Craftsman 917.38841 Engine Zone Control, To Convert Mower, Rear Bagging, Side Discharging

Page 7

The operation of any lawn mower can result in foreign objects thrown nto the eyes, which can result in

severe eye damage. Always wear safety glasses Or eye shields while operating your lawn mower or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOWTO USEYOUR LAWN MOWER

ENGINE SPEED CONTROL

The engine speed was set at the factory for

optimum performance. Speed is not adjust- able.

ENGINE ZONE CONTROL

_CAUTION: Federal regulations require an engine control to be installed on this lawn mower in order to minimize the risk of blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running.

-Your lawn mower is equipped with an operator presence control bar which

requires the operator to be positioned behind the lawn mower handle to start and

operate the lawn mower.

TO ADJUST CUTrlNG HEIGHT

•Raise wheels for low cut and lower wheels for high cut.

•Adjust cutting height to suit your require-

ments. Medium position is best for most lawns.

•To change cutting height, squeeze adjuster lever toward wheel. Move wheel up or down to suit your requirements. Be sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever.

Also, 9-position adjusters (if so equipped) allow lever to be positioned between the plate tabs.

Lower Wheels for High Cut

Plate Tab

REAR BAGGING

•Lift rear door of the lawn mower and place the grass catcher frame hooks onto the door pivot pins.

•To convert to mulching or discharging operation, remove grass catcher and close rear door.

Pivot pins

SIDE DISCHARGING

•Rear door must be closed.

•Open mulcher door and install discharge deflector under guard as shown.

•Mower is now ready for discharging operation.

•To convert to mulching or bagging

operation, discharge deflector must be removed and mulcher door must be

closed.

SIMPLE STEPS TO REMEMBER WHEN CONVERTING YOUR LAWN MOWER

FOR MULCHING -

•Rear door closed.

•Mulcherdoor closed.

FOR REAR BAGGING -

•Grass catcherinstalled.

•Mulcherdoorclosed.

FOR SIDE DISCHARGING -

•Rear door closed.

•Side dischargedeflectorinstalled.

_CAUTION: Do not run your lawn mower without rear door closed or

approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or prepped open,

J

Lever

 

Raise Wheels for Low Cut

 

 

TO CONVERT MOWER

 

Mulcher

 

 

Your lawn mower was shipped

ready to be

door

used as a mulcher. To convert to bagging or

 

discharging:

 

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Riiftxmiin Training Limited TWO Year Warranty on Craftsman Power MowerBack Cover SEARS, Roebuckand CO., D/817 WA, Hoffman ESTATES, IllinoisALook for this symbol to point out Maintenance and StorageOperation Lawn Mower MAINTENANCl Lawn Mower PerformanceTo Remove Lawn Mower from Carton To Unfold Handle To Install AttachmentsKnow Your lAWN Mower Rear Bagging Engine Zone ControlTo Convert Mower Howto Useyour Lawn Mower Engine Speed ControlAddgasoune Before Starting Engine OILTo Start Engine Mulching Mowing Tips MowingtipsBefore Each USE Maintenance ScheduleLubrication Chart General RecommendationsSolid State Ignition AIR GAP OIL CapacityChampion RJ19LM Or J19LM Valve Clearance Intake ExhaustAIR Filter Grass CatcherTo Change Engine OIL To Sharpen BladeMuffler Lawn Mower To Adjust Cutting HeightCleaning SparkplugEngine Speed EngineTo Assemble Grass Catcher CarburetorCylinder Troubleshooting ChartProblem Cause Correction Engine OILTroubleshooting Chart Problem Cause Page Craftsman Rotary Lawn Mower --MODEL no KEY Part NO. NO.DESCRIPTION Craftsman Rotary Lawn MOWER-- Model no245 Craftsman Cycle Engine Model 36A 632766 Carburetor Tube Model no Craftsman 4-CYCLE Engine174409 03.09.00 VB Printedin U.S.A

917.38841 specifications

The Craftsman 917.38841 is a robust lawn mower that has garnered attention for its efficiency, versatility, and user-friendly features. Designed for homeowners seeking a reliable solution for maintaining their lawns, this model balances power and comfort while achieving outstanding cutting results.

One of the standout features of the Craftsman 917.38841 is its powerful engine. Equipped with a dependable 15.5 HP Briggs & Stratton engine, it provides ample power, allowing the mower to handle tough grass and uneven terrains with ease. This ensures that your mowing tasks are completed quickly and without unnecessary stress on the machinery.

The mower incorporates a 42-inch cutting deck, which allows for wider mowing coverage in a single pass. This deck size is ideal for medium to large yards, enabling users to save time without compromising on cut quality. The cutting height can be easily adjusted to six different positions, ranging from 1.5 to 4 inches, which gives users the flexibility to suit their lawn’s specific needs throughout the mowing season.

Another key characteristic of the Craftsman 917.38841 is its ease of use. The mower features an ergonomic seat and steering wheel, allowing for comfortable navigation during extended mowing sessions. Additionally, its automatic transmission offers seamless speed control, which allows users to easily adjust their pace according to the mowing conditions.

The inclusion of six different-speed settings provides the user with enhanced control over the mowing speed, making it easier to navigate around obstacles and flower beds while ensuring an even cut. Moreover, the model features a tight turning radius, enhancing maneuverability in tight spaces.

To further ensure durability and performance, the Craftsman 917.38841 has a sturdy, reinforced frame. This durability not only contributes to the mower's longevity but also ensures it can withstand the rigors of regular use in various yard conditions.

Maintenance is straightforward with this mower, thanks to its accessible features. The design allows for easy access to the engine and the cutting deck, making routine maintenance tasks simple.

In summary, the Craftsman 917.38841 combines power, efficiency, and user-centered design. With its reliable engine, extensive cutting options, and user-friendly features, it stands out as an excellent choice for homeowners looking to maintain a pristine lawn with ease and efficiency. Whether you're navigating tight corners or tackling thick grass, this mower is engineered to deliver exceptional performance consistently.
Top Page Image Contents