e To attachthe bag,placethe opening of the bag
over the chute deflector so it completely covers the chute opening. Depress the plunger on the draw-
string, and pull on the drawstring until the bag is tight around the chute opening. Release plunger to lock it into position See figure 5,
OPERATnON
KNOWYOURCHIPPER-SHREDDER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHIPPER-SHREDDER_ Compare the illustrations with your chipper-shredder to familiarize yourself with the location of various controls and adjustments Save this manual for future reference
Hopper
Assembl | | |
Chipper | | |
Chute | Fuel | |
Oil Fill | Tank | Release |
|
Dipstic | | Bar |
Engine | Chute | |
Switch | Deflector | |
| |
Choke | | |
Lever. | | |
Starter | | |
Handle | | |
Bag
FIGURE 6--Model247.795861 Shown.
MEETSANSISAFETYSTANDARDS
Sears chipper-shredders conform to the safety standard B71 6-1982 of the American National Standards Institute
OPERATINGCONTROLS(See figure 6)
RELEASE BAR--Used to release the hopper when raising or lowering
CHOKE LEVER--Used to enrich the fuel mixture in the carburetor when starting a cold engine.
STARTER HANDLE--Usedto manually start the engine,
ENGINE SHUT-OFF SWITCH--Used to stop the engine.
FUEL SHUT-OFF VALVE--Used to stop the flow of fuel into the carburetor (located beneath the fuel tank)
BEFORE USING YOUR CHIPPER-SHREDDER, AGAIN REFER TO THE "SAFETY RULES" AS SHOWN ON PAGE 2 OF THIS MANUAL ALWAYS BE CAREFUL,
The operation of any chipper-shredder can result in foreign objects being thrown into the eyes, which can result in severe eye damage Always wear the safety glasses pro- vided with the chipper-shredder or eye shields before chipping or shredding, or while performing any adjustments or repairs. We recommend Wide Vision Safety Mask for over spectacles or standard glasses available at Sears Retail or Catalog Stores
