Manuals / GE / Kitchen Appliance / Range

GE 164D4290P076 owner manual All ranges can tip and injury could result

Models: 164D4290P076

1 32
Download 32 pages 28.04 Kb
Page 2
Image 2

Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock, or to prevent property damage, personal injury, or loss of life.

WARNING ANTI-TIP DEVICE

All ranges can tip and injury could result.

To prevent accidental tipping of the range, attach it to the wall and floor by installing the Anti-Tip device supplied.

To check if the device is installed and engaged properly, remove the kick panel or storage drawer and inspect the rear leveling leg. Make sure it fits securely into the slot.

If you pull the range out from the wall for any reason, make sure the device is properly engaged when you push the range back against the wall. If it is not, there is a possible risk of the range tipping over and causing injury if you or a child stand, sit or lean on an open door.

Please refer to the Anti-Tip device information in this manual. Failure to take this precaution could result in tipping of the range and injury.

2

Page 1 Page 3
Page 2
Image 2
GE 164D4290P076 owner manual All ranges can tip and injury could result
Page 1 Page 3

164D4290P076 specifications

The GE 164D4290P076 is a sophisticated and highly efficient component designed for aviation applications, specifically for use in aircraft systems. This product is a part of General Electric's broad portfolio of advanced technologies that cater to the needs of modern aviation, ensuring reliability and performance under varying operational conditions.

One of the primary features of the GE 164D4290P076 is its exceptional durability. Constructed from high-quality materials, this component is capable of withstanding extreme temperatures and pressures, making it ideal for the demanding environments encountered in flight operations. This emphasis on reliability translates into reduced maintenance costs and improved safety for aircraft operators.

In terms of technology, the GE 164D4290P076 incorporates advanced electronic controls and integration capabilities. This allows for seamless communication and interoperability with other avionics systems and components within the aircraft. The design leverages cutting-edge software and hardware to ensure real-time data processing, leading to enhanced system responsiveness and performance optimization.

Another significant characteristic of the GE 164D4290P076 is its energy efficiency. The design focuses on minimizing power consumption while maximizing output, a critical consideration in today’s aviation landscape where fuel efficiency is paramount. By reducing energy waste, this component not only supports sustainability initiatives within the industry but also lowers operational costs for airline operators.

Moreover, the GE 164D4290P076 is engineered to meet stringent regulatory and safety standards prevalent in the aviation sector. Its design and performance specifications adhere to guidelines established by aviation authorities, ensuring that it qualifies for certification and can be integrated into a wide variety of aircraft models.

Lastly, support and service are integral to the GE 164D4290P076’s value proposition. General Electric provides comprehensive maintenance and technical support for this component, helping operators manage their equipment efficiently throughout its lifecycle. This availability of support not only enhances user confidence but also contributes to the component's overall reliability and effectiveness in the field.

In summary, the GE 164D4290P076 stands out as a remarkable component in the aviation sector, combining durability, advanced technology, energy efficiency, regulatory compliance, and robust support services, making it an invaluable asset for modern aircraft systems.