Craftsman 917.37841 AIR Filter, Spark Plug, Cleaning, Clean Under Drive Cover, Muffler

Page 13

AIR FILTER

Your engine will not run properly and may be damaged by using a dirty air filter. Replace the air filter every year, more often if you mow in very dusty, dirty conditions. Do not wash air filter.

TO CHANGE AIR FILTER

1.Remove the air filter by turning

clockwise to the stop and pull away from collar.

2.Remove filter from inside of cover.

3.Clean the inside of the cover and the

collar to remove any dirt accumula- tion.

4.Insert new filter into cover.

5.Put air filter cover and filter into collar aligning the tab with the slot.

6.Push in on cover and turn counter- clockwise to tighten.

SPARK PLUG

Change your spark plug each year to make your engine start easier and run better. Set spark plug gap at .030 inch.

CLEANING

IMPORTANT: For best performance, keep mower housing free of buiLt-up grass and trash. Clean the underside of your mower after each use.

_b.CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with the spark plug.

• Clean the underside of your lawn

mower by scraping to remove build-up

of grass and trash.

• Clean engine often to keep trash from

accumulating. A clogged engine runs

hotter and shortens engine life.

Collar

Slot

Air filter

_lockwise

remove Turn

Turn counter-

• Keep finished surfaces and wheels free

of all gasoline, oil,etc.

• We do not recommend using a garden

hose to clean lawn mower unless the

electrical system, muffler, air filter and

carburetor are covered to keep water

out. Water in engine can result in

shortened engine life.

CLEAN UNDER DRIVE COVER

Air filter cover

clockwise

to tighten

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or dam-

age.

Clean under drive cover at least twice a season. Scrape underside of cover with putty knife or similar tool to remove any build-upof trash or grass on underside of drive cover.

ACAUTION: Before performing any

service or adjustments:

1.Release control bar and stop engine.

2.Make sure the blade and all moving parts have completely stopped.

3.Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See "TO ADJUST CUTTING HEIGHT" in

the Operation section of this manual

REAR DEFLECTOR

The rear deflector, attached between the rear wheels of your mower, is provided to

TO REMOVE/REPLACE DRIVE BELT

1.Remove drive cover. Remove belt from gearcase pulley by pushing down on pulley and rolling belt off it.

2.Turn lawn mower on its side with air filter and carburetor up.

3.Remove blade.

4.Remove debds shield.

5.Remove belt from engine pulley on crankshaft.

6.InstaU new belt by reversing above steps.

7.Always use factory approved belt to assure fit and long life.

Drive

minimize the possibilitythat objects will be thrown out of the rear of the mower

into the operator mowing position, If the deflector becomes damaged, it should be

replaced,

13

Belt

Push down

Page 12 Page 14
Image 13
Page 12 Page 14
Contents CRAFT.TMAWI General Operation II. Slope Operation IV. ServiceII1. Children Cancer and birth defects or other reproductive harm Lawn Mower MaintenanceLawn Mower Performance To Remove Lawn Mower from Carton Howto SET Upyour Lawn Mower To Unfold HandleKnowyour Lawn Mower Meets Cpsc Safety RequirementsEngine Zone Control Howto Useyour Lawn Mower Engine SpeedTo Convert Mower Rear BaggingBefore Starting Engine ADD OIL Drive ControlADD Gasoline To Start EngineMulching Mowingtips This will help engine air flow and extend engine lifeCation Chart Lubrication Chart Maintenance ScheduleGeneral Recommendations Before Each USELawn Mower IL CapacityTires Blade CareGrass Catcher Engine LubricationDrive Wheels Gear CaseClean Under Drive Cover CleaningLawn Mower To Adjust Cutting Height AIR FilterTo Assemble Grass Catcher To Adjust HandleEngine Engine Speed CarburetorEngine OIL Engine Fuel SystemCylinder OtherTroubleshooting Chart Problemcause Troubleshooting Chart Problem Cause Correction Rotary Lawn MOWER- Model no Gear Case Assembly Part Number ROTARYLAWNMOWER- Model Number Rotary Lawn MOWER- Model Number Rotary Lawn Mower - Model Number KEY Part Description Craftsman 4-CYCLE Engine Model Fitting Model NO, 143,016708 LE-FOYER 8OO-4-MY-HOME sMnytime,dayo,night

917.37841 specifications

The Craftsman 917.37841 is a versatile and robust riding lawn mower designed to make lawn care more efficient and enjoyable. With an emphasis on user-friendly features and powerful performance, this model caters to homeowners seeking a reliable machine for maintaining their lawns and gardens.

One of the standout features of the Craftsman 917.37841 is its 42-inch cutting deck. This wide deck allows for a more extensive cutting path, helping users complete their mowing tasks in less time. The multiple cutting height settings, ranging from 1.5 inches to 4 inches, provide versatility to manage different grass types and terrains effectively.

Equipped with a 19 HP Briggs & Stratton engine, the Craftsman 917.37841 delivers reliable power, making it well-suited for various lawn conditions. This engine is known for its durability and ease of maintenance, ensuring that users can count on it for years to come. The hydrostatic transmission enhances the driving experience, allowing for smooth acceleration and easy maneuverability without the need for constant gear shifting.

The Craftsman 917.37841 also features an ergonomic and comfortable seating area, which is essential for longer mowing sessions. The adjustable seat allows users to find their preferred position easily, while the easy-to-reach controls enhance the overall user experience.

One of the key technologies incorporated into this riding mower is the "Yard Command" technology, which integrates advanced features for improved efficiency. This technology can include easy-to-read gauges that provide real-time data on fuel levels and battery status, allowing users to manage their mowing sessions effectively.

Additionally, the Craftsman 917.37841 promotes ease of maintenance with a removable deck for cleaning and servicing. The built-in deck wash system simplifies the cleaning process, helping to prolong the mower's life and maintain its performance.

Overall, the Craftsman 917.37841 combines functionality, comfort, and cutting-edge technology to offer a comprehensive lawn care solution. Whether tackling expansive lawns or navigating tight spaces, this riding mower stands out as a dependable choice for homeowners looking to enhance their outdoor maintenance efforts.
Top Page Image Contents