Instructions

Using the self-cleaning oven.

Operating Instructions Safety

Wipe up heavy soil on the oven bottom.

Before a Clean Cycle

We recommend venting your kitchen with an open window or using a ventilation fan or hood during the first self-clean cycle.

Remove the shelves, broiler pan, broiler grid, all cookware and any aluminum foil from the oven.

The oven shelves can be self-cleaned, but they will darken, lose their luster and become hard to slide.

Soil on the front frame of the range and outside the gasket on the door will need to be cleaned by hand. Clean these areas with hot water, soap-filled steel-wool pads or cleansers such as Soft Scrub®. Rinse well with clean water and dry.

Do not clean the gasket. The fiberglass material of the oven door gasket cannot withstand abrasion. It is essential for the gasket to remain intact. If you notice it becoming worn or frayed, replace it.

Wipe up any heavy spillovers on the oven bottom.

Make sure the oven light bulb cover is in place and the oven light is off.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another well ventilated room.

Consumer Support Troubleshooting Tips Care and Cleaning

How to Set the Oven for Cleaning

Touch the SELF CLEAN pad.

Using the INCREASE or DECREASE pads, enter the desired clean time, if a time other than 4 hours is needed.

Clean cycle time is normally 4 hours. You can change the clean time to any time between 3 hours and 5 hours, depending on how dirty your oven is.

Touch the START pad.

The door locks automatically. The display will show the clean time remaining. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED door light goes off.

When the LOCKED door light is off, open the door.

The oven shuts off automatically when the clean cycle is complete.

■The words LOCKED or LOCK DOOR will flash and the oven control will signal if you set the clean cycle and forget to close the oven door.

■To stop a clean cycle, touch the

CLEAR/OFF pad. When the LOCKED door light goes off indicating the oven has cooled below the locking temperature, open the door.

20

Page 19 Page 21
Page 20
Image 20
GE 164D4290P076 owner manual Using the self-cleaning oven, Operating Instructions Safety, Before a Clean Cycle
Page 19 Page 21

164D4290P076 specifications

The GE 164D4290P076 is a sophisticated and highly efficient component designed for aviation applications, specifically for use in aircraft systems. This product is a part of General Electric's broad portfolio of advanced technologies that cater to the needs of modern aviation, ensuring reliability and performance under varying operational conditions.

One of the primary features of the GE 164D4290P076 is its exceptional durability. Constructed from high-quality materials, this component is capable of withstanding extreme temperatures and pressures, making it ideal for the demanding environments encountered in flight operations. This emphasis on reliability translates into reduced maintenance costs and improved safety for aircraft operators.

In terms of technology, the GE 164D4290P076 incorporates advanced electronic controls and integration capabilities. This allows for seamless communication and interoperability with other avionics systems and components within the aircraft. The design leverages cutting-edge software and hardware to ensure real-time data processing, leading to enhanced system responsiveness and performance optimization.

Another significant characteristic of the GE 164D4290P076 is its energy efficiency. The design focuses on minimizing power consumption while maximizing output, a critical consideration in today’s aviation landscape where fuel efficiency is paramount. By reducing energy waste, this component not only supports sustainability initiatives within the industry but also lowers operational costs for airline operators.

Moreover, the GE 164D4290P076 is engineered to meet stringent regulatory and safety standards prevalent in the aviation sector. Its design and performance specifications adhere to guidelines established by aviation authorities, ensuring that it qualifies for certification and can be integrated into a wide variety of aircraft models.

Lastly, support and service are integral to the GE 164D4290P076’s value proposition. General Electric provides comprehensive maintenance and technical support for this component, helping operators manage their equipment efficiently throughout its lifecycle. This availability of support not only enhances user confidence but also contributes to the component's overall reliability and effectiveness in the field.

In summary, the GE 164D4290P076 stands out as a remarkable component in the aviation sector, combining durability, advanced technology, energy efficiency, regulatory compliance, and robust support services, making it an invaluable asset for modern aircraft systems.
Top Page Image Contents