Craftsman 917.37841 owner manual Troubleshooting Chart Problemcause

Page 16

TROUBLESHOOTING CHART

PROBLEMCAUSE

Does not start 211StaleOutDirtyofairfuelfilter. . .

4.Water in fuel.

5.Spark plug wire is disconnected.

6.Bad spark plug.

7.Loose blade or broken blade adapter.

8.Control bar in released

position.

9. Control bar defective.

Loss of power

1. Rear of lawn mower

 

housing

or cutting

blade

 

dragging

in heavy

grass.

2.Cutting too much grass.

3.Dirty air filter.

4.Buildup of grass, leaves, and trash under mower.

5.Too much oil in engine.

6.Walking speed too fast.

Poor cut -

1.

Worn, bent or loose blade.

uneven

2,

 

 

 

 

Wheel

heights uneven.

 

3.

Buildup

of grass,

leaves

 

 

and trash under

mower.

Excessive

1.

Worn,

bent or loose blade.

vibration

2.

 

 

 

 

Bent engine crankshaft.

Starter rope hard 1. Engine flywheel brake is on

topull

when control bar is released

2.

Bent engine crankshaft.

3, Blade adapter broken.

4.Blade dragging in grass.

Loss of drive

1. Drive wheels not turning

with drive control engaged.

2.Belt not driving

CORRECTION

1.Clean/replace air filter.

2.Fill fuel tank.

3.Drain tank and refill with fresh clean fuel.

4.Drain fuel tank and carburetor and refill tank with fresh gasoline.

5.Connect wire to plug.

6.Replace spark plug.

7.Tighten blade bolt or replace blade adapter.

8.Depress control bar to handle.

9.Replace control bar.

1.Set to "Higher Cut" position.

2.Set to "Higher Cut" position.

3.Clean/replace air filter.

4.Clean underside of mower

housing.

5.Check oil level.

6.Cut at slower walking speed.

1.Replace blade. Tighten blade bolt.

2.Set all wheels at same height

3.Clean underside of mower housing.

1.Replace blade. Tighten blade bolt.

2.Contact a Sears or other qualified service center.

1.Depress control bar to upper handle before pulling starter rope.

2.Contact a Sears or other qualified service center.

3.Replace blade adapter.

4.Move lawn mower to cut grass or to hard surface.

1.Adjust or replace drive control cable.

2.Put belt on pulleys or replace belts if broken.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents CRAFT.TMAWI General Operation II. Slope Operation IV. ServiceII1. Children Cancer and birth defects or other reproductive harm Lawn Mower MaintenanceLawn Mower Performance Howto SET Upyour Lawn Mower To Unfold Handle To Remove Lawn Mower from CartonMeets Cpsc Safety Requirements Knowyour Lawn MowerHowto Useyour Lawn Mower Engine Speed Engine Zone ControlTo Convert Mower Rear BaggingDrive Control Before Starting Engine ADD OILADD Gasoline To Start EngineThis will help engine air flow and extend engine life Mulching MowingtipsMaintenance Schedule Cation Chart Lubrication ChartGeneral Recommendations Before Each USEIL Capacity Lawn MowerTires Blade CareEngine Lubrication Grass CatcherDrive Wheels Gear CaseCleaning Clean Under Drive CoverLawn Mower To Adjust Cutting Height AIR FilterTo Adjust Handle To Assemble Grass CatcherEngine Engine Speed CarburetorEngine Fuel System Engine OILCylinder OtherTroubleshooting Chart Problemcause Troubleshooting Chart Problem Cause Correction Rotary Lawn MOWER- Model no Gear Case Assembly Part Number ROTARYLAWNMOWER- Model Number Rotary Lawn MOWER- Model Number Rotary Lawn Mower - Model Number KEY Part Description Craftsman 4-CYCLE Engine Model Fitting Model NO, 143,016708 8OO-4-MY-HOME sMnytime,dayo,night LE-FOYER

917.37841 specifications

The Craftsman 917.37841 is a versatile and robust riding lawn mower designed to make lawn care more efficient and enjoyable. With an emphasis on user-friendly features and powerful performance, this model caters to homeowners seeking a reliable machine for maintaining their lawns and gardens.

One of the standout features of the Craftsman 917.37841 is its 42-inch cutting deck. This wide deck allows for a more extensive cutting path, helping users complete their mowing tasks in less time. The multiple cutting height settings, ranging from 1.5 inches to 4 inches, provide versatility to manage different grass types and terrains effectively.

Equipped with a 19 HP Briggs & Stratton engine, the Craftsman 917.37841 delivers reliable power, making it well-suited for various lawn conditions. This engine is known for its durability and ease of maintenance, ensuring that users can count on it for years to come. The hydrostatic transmission enhances the driving experience, allowing for smooth acceleration and easy maneuverability without the need for constant gear shifting.

The Craftsman 917.37841 also features an ergonomic and comfortable seating area, which is essential for longer mowing sessions. The adjustable seat allows users to find their preferred position easily, while the easy-to-reach controls enhance the overall user experience.

One of the key technologies incorporated into this riding mower is the "Yard Command" technology, which integrates advanced features for improved efficiency. This technology can include easy-to-read gauges that provide real-time data on fuel levels and battery status, allowing users to manage their mowing sessions effectively.

Additionally, the Craftsman 917.37841 promotes ease of maintenance with a removable deck for cleaning and servicing. The built-in deck wash system simplifies the cleaning process, helping to prolong the mower's life and maintain its performance.

Overall, the Craftsman 917.37841 combines functionality, comfort, and cutting-edge technology to offer a comprehensive lawn care solution. Whether tackling expansive lawns or navigating tight spaces, this riding mower stands out as a dependable choice for homeowners looking to enhance their outdoor maintenance efforts.
Top Page Image Contents