Craftsman 917.37841 owner manual IL Capacity, Lawn Mower, Tires, Blade Care, To Remove Blade

Page 11

PRODUCT SPECIFICATIONS

 

ERIALNUMBER

 

DATE OF PURCHASE

 

_ASOLINE CAPACITY/TYPE:

1.5 QUARTS

 

UNLEADED REGULAR

DILTYPE (API-SF-SJ):

SAE 30 (ABOVE 32°F)

 

SAE 5W-30 (BELOW 32°F)

)IL CAPACITY:

20 OZS.

SPARK PLUG (GAP: .045")

CHAMPION RESISTOR TYPE RJ19LM4

BLADE BOLT TORQUE:

35-40 FT. LBS.

The model and serial numbem will be found on a decal attached to the rear of the lawn mower housing.Record both serial number and date of purchase in space provided above.

LAWN MOWER

Always observe safety rules when performing any maintenance.

TIRES

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

BLADE CARE

For best results, mower blade must be kept sharp. Replace bent or damaged blades.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and

mower housing to prevent blade from turning when removing blade bolt.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade and attaching hard- ware (bolt, lock washer and hardened washer).

NOTE: Remove the blade adapter and check the key inside hub of blade

adapter. The key must be in good condi- tion to work properly. Replace adapter if damaged.

TO REPLACE BLADE

1.Position the blade adapter on the engine crankshaft. Be sure key in adapter and crankshaft keyway are aligned.

2.Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter.

3.Be sure the trailing edge of blade (opposite sharp edge) is up toward the engine.

4.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

5.Use block of wood between blade and lawn mower housing and tighten the

blade bolt, turning clockwise.

•The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is grade 8 heat treated.

TO SHARPEN BLADE

NOTE: We do not recommend sharpen- ing blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will

cause eventual damage to lawn mower or engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, drive a nail into a beam or wall. Leave about one inch of the straight nail exposed. Place center hole of blade over the head of the nail. If blade is balanced, it should

remain in a horizontal position. If either end of the blade moves downward,

sharpen the heavy end until the blade is balanced.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents CRAFT.TMAWI General Operation II1. Children IV. ServiceII. Slope Operation Lawn Mower Performance Lawn Mower MaintenanceCancer and birth defects or other reproductive harm To Remove Lawn Mower from Carton Howto SET Upyour Lawn Mower To Unfold HandleKnowyour Lawn Mower Meets Cpsc Safety RequirementsRear Bagging Howto Useyour Lawn Mower Engine SpeedEngine Zone Control To Convert MowerTo Start Engine Drive ControlBefore Starting Engine ADD OIL ADD GasolineMulching Mowingtips This will help engine air flow and extend engine lifeBefore Each USE Maintenance ScheduleCation Chart Lubrication Chart General RecommendationsBlade Care IL CapacityLawn Mower TiresGear Case Engine LubricationGrass Catcher Drive WheelsAIR Filter CleaningClean Under Drive Cover Lawn Mower To Adjust Cutting HeightCarburetor To Adjust HandleTo Assemble Grass Catcher Engine Engine SpeedOther Engine Fuel SystemEngine OIL CylinderTroubleshooting Chart Problemcause Troubleshooting Chart Problem Cause Correction Rotary Lawn MOWER- Model no Gear Case Assembly Part Number ROTARYLAWNMOWER- Model Number Rotary Lawn MOWER- Model Number Rotary Lawn Mower - Model Number KEY Part Description Craftsman 4-CYCLE Engine Model Fitting Model NO, 143,016708 LE-FOYER 8OO-4-MY-HOME sMnytime,dayo,night

917.37841 specifications

The Craftsman 917.37841 is a versatile and robust riding lawn mower designed to make lawn care more efficient and enjoyable. With an emphasis on user-friendly features and powerful performance, this model caters to homeowners seeking a reliable machine for maintaining their lawns and gardens.

One of the standout features of the Craftsman 917.37841 is its 42-inch cutting deck. This wide deck allows for a more extensive cutting path, helping users complete their mowing tasks in less time. The multiple cutting height settings, ranging from 1.5 inches to 4 inches, provide versatility to manage different grass types and terrains effectively.

Equipped with a 19 HP Briggs & Stratton engine, the Craftsman 917.37841 delivers reliable power, making it well-suited for various lawn conditions. This engine is known for its durability and ease of maintenance, ensuring that users can count on it for years to come. The hydrostatic transmission enhances the driving experience, allowing for smooth acceleration and easy maneuverability without the need for constant gear shifting.

The Craftsman 917.37841 also features an ergonomic and comfortable seating area, which is essential for longer mowing sessions. The adjustable seat allows users to find their preferred position easily, while the easy-to-reach controls enhance the overall user experience.

One of the key technologies incorporated into this riding mower is the "Yard Command" technology, which integrates advanced features for improved efficiency. This technology can include easy-to-read gauges that provide real-time data on fuel levels and battery status, allowing users to manage their mowing sessions effectively.

Additionally, the Craftsman 917.37841 promotes ease of maintenance with a removable deck for cleaning and servicing. The built-in deck wash system simplifies the cleaning process, helping to prolong the mower's life and maintain its performance.

Overall, the Craftsman 917.37841 combines functionality, comfort, and cutting-edge technology to offer a comprehensive lawn care solution. Whether tackling expansive lawns or navigating tight spaces, this riding mower stands out as a dependable choice for homeowners looking to enhance their outdoor maintenance efforts.
Top Page Image Contents