Parasound 2100 manual Other Connections

Page 11

CONNECTING YOUR MODEL 2100 continued

11

Record Out Jacks

The Record Out jacks connect to your analog audio recorder’s record/input jacks. When you select an Input 1–6 or MP3, the signal from the corresponding source component is available at the Record Out jacks whenever the Model 2100 is turned on. It is a fixed level signal that is unaffected by volume, balance and tone settings or audio mute.

Note: When you select the Bypass Input, there is no signal available at the Record Out jacks. The Model 2100 does not enable monitoring the quality of a recording as you are making it.

Connecting a Signal Processor to Your Model 2100

You can connect a signal processor such as an electronic crossover or equalizer between the Model 2100 and your power amplifier(s). The signal processor’s input should be rated to accept the Model 2100’s maximum output voltage

without overloading. You can also adjust the gain controls of your power amplifier(s) and signal processor for the lowest noise level.

OTHER CONNECTIONS

The headphone jack accepts a 1/8” (3.5 mm) mini plug. The Main audio out is muted when the headphone plug inserts into this jack, but the output to the Fixed–Rec jacks remains live.

Note: Please lower the volume level on the Model 2100 before unplugging your headphones to avoid an unexpected loud blast of sound that could damage your speakers.

TRIGGERING OTHER COMPONENTS ON/OFF

12V Trigger Out

There is one 12 volt trigger output and one input. The output can be used to turn on power amplifiers and other equipment that are equipped with automatic turn-on inputs. Connect the Model 2100’s 12V output jack to the triggered component’s trigger input jack using the provided trigger wire with the 2.5 mm sub-mini plugs.

Note: Most Parasound Power Amplifiers are equipped with a 2.5

mm“sub-mini” 12V trigger input jack. The trigger voltage source is DC and the trigger plug tip is + (positive) and its sleeve – (negative). The trigger output has a maximum current capacity of 150 mA. Parasound power amplifier trigger inputs require a mere 15 mA.

AUTO TURN ON

12V Trigger In

The 12V trigger input can be used to turn the Model 2100 power on automatically. In this case the Model 2100 would be turned on and off by another device such as a home automation system.

Note: When the Auto Turn On switch is set to 12V or AC the front panel Power button and remote control On and Off buttons are disabled.

AC Power Trigger

The Model 2100 will turn on automatically when its AC power source is switched on. To use AC auto turn on first set the Auto Turn On switch to its AC position.

Note: When the Auto Turn On switch is set to 12V or AC the front panel Power button and remote control On and Off buttons are disabled.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Important Safety Instructions You Should Know IntroductionThank You for Choosing Parasound Keeping Records for Future ReferenceTable of Contents Ventilation Requirements Placement GuidelinesUnpacking Your Model Rack Mounting Your Parasound Model Making Connections Connecting Your ModelAudio Input Connections Bypass Input Pass Through-in a surround sound system Connecting the Bypass InputFront Panel MP3 Input Bypass Input Pass Through-stereo system onlySelecting the Bypass Input How to improve stereo sound in a surround sound systemAudio Output Connections Other Connections RS-232 Serial Port AC PowerExternal Remote Input Front Panel Controls Operating Your ModelBURNING-IN Your Model Remote Control FunctionsMaintaining Your Model Frequently Asked QuestionsAre YOU Having DIFFICULTY? Warranty RepairBefore You Return Any Unit to Parasound for Service Protocol Specs Pin Connections Command String Ascii String HexadecimalRS-232 Protocol & Code Table Basic RS-232 ControlRequest String Ascii String Hexadecimal Response From Volume Feedback *V0CR and *V1CRFeedback Information G1 S3 M1 T0CRTHD Distortion General Information DimensionsOutput Impedance Rack Mount Accessory Frequency Response

2100 specifications

The Parasound 2100 is a high-quality analog stereo preamplifier that has garnered attention in the audiophile community for its exceptional performance and robust build. Known for its impeccable sonic characteristics, the 2100 is designed to deliver a pure audio experience, making it a top choice for music enthusiasts.

One of the main features of the Parasound 2100 is its dual-monaural construction, which ensures that the left and right channels operate independently. This design minimizes crosstalk and enhances stereo imaging, resulting in a more immersive listening experience. The preamp is equipped with high-quality components, including precision resistors and capacitors, contributing to its overall sound quality and reliability.

The Parasound 2100 offers a range of input options, including multiple line-level inputs, a phono input for connecting turntables, and a dedicated input for high-level sources. This versatility allows users to connect various audio sources seamlessly, making it suitable for both modern and vintage audio setups. The phono stage is particularly noteworthy, as it is designed to handle both moving magnet and moving coil cartridges, providing flexibility for vinyl enthusiasts.

In terms of technology, the Parasound 2100 utilizes an advanced signal path designed to minimize distortion and noise. The preamp features a signal-to-noise ratio that is both impressive and competitive in its class, ensuring that even the most subtle details in a music track are faithfully reproduced. Additionally, the unit includes a remote control for added convenience in adjusting volume levels and switching inputs from a distance.

Another characteristic that sets the Parasound 2100 apart is its exceptional build quality. The preamplifier is housed in a solid chassis, designed to minimize vibrations and interference, which can affect audio performance. Its sleek, professional appearance is complemented by a user-friendly front panel layout, making it easy to navigate and operate.

Overall, the Parasound 2100 is a standout option in the realm of high-fidelity audio. With its advanced features, versatile connectivity, and quality construction, it caters to both novice audiophiles and seasoned enthusiasts. Whether used in a dedicated stereo system or as part of a more complex home theater setup, the Parasound 2100 delivers the clarity and depth that discerning listeners desire, making it a worthy investment for those seeking superior audio reproduction.
Top Page Image Contents