Parasound 2100 manual Frequency Response, THD Distortion, Ratio, Crosstalk, Input Impedance

Page 19

MODEL 2100 SPECIFICATIONS AND SETUP NOTES

19

Audio Specifications

AC Power Requirement

 

Frequency Response

110-250 V, 50 - 60 Hz

Voltage is automatically selected

10 Hz – 100 kHz, +0/–3 dB

5 watts standby; 10 watts when turned on

 

THD Distortion

< 0.008% at 20 Hz

S/N Ratio

>105 dB, input shorted, IHF A-weighted

>95 dB, input shorted, unweighted

Crosstalk

> 75 dB at 20 kHz

Input Impedance

30k ohms

General Information

Dimensions

Width: 17.25” (437 mm)

Depth: 14.5” (369 mm)

Height, with feet: 4.25” (108 mm)

Height, without feet: 3.5” (89 mm)

Weight: Net: 13 lbs. (5.9 kg)

Shipping: 20 lbs. (9.1 kg)

Output Impedance

Rack Mount Accessory

RMK22 (May be purchased separately)

 

< 60 ohms

 

Input Sensitivity

 

250 mV for 1 V output

 

Total Gain: 12 db

 

Maximum Output: 6.5 V

 

Notes:

Note: Specifications and features subject to change or improvement without notice.

© 2007 Parasound Products, Inc. Crestron, AMX, Control4, Niles and Elan are registered trademarks.

Rev. 0.9

Image 19
Contents Page Important Safety Instructions You Should Know IntroductionThank You for Choosing Parasound Keeping Records for Future ReferenceTable of Contents Unpacking Your Model Placement GuidelinesVentilation Requirements Rack Mounting Your Parasound Model Audio Input Connections Connecting Your ModelMaking Connections Bypass Input Pass Through-in a surround sound system Connecting the Bypass InputFront Panel MP3 Input Bypass Input Pass Through-stereo system onlySelecting the Bypass Input How to improve stereo sound in a surround sound systemAudio Output Connections Other Connections External Remote Input AC PowerRS-232 Serial Port Front Panel Controls Operating Your ModelBURNING-IN Your Model Remote Control FunctionsMaintaining Your Model Frequently Asked QuestionsBefore You Return Any Unit to Parasound for Service Warranty RepairAre YOU Having DIFFICULTY? Protocol Specs Pin Connections Command String Ascii String HexadecimalRS-232 Protocol & Code Table Basic RS-232 ControlRequest String Ascii String Hexadecimal Response From Volume Feedback *V0CR and *V1CRFeedback Information G1 S3 M1 T0CRTHD Distortion General Information DimensionsOutput Impedance Rack Mount Accessory Frequency Response

2100 specifications

The Parasound 2100 is a high-quality analog stereo preamplifier that has garnered attention in the audiophile community for its exceptional performance and robust build. Known for its impeccable sonic characteristics, the 2100 is designed to deliver a pure audio experience, making it a top choice for music enthusiasts.

One of the main features of the Parasound 2100 is its dual-monaural construction, which ensures that the left and right channels operate independently. This design minimizes crosstalk and enhances stereo imaging, resulting in a more immersive listening experience. The preamp is equipped with high-quality components, including precision resistors and capacitors, contributing to its overall sound quality and reliability.

The Parasound 2100 offers a range of input options, including multiple line-level inputs, a phono input for connecting turntables, and a dedicated input for high-level sources. This versatility allows users to connect various audio sources seamlessly, making it suitable for both modern and vintage audio setups. The phono stage is particularly noteworthy, as it is designed to handle both moving magnet and moving coil cartridges, providing flexibility for vinyl enthusiasts.

In terms of technology, the Parasound 2100 utilizes an advanced signal path designed to minimize distortion and noise. The preamp features a signal-to-noise ratio that is both impressive and competitive in its class, ensuring that even the most subtle details in a music track are faithfully reproduced. Additionally, the unit includes a remote control for added convenience in adjusting volume levels and switching inputs from a distance.

Another characteristic that sets the Parasound 2100 apart is its exceptional build quality. The preamplifier is housed in a solid chassis, designed to minimize vibrations and interference, which can affect audio performance. Its sleek, professional appearance is complemented by a user-friendly front panel layout, making it easy to navigate and operate.

Overall, the Parasound 2100 is a standout option in the realm of high-fidelity audio. With its advanced features, versatile connectivity, and quality construction, it caters to both novice audiophiles and seasoned enthusiasts. Whether used in a dedicated stereo system or as part of a more complex home theater setup, the Parasound 2100 delivers the clarity and depth that discerning listeners desire, making it a worthy investment for those seeking superior audio reproduction.