at least once a year if the lawn mower is not used for 25 hours in

one year.

Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil plug securely each time you check the oil level.

TO CHANGE ENGINE OIL

NOTE: Before tipping lawn mower to drain oil, drain fuel tank by running engine until fuel tank is empty.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug.

•Remove engine oil cap; lay aside on a clean surface.

•Tip lawn mower on its side and drain oil into a suitable container. Rock lawn mower back and forth to remove any oil trapped inside of engine.

•Wipe off any spilled oil on lawn mower and on side of engine.

•Fill engine with oil. Fill only to the

"FULL" line on the dipstick. DO NOT OVER FILL.

•Replace engine oil cap.

•Reconnect spark plug wire to spark plug.

Container

AIR FILTER

Your engine will not run properly and may be damaged by using a dirty air filter. Replace the air filter every year, more

often if you mow in very dusty, dirty conditions. Do not wash air filter.

TO CHANGE AIR FILTER

•Remove the air filter by turning clock- wise to the stop and pull away from collar.

•Remove filter from inside of cover.

•Clean the inside of the cover and the

12 collar to remove any dirt accumulation.

917.38841 specifications

The Craftsman 917.38841 is a robust lawn mower that has garnered attention for its efficiency, versatility, and user-friendly features. Designed for homeowners seeking a reliable solution for maintaining their lawns, this model balances power and comfort while achieving outstanding cutting results.

One of the standout features of the Craftsman 917.38841 is its powerful engine. Equipped with a dependable 15.5 HP Briggs & Stratton engine, it provides ample power, allowing the mower to handle tough grass and uneven terrains with ease. This ensures that your mowing tasks are completed quickly and without unnecessary stress on the machinery.

The mower incorporates a 42-inch cutting deck, which allows for wider mowing coverage in a single pass. This deck size is ideal for medium to large yards, enabling users to save time without compromising on cut quality. The cutting height can be easily adjusted to six different positions, ranging from 1.5 to 4 inches, which gives users the flexibility to suit their lawn’s specific needs throughout the mowing season.

Another key characteristic of the Craftsman 917.38841 is its ease of use. The mower features an ergonomic seat and steering wheel, allowing for comfortable navigation during extended mowing sessions. Additionally, its automatic transmission offers seamless speed control, which allows users to easily adjust their pace according to the mowing conditions.

The inclusion of six different-speed settings provides the user with enhanced control over the mowing speed, making it easier to navigate around obstacles and flower beds while ensuring an even cut. Moreover, the model features a tight turning radius, enhancing maneuverability in tight spaces.

To further ensure durability and performance, the Craftsman 917.38841 has a sturdy, reinforced frame. This durability not only contributes to the mower's longevity but also ensures it can withstand the rigors of regular use in various yard conditions.

Maintenance is straightforward with this mower, thanks to its accessible features. The design allows for easy access to the engine and the cutting deck, making routine maintenance tasks simple.

In summary, the Craftsman 917.38841 combines power, efficiency, and user-centered design. With its reliable engine, extensive cutting options, and user-friendly features, it stands out as an excellent choice for homeowners looking to maintain a pristine lawn with ease and efficiency. Whether you're navigating tight corners or tackling thick grass, this mower is engineered to deliver exceptional performance consistently.