Craftsman 486.24717 manual To Avoid Serious iNJURY

Page 4

TO AVOID SERIOUS iNJURY

Read Owner's Manual and all safety labels on machine before starting and using machine.

Do Not remove top cover or attempt to empty contents of cart while engine is running.

Do Not stand behind cart in exhaust discharge area while engine is running.

Keep hands, feet, face, long hair and clothing out of chipper inlet, vac inlet, and discharge area. There are ROTATING BLADES inside these openings.

Wear approved safety glasses and gloves. Avoid loose fitting clothes.

Keep the area of operation clear of all persons, particularly small children and pets.

Keep all shields and guards (e.g. upper chipper chute extension, discharge chute, nozzle assembly) in place and securely attached.

Check discharge boot frequently for wear. Replace if worn or damaged.

if unit becomes clogged or jammed, shut off engine right away. Do Not attempt to clear clog or jam with engine running.

Muffler and engine get hot and can cause burns. Do Not Touch. To avoid a fire hazard, keep leaves, grass and other combustible debris off hot muffler and engine.

Do Not attempt to remove or attach vac nozzle or optional Hose Kit with engine running.

Do Not operate unit unless nozzle or optional Hose Kit is secured in place.

Do Not fill gas tank while engine is running. Allow engine to cool at least 2 minutes before refueling.

ROTATING CUTTING BLADES. KEEP HANDS AND FEET OUT OF OPENINGS WHILE MACHINE iS RUNNING.

WA I

This unit is equipped with an internal combustion engine and should not be used on or near unimproved forest-covered, or grass-covered land unless the engine'sexhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark attester is used, it should be maintained in effective working order by the operator.

In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark attester muffler is available at your nearest engine authorized service center.

4

Call 1-866-576-8388 for missing parts or assembly help

 

DO NOT RETURN TO STORE

Image 4
Contents CRnFTSMRH Do not Return to StoreWarranty Safety Rules Storage Full Size Hardware ChartCarton Contents Repair Parts Illustrations Assembly Repair Parts ListsDo not Return to Store To Avoid Serious iNJURY Model Number Serial Number Date of PurchaseQTY XyZAACart VAC QTY Description RER DescriptionRemoval of Parts from Cartons Assembling the Cart BodyTruss Head Bolt Wheel Nylock NUTBracket 1/4 Nylock NUT Wheel Axle Flat WasherAssembling VAC Parts Flat Washer HEX BoltLoosen 4 bolts 1/4 turn each Assembly StrapX 1-1/4 Flat WASHERfContents of Hardware Pack for Deck Adapter Assembling the Deck Adapter #62468 Tothe Mower DeckDeck Adapter Mower Deck Use existing holes or drill 5/16 diameter hole or holesAdapter Bracket Nylock NutsHOW to Stop Your CHIP-N=VAC HOW to Startyour CHIP-N=VACHOW to USE Your CHIP-N=VAC Before StartingUsing the Chipper Chute Before Each USE CleaningCheck Tire Pressure Nylock Nuts Access Plate Sharpening or Replacing Chipper BladesPossible Causes ProblemCorrective Action Cal11-866-576-8388formissingpartsorassemblyhelp Do not Returnto Store REE Description 27.20Repair Parts for Model 486.24717 Professional CHIP-N-VAC Adapter #62468DESCRiPTiON QTYQTY.DESCRiPTiON IMPELLER Housing Assembly Description QTYLine Only Ride UP and Down Hill Not Across Hill Degrees MAXMY-HOME