Parasound 2100 manual Frequently Asked Questions, Maintaining Your Model

Page 15

FREQUENTLY ASKED QUESTIONS

15

Before turning the Model 2100 on, recheck all your connections and turn down the volume control to avoid any unpleasant “blasts” of sound that could damage your speakers.

Why is there no sound from the speakers?

•Is the AC power live? You should see a faint red glow around the Power button when the unit is turned off, but plugged into a live AC power source.

•Check that input and output cables are secure at both ends.

•Make sure your Model 2100 is switched to the correct input.

What could cause the remote to fail to operate?

•Weak or dead batteries. Replace; information about battery recycling: www.Earth911.org.

•Insure that the front panel IR receiver is not obscured or exposed to direct sunlight or to an LCD or a plasma TV screen.

I can hear a background hum from the speakers

•Move audio cables and AC cords away from each other (while power is off).

•Try to route audio cables and AC cords perpendicular to each other (while power is off).

•Make sure insulating shoulder washers are used if unit is rack mounted.

•Reverse the direction of the other components’ AC plugs, one-by-one (while power is off).

•Insure that the power amps and the Model 2100 are plugged into the same AC outlet.

•The turntable ground wire must be attached to the GND terminal.

The Sound is distorted and weak

•Make sure the gain of the power amp is not set too low.

•Are you trying to use the Model 2100 with a turntable? Make sure you have set the phono selector switch to the correct cartridge type.

•Make sure the stereo power amp’s stereo/mono switch is set to stereo.

MAINTAINING YOUR MODEL 2100

Your Model 2100 requires no periodic maintenance and has no user-serviceable parts inside.

To avoid risk of electric shock do not remove the top cover. To keep it clean use only a soft cloth moistened with a few drops of clear water or Windex. Never use any solvents or abrasives. The remote control handset batteries should be removed whenever it will be unused for an extended period. Remove the battery cover annually to inspect and remove leaking batteries.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Page Important Safety Instructions You Should Know IntroductionThank You for Choosing Parasound Keeping Records for Future ReferenceTable of Contents Placement Guidelines Unpacking Your ModelVentilation Requirements Rack Mounting Your Parasound Model Connecting Your Model Audio Input ConnectionsMaking Connections Bypass Input Pass Through-in a surround sound system Connecting the Bypass InputFront Panel MP3 Input Bypass Input Pass Through-stereo system onlySelecting the Bypass Input How to improve stereo sound in a surround sound systemAudio Output Connections Other Connections AC Power External Remote InputRS-232 Serial Port Front Panel Controls Operating Your ModelBURNING-IN Your Model Remote Control FunctionsMaintaining Your Model Frequently Asked QuestionsWarranty Repair Before You Return Any Unit to Parasound for ServiceAre YOU Having DIFFICULTY? Protocol Specs Pin Connections Command String Ascii String HexadecimalRS-232 Protocol & Code Table Basic RS-232 ControlRequest String Ascii String Hexadecimal Response From Volume Feedback *V0CR and *V1CRFeedback Information G1 S3 M1 T0CRTHD Distortion General Information DimensionsOutput Impedance Rack Mount Accessory Frequency Response

2100 specifications

The Parasound 2100 is a high-quality analog stereo preamplifier that has garnered attention in the audiophile community for its exceptional performance and robust build. Known for its impeccable sonic characteristics, the 2100 is designed to deliver a pure audio experience, making it a top choice for music enthusiasts.

One of the main features of the Parasound 2100 is its dual-monaural construction, which ensures that the left and right channels operate independently. This design minimizes crosstalk and enhances stereo imaging, resulting in a more immersive listening experience. The preamp is equipped with high-quality components, including precision resistors and capacitors, contributing to its overall sound quality and reliability.

The Parasound 2100 offers a range of input options, including multiple line-level inputs, a phono input for connecting turntables, and a dedicated input for high-level sources. This versatility allows users to connect various audio sources seamlessly, making it suitable for both modern and vintage audio setups. The phono stage is particularly noteworthy, as it is designed to handle both moving magnet and moving coil cartridges, providing flexibility for vinyl enthusiasts.

In terms of technology, the Parasound 2100 utilizes an advanced signal path designed to minimize distortion and noise. The preamp features a signal-to-noise ratio that is both impressive and competitive in its class, ensuring that even the most subtle details in a music track are faithfully reproduced. Additionally, the unit includes a remote control for added convenience in adjusting volume levels and switching inputs from a distance.

Another characteristic that sets the Parasound 2100 apart is its exceptional build quality. The preamplifier is housed in a solid chassis, designed to minimize vibrations and interference, which can affect audio performance. Its sleek, professional appearance is complemented by a user-friendly front panel layout, making it easy to navigate and operate.

Overall, the Parasound 2100 is a standout option in the realm of high-fidelity audio. With its advanced features, versatile connectivity, and quality construction, it caters to both novice audiophiles and seasoned enthusiasts. Whether used in a dedicated stereo system or as part of a more complex home theater setup, the Parasound 2100 delivers the clarity and depth that discerning listeners desire, making it a worthy investment for those seeking superior audio reproduction.
Top Page Image Contents